Who is this choice for?

Mixers short on desk space

You share your desk and need to fit two speakers around a fixed listening position. Check that you can position them symmetrically; Genelec recommends a 60° angle between the monitors for stereo, with your listening position equidistant from both.

Producers checking kick and bass

You want to make decisions about the low end of a dance mix. Consider both the stated frequency response and the effects of placement and the room; manufacturers don't always use the same measurement criteria.

Mixers in a shared space

You want to be considerate of others who use the desk or room. So, as well as thinking about speaker placement, consider volume, listening times and how you'll carry out quiet checks.

What to consider when choosing

Compact stereo set for your desk

A good fit if: you're short on space for two separate cabinets but can still position them symmetrically. The ADAM Audio D3V and Kali Audio LP-UNF offer USB-C and analogue connections.

Bear in mind: check the dimensions and where your screens sit; a stated low-frequency limit doesn't tell you what you'll hear in the sub-bass on your desk.

Two separate active nearfield monitors

A good fit if: you have a suitable spot for each monitor and the right analogue connections. The Yamaha HS5 and Genelec 8010A are packaged individually.

Bear in mind: you'll need two monitors for stereo, so check your cables, connections and volume control too.

Consideration What should you check? Who is this most important for?
Placement and stereo imaging Measure the available space on both sides of your listening position, including the space next to your screens. Also check the dimensions and placement settings of the specific model you're considering. If I share my desk, I want to fit two speakers without screens or other items getting in the way of a symmetrical setup; around 33% of consumers put placement first.
Checking kick and bass Compare frequency responses only when the stated dB criteria match, and assess the low end from your own listening position. Room controls offer adjustment options, but they don't automatically solve the effects of the room. For a dance mix, I want to assess what the kick and bass are doing, not just compare a frequency figure; around 25% of consumers give assessing the low end top priority.
Sound in a shared space Agree on suitable listening times and volume with others. Check whether you can easily switch your playback chain between monitors and headphones. If other people use the room at the same time, I want to be able to adapt how I work and carry out quiet checks; around 25% of consumers put being considerate of others first.
Connections and what's in the box Check the outputs on your computer or audio interface, the inputs on the exact model you're considering, and whether the box contains one monitor or a stereo pair. I want to know in advance whether my equipment is compatible and whether I'm getting two speakers straight away; around 17% of consumers give connections and a complete set top priority.

Common buying mistakes

  • Mistaking a single monitor for a stereo pair

    Yamaha lists the HS5 and Genelec the 8010A as single monitors. You'll need two of either model for a stereo setup.

    Before deciding, check the number of speakers and the included accessories in the specific listing.

  • Comparing low-frequency limits measured using different criteria

    A frequency figure at −10 dB isn't the same measurement as one at −6 dB or −3 dB. What's more, the room affects what you hear from your listening position.

    Check the dB criterion for each specification, and carry out additional listening checks if you're unsure about the low end where you sit.

  • Checking only the cabinet dimensions

    Two speakers may each fit, but screens or other items could prevent you from positioning them symmetrically for stereo.

    Measure both intended spots and the distance to your listening position before choosing a model.

    You may need stands or a different desk layout to make the setup work.

Brands worth comparing

ADAM Audio

The D3V is a compact active desk set with USB-C for connecting to a computer.

  • According to ADAM Audio, the D3V has USB-C and balanced TRS inputs, detachable stands and switches to adjust for different placements.
  • ADAM Audio states 45 Hz at −6 dB. This isn't an independent measurement of the low end on your desk, and it isn't directly comparable with a limit measured using a different dB criterion.

Kali Audio

Kali Audio describes the LP-UNF as a stereo set for desktop mixing.

  • Kali Audio lists settings for different desk and wall positions, along with USB-C, RCA and balanced TRS inputs.
  • The stated 39 Hz is measured at −10 dB. Kali Audio's claim about stereo imaging is no substitute for assessing the sound from your own listening position.

Yamaha

The HS5 is an active nearfield monitor with analogue connections, for anyone who can position two separate speakers.

  • Yamaha lists XLR and TRS inputs, as well as ROOM CONTROL and HIGH TRIM controls.
  • The HS5 is packaged individually, so you'll need two monitors for stereo. Yamaha states 74 Hz at −3 dB, so don't rely on this monitor alone to assess the deeper bass.

Genelec

The 8010A is a compact, standalone active monitor for a small space with a suitable XLR connection.

  • Genelec lists a width of 121 mm and one analogue XLR input.
  • Genelec packages one monitor per box and states a lower limit of 67 Hz at −6 dB. Its compact size doesn't tell you how to assess deeper bass.

JBL Professional

The 305P MkII is an active 5-inch monitor for anyone considering separate nearfields with analogue connections.

  • JBL lists balanced XLR and TRS inputs, as well as Boundary EQ.
  • JBL's claim of a wide listening area doesn't prove that asymmetrical placement or reflections won't matter at a shared desk.

Joybuy products

Related products coming soon.

Frequently asked questions

How should I position two monitors if I share my desk?

Place the monitors the same distance from your listening position and angle them towards it. For stereo, Genelec recommends a 60° angle between the monitors, with your listening position at the point of an equilateral triangle. Check that your screens and other items allow for this.

Can I tell which monitor is suitable for a dance mix from its lowest frequency?

No, not from that figure alone. Kali Audio states 39 Hz at −10 dB for the LP-UNF, while ADAM Audio states 45 Hz at −6 dB for the D3V; these use different measurement criteria. The room and placement also affect what you actually hear.

Do I always need an audio interface?

Not for every setup. ADAM Audio states that the D3V connects directly to computers via USB-C, and Kali Audio lists USB-C for the LP-UNF. If you're using two separate analogue monitors, check that your source has suitable left and right outputs and find out which cables you'll need.

Which settings should I check again if my desk layout changes?

Check that the left and right speakers are still positioned correctly, then reassess the placement settings from your listening position. Genelec points out that the room and setup continue to affect the sound; room controls offer a way to make adjustments, but they're not an automatic fix.

What are my rights when buying monitors online in the Netherlands?

For distance purchases, you generally have 14 days to change your mind, although the Dutch government (Rijksoverheid) notes that exceptions may apply. Goods are covered by a legal guarantee, but the Rijksoverheid does not set one fixed statutory guarantee period for all products. If a product is faulty, contact the seller.

Do workplace noise rules automatically apply to my shared home desk?

No, not automatically. Arboportaal outlines workplace noise rules and employers' and employees' obligations relating to exposure. This doesn't establish a general volume limit for every shared home desk, so agree on how you'll use the space with the other people in the room.