Who are studio monitors for at a desk?

Mixer working in a tricky room

You want to make mixing decisions at your desk, but walls, furniture and your listening position can all affect what you hear. Genelec and Sound On Sound highlight the importance of positioning and room acoustics.

Mixer short on desk space

You’re looking for two speakers that suit close-range listening and your existing computer or audio-interface setup. Genelec discusses the importance of listening distance, while Kali Audio positions the LP-UNF specifically for desktop mixing.

Mixer checking the bass

You want to know what bass response the stated specifications describe, and what else to check on another system. Yamaha Europe and Genelec list frequency limits measured at different levels.

What should you look for when choosing?

First, measure the available space and listening distance, and check whether you can angle both speakers towards your listening position. Then compare the connections and frequency limits, taking their measurement definitions into account.

What to consider What should you check? Who should consider this?
Positioning and room acoustics Measure the space and listening distance. Check whether you can angle both speakers towards your listening position and whether the model has settings for different positions. When I mix at my desk, I want to know how the walls and listening position affect my judgement; around 33% of consumers prioritise positioning and room acoustics.
Desk space and listening distance Compare the cabinet dimensions, the space needed for a stereo pair and the stated frequency limit, making sure it is based on the same measurement definition. When my desk is also my everyday workspace, I want to fit two speakers without losing sight of the listening distance; around 27% of consumers prioritise desk space and close-range listening.
Checking low frequencies Compare frequency limits only when the measurement level is stated. Yamaha Europe gives 74 Hz for the HS5 and 55 Hz for the HS7 at −3 dB; Genelec gives 67 Hz for the 8010A at −6 dB. These are not directly comparable listening measurements. When I want to assess the bass in a mix, I want to know what the stated limit does and doesn’t tell me about my listening position; around 20% of consumers prioritise bass monitoring.
Connections and stereo pair Check that the inputs suit your audio source and whether the package contains one speaker or a pair. Genelec lists one analogue XLR input for the 8010A, Yamaha lists XLR/TRS for the HS5, and Kali Audio lists USB-C and TRS among the LP-UNF’s connections. I want to connect my existing computer or interface and use two speakers for stereo checks; around 20% of consumers consider connections and what’s included in the set important.

Common buying mistakes

  • Mistaking the price of one speaker for a stereo pair

    Yamaha sells the HS5 individually. You need two speakers for stereo monitoring.

    Check what’s included in the offer and allow for both channels and the cables you’ll need.

    You may need a second speaker and connecting cables.

  • Comparing bass limits without checking how they were measured

    A frequency limit at −3 dB is not the same measurement point as one at −6 dB. Neither tells you on its own how the bass will sound at your listening position.

    Note the dB measurement level alongside each frequency, and take the room and positioning into account too.

  • Assuming room settings can fix poor positioning

    Settings for a particular position won’t eliminate the effects of the room or speaker placement.

    First decide where both speakers can go, then use any positioning settings as part of your setup.

Brands to consider

Yamaha

The HS series includes active nearfield models such as the HS5 and HS7.

  • Yamaha says both models have XLR/TRS connections and ROOM CONTROL.
  • The stated bass limits vary by model and measurement level; these specifications don’t prove that the response will be neutral in your home office.

Kali Audio

Kali positions the LP-UNF as a desktop mixing system; the Lone Pine range also includes the larger LP-6 and LP-8 monitors.

  • Kali says the LP-UNF has USB-C, RCA and balanced TRS connections, among others, as well as settings for different desk and wall positions.
  • Positioning settings don’t prove that room reflections will disappear. The manufacturer’s claims about how mixes translate haven’t been measured in your workspace.

Genelec

The active 8010A is a compact option for listening setups where space is limited.

  • Genelec specifies dimensions of 195 × 121 × 115 mm and one analogue XLR input.
  • The stated lower limit is 67 Hz at −6 dB. Bear this in mind if you want to connect directly to a computer or check very deep bass.

ADAM Audio

ADAM Audio describes the active T5V as a nearfield monitor for small control rooms.

  • ADAM Audio specifies a 5-inch woofer and a rear-firing bass reflex port.
  • The brand’s claims about dispersion and suitability for small rooms don’t prove that every placement close to a wall will work well.

JBL

The active 305P MkII is an option with XLR/TRS connections for use with an audio interface.

  • JBL says this model has Boundary EQ and a three-position high-frequency control.
  • JBL’s claim about a wide listening area is a brand claim; check how the speakers perform in your own room.

Joybuy products

Related products coming soon.

Frequently asked questions

How should I position two monitors for stereo checks?

Angle both speakers towards your listening position. Genelec recommends a 60° angle between the speakers for stereo production, with the listener ideally at the point of an equilateral triangle; the room will still affect what you hear.

Should I buy a subwoofer straight away to assess the bass?

Don’t decide based solely on woofer size or a frequency figure. First compare the stated lower limits and their dB measurement levels, then decide whether you need additional bass monitoring for your mixing work. Genelec discusses bass management and choosing a suitable subwoofer separately.

What if a new monitor develops a fault?

According to the Government of the Netherlands, you’re entitled to a product that works properly, and the retailer is your point of contact if there’s a fault. There is no fixed statutory warranty period; a manufacturer’s warranty is in addition to your statutory rights.

Can I hand in my old personal-use speaker when buying a new one?

The Government of the Netherlands describes the ‘old for new’ scheme for equipment used by private individuals, not for business equipment. Check with the retailer whether this particular speaker and your new purchase are covered by the scheme.

Do workplace noise rules automatically apply to everyone mixing at home?

No, not automatically. The rules described by Arboportaal apply to employers and employees in the workplace; this doesn’t mean they apply to everyone mixing at home for personal use. Exposure is described as a daily dose, not as one general maximum volume for every listener.