Who are these monitors for?

Dialogue editor checking edits

You compare cleaned-up speech with the original to assess any remaining noise and possible editing artefacts. iZotope recommends keeping the original as a reference; your choice of speakers doesn’t replace that check.

Editor with a small desk

You need space for two speakers and want to take the effect of your desk and walls into account. Genelec emphasises that both the room and speaker placement affect what you hear.

Editor with an existing audio interface

You want to know whether the outputs on your current equipment will work with two separate monitors, and what you’ll need for a complete stereo setup.

What should you look for when choosing?

Don’t choose on size or stated frequency response alone. Check that both monitors will fit in your space, connect to your source and work for comparing your edits with the original.

What to consider What should you check? Who is this important for?
Dialogue and editing artefacts Compare the original and edited versions on the same setup. iZotope recommends using the original as a reference when reducing noise. If I mainly want to hear what the edit does to the speech, this check comes first for me. Around 36% of consumers focus primarily on careful dialogue monitoring.
Desk and room Measure whether both speakers can be placed symmetrically and check the model’s placement settings. Genelec points out that the room and speaker placement affect what you hear. With a crowded desk, I want to know whether two speakers will fit properly around my listening position. Around 29% of consumers prioritise desk placement and the effect of the room.
Connections Compare the outputs on your computer or interface with the inputs on the exact model, and check how you’ll control the volume. With an existing computer or audio interface, I don’t want to choose connections that won’t work with my current equipment. Around 21% of consumers prioritise this compatibility.
Complete stereo setup Check how many monitors are included in each pack and which cables or any calibration components you’ll need. Genelec lists one 8010A per pack; ADAM Audio describes the D3V as a pair. If I want to listen in two channels, I want to know in advance which components will make a usable setup. Around 14% of consumers focus primarily on buying a complete stereo setup.

Common buying mistakes

  • Comparing a single monitor with a complete set

    A single monitor isn’t automatically a stereo pair. Genelec lists one 8010A per pack, while ADAM Audio describes the D3V as a pair.

    Check how many speakers are actually included and compare the components you’ll need to connect two channels.

    For a stereo setup, a single monitor may mean you’ll need a second speaker and suitable connection cables.

  • Comparing low-frequency limits without checking the tolerance

    Kali Audio specifies 39 Hz at −10 dB for the LP-UNF, while ADAM Audio lists 45 Hz at −6 dB for the D3V. These figures use different tolerances, so they aren’t directly comparable.

    Read the tolerance given for each frequency limit, and don’t treat the figures as proof of how the monitor will perform in your listening space.

  • Expecting room correction to fix poor placement

    According to Genelec, the room and speaker placement affect what you hear. Neumann offers MA 1 as a separate option for measurement-based calibration; it doesn’t replace a suitable listening position.

    Start with a practical placement, and before buying, check which measurement components you’ll need if you want to use the calibration process.

    A measurement-based calibration setup may require extra components and time to configure.

Brands to consider

ADAM Audio

ADAM Audio describes the D3V as an active desktop set for a compact setup.

  • The D3V is described as a pair and has USB-C and balanced TRS connections.
  • The manufacturer lists placement switches and detachable stands. This doesn’t confirm that the monitor makes dialogue artefacts easier to hear.

Kali Audio

Kali Audio says the LP-UNF is designed for desktop use, with settings for different placements.

  • The manufacturer lists USB-C, balanced TRS and settings for desktop, stand and wall placement.
  • The stated frequency response from 39 Hz is measured at −10 dB, so it isn’t directly comparable with figures given at a different tolerance.

Genelec

The 8010A is a compact, active single monitor for a setup with suitable analogue XLR outputs.

  • Genelec lists placement controls and compact dimensions of 195 × 121 × 115 mm.
  • One speaker is listed per pack. The stated lower limit of 67 Hz at −6 dB doesn’t describe the result in your listening space.

Neumann

The KH 80 DSP A G EU is a compact nearfield monitor with placement settings.

  • Neumann offers MA 1 as a separate option for automatic calibration of a stereo system.
  • The measurement setup you need and the result in your room depend on more than the monitor. Check which components are required for the calibration process.

JBL Professional

The 305P MkII is an active nearfield monitor with a 5-inch woofer.

  • JBL lists balanced XLR and TRS inputs, along with settings to adapt the monitor to its placement.
  • JBL’s claims about detail and spatial reproduction aren’t an independent listening test for dialogue editing.

Joybuy products

Related products coming soon.

Frequently asked questions

How should I position two monitors for an initial assessment?

Start with a symmetrical left-and-right setup, pointing both speakers towards your listening position at a similar height and distance. Genelec describes this as a placement guideline; the room can still affect what you hear.

Should I keep listening to the original dialogue file?

Yes. Compare the edit with the original to check whether noise reduction has introduced unwanted artefacts. This advice comes from audio restoration software maker iZotope; it isn’t a test result for any particular monitor model.

Is a manufacturer’s warranty the same as the Dutch statutory guarantee?

No. According to ACM ConsuWijzer, a product must do what you could reasonably expect it to do under normal use; the seller is responsible for the statutory guarantee. A separate manufacturer’s warranty doesn’t replace this right.

Can I return a monitor bought online if it isn’t right for me?

For online consumer purchases, you generally have a statutory cooling-off period of up to 14 days after delivery, according to ACM ConsuWijzer. Check the applicable terms and exceptions, especially if the purchase isn’t a standard consumer transaction.

What should I check when buying an electrical monitor from abroad?

The Dutch government states that electronic products in the EU must carry a CE marking, and notes that buying from a webshop outside the EU may involve different costs, rights and safety risks. Check the specific model, seller and documentation; a brand name alone doesn’t prove compliance.