Who are these monitors for?

Mixers who want to assess kick and bass

You want to judge the balance between kick and bass without mistaking a quoted frequency limit for what you hear in your own room. Genelec points out that monitor placement and room surfaces affect the sound.

Mixers in a shared, quiet home

You work at a modest volume and want to consider the effects of long listening sessions and the possibility of disturbing others. The Dutch government recommends agreeing arrangements for things such as music if there is a risk of disturbing neighbours.

Mixers with a small desk

You want to fit two monitors around your workspace and check in advance that they’ll connect to your computer or audio interface. ADAM Audio describes the D3V as having USB-C and balanced TRS inputs; PreSonus lists several analogue inputs for the Eris 3.5 2nd Gen.

What should you look for when choosing?

First, check whether you can position two monitors symmetrically on your desk and angle them towards your listening spot. Then compare the connections and what’s included in the box, and assess the bass at your usual listening volume.

What to consider What should you check? Who should consider this?
Assessing kick and bass Only compare frequency limits when they use the same dB tolerance. Listen from your usual spot too, and use a second playback reference if needed. If I want to judge the balance between kick and bass, I need to know what the monitors sound like from my listening spot. Around 29% of consumers put assessing bass top of their list.
Listening quietly Check that the volume control is easy to reach, and assess the set at your usual listening volume. If needed, agree arrangements with housemates or neighbours about music levels. If I work in a shared home, I want to listen at my usual volume while being considerate of others. Around 29% of consumers prioritise listening quietly.
Space and placement Measure the available width and depth on both sides of your screen. Position the monitors at a similar distance from your listening spot. If my desk has limited space, I still want to position two cabinets as symmetrically as possible. Around 24% of consumers put placement top of their list.
Connections and stereo setup Compare the outputs on your computer or interface with the inputs on the exact model. Also check whether the box contains one monitor or a pair. If I’m putting together a complete stereo setup, I want to make sure the number of cabinets and the connections are right for my source. Around 18% of consumers prioritise connections and a complete set.

Common buying mistakes

  • Mistaking a single monitor for a stereo pair

    Yamaha sells the HS5 individually, and Genelec lists one 8010A per box. You’ll need two monitors for stereo in this setup.

    Check how many cabinets are included in the specific offer before putting together a set.

  • Comparing low-frequency limits without checking the dB tolerance

    Yamaha quotes the HS5 at both 54 Hz at −10 dB and 74 Hz at −3 dB. These figures describe different points in the frequency response.

    Compare how the figures are measured, and don’t treat a manufacturer’s quoted limit as a guarantee of audible bass from your listening spot.

  • Assuming room settings can fix poor placement

    Room surfaces and monitor placement affect what you hear. An adjustable monitor can’t replace a workable stereo setup.

    First, make room for the most symmetrical setup you can manage. Then use the settings to assess what changes at your listening spot.

Brands to compare

ADAM Audio

The D3V is an active desktop pair for a workspace, with USB-C or balanced TRS connections. The T series includes individual active nearfield monitors.

  • ADAM Audio says the D3V has an easy-to-reach volume control and room adjustment switches.
  • According to ADAM Audio, the T5V has a rear-facing bass reflex port, so follow the manual when positioning it. Manufacturer specifications can’t predict how the bass will sound from your listening spot.

Yamaha

The HS5 and HS7 are active nearfield monitors sold individually, so check whether you need two for stereo.

  • Yamaha lists XLR and TRS inputs, as well as ROOM CONTROL. For the HS5, Yamaha quotes 54 Hz at −10 dB and 74 Hz at −3 dB.
  • The two frequency figures use different dB tolerances, so they aren’t interchangeable. They also don’t tell you what you’ll hear in your room.

Kali Audio

The LP-6 2nd Wave is an active nearfield monitor worth comparing if the quoted low-frequency range and placement are important to you.

  • Kali Audio publishes specifications and measurement data for the LP series.
  • Manufacturer claims about accuracy and how well a mix translates aren’t an independent listening assessment. A quoted frequency range can’t predict how the bass will sound in your home office.

Genelec

The compact 8010A is worth considering when there’s limited space for two separate cabinets.

  • Genelec specifies a width of 121 mm and an analogue XLR input for each monitor. The box contains one 8010A.
  • Genelec quotes a lower limit of 67 Hz at −6 dB. Use an additional listening reference to assess the bass that you can’t reliably judge with these monitors.

PreSonus

The Eris 3.5 2nd Gen is a compact active pair with several analogue inputs.

  • PreSonus lists a front-mounted volume control and a quoted frequency range starting at 80 Hz.
  • That specification doesn’t prove that you’ll be able to assess the deepest sub-bass in a dance track with this set.

Joybuy products

Related products will be available soon.

Frequently asked questions

How should you position two monitors for stereo mixing?

Angle both monitors towards your usual listening spot, starting with a symmetrical setup. Genelec recommends a 60° angle between the monitors and an equilateral triangle; adjust the setup to suit your room.

Is a quoted low frequency enough to judge the bass in your track?

No. Check the corresponding dB tolerance and listen from your usual spot. Genelec points out that monitor placement and room surfaces can cause audible differences in the bass.

How can you reduce listening strain during long sessions?

Keep the volume modest and be mindful of how long you listen. The World Health Organization says that both sound level and exposure time matter; this isn’t a recommendation for a specific mixing volume in your room.