Who are these monitors for?

Producers checking kick and bass

You want to assess the low end of your dance track without mistaking a stated frequency limit for what you’ll hear at your listening position. Genelec and Yamaha provide information about positioning and model specifications, but your room affects the sound.

Producers with a crowded desk

You need space for two monitors alongside your home office equipment. ADAM Audio describes the T5V as a compact nearfield monitor; also measure up to make sure you can position both cabinets symmetrically.

Producers checking stereo details

You want to assess panning and balance from a fixed listening position. Genelec recommends a symmetrical setup, with equal distances on the left and right.

What should you look for when choosing?

First, work out whether two monitors will fit symmetrically on your desk and connect to your equipment. Then compare their low-end performance using the same measurement standard, and bear in mind the effect of your room.

What to consider What to look for Who should pay particular attention?
Checking kick and bass Only compare frequency limits when the dB measurement standard is the same; assess the sound at your own listening position. If I want to hear the balance between kick and bass, I need to know how the monitors perform in my room. Around 36% of consumers prioritise low-end performance.
Positioning on your desk Measure to check that two cabinets will fit, and allow space for connections and any rear-facing ports. If my desk is already crowded, I need room for two well-positioned monitors alongside my work equipment. Around 29% of consumers give ease of placement top priority.
Assessing the stereo image Angle both monitors towards the same listening position, and keep their height and the distances on the left and right equal. If I want to assess panning and stereo balance, I need a consistent listening position. Around 21% of consumers prioritise stereo monitoring.
Connections and what’s included Check that your computer or audio interface outputs match the inputs, and whether the offer includes one monitor or two. If I want to mix in stereo straight away, my equipment needs to connect to both monitors. Around 14% of consumers give a complete, compatible setup top priority.

Common pitfalls

  • Comparing frequency limits without checking the dB measurement

    A lower stated figure doesn’t automatically mean two monitors have been compared on the same basis. Yamaha specifies 74 Hz at −3 dB for the HS5; ADAM Audio states 45 Hz at −6 dB for the T5V.

    Note the corresponding dB measurement for each frequency limit, and assess the low end at your own listening position too.

  • Mistaking one monitor for a stereo pair

    Yamaha and KRK list the HS models mentioned here and the ROKIT 5 Generation Five as single monitors. One cabinet isn’t enough for mixing a stereo image.

    Check how many monitors are included and whether you have two monitors and the connections you need.

    As well as extra equipment, a subwoofer takes time and space to set up and check.

Brands to compare

Yamaha

The active HS series includes the HS5, HS7 and HS8, offering different cabinet sizes and low-end performance.

  • Yamaha specifies frequency limits of 74, 55 and 47 Hz respectively at −3 dB, and lists XLR and TRS inputs.
  • The larger models take up more space. Manufacturer specifications don’t tell you how a monitor will sound in your room.

ADAM Audio

The active T5V is a compact nearfield option for a workspace with limited room for positioning.

  • ADAM Audio lists a 5-inch woofer and a frequency limit of 45 Hz at −6 dB.
  • The T5V has a rear-facing bass reflex port, so allow space behind the cabinet when positioning it. Its −6 dB limit isn’t directly comparable with a −3 dB limit.

JBL Professional

The active 305P MkII is a 5-inch monitor for an analogue setup with XLR or TRS connections.

  • JBL lists Boundary EQ and HF Trim. According to JBL, Boundary EQ can reduce bass boost caused by positioning a monitor on a desk or near a wall.
  • The manufacturer’s description doesn’t guarantee that the monitor will sound good in every room without further adjustments.

KRK

The active ROKIT 5 Generation Five offers different sound modes for anyone producing and making critical comparisons in the same workspace.

  • KRK lists Mix, Focus and Create modes, along with 25 combinations for boundary EQ and tuning.
  • Choose your settings carefully and keep them consistent while comparing. These features won’t automatically correct every room resonance.

Kali Audio

According to Kali Audio, the LP-6 V2 and LP-8 V2 have 6.5-inch and 8-inch woofers respectively.

  • Kali Audio lists a low-frequency limit of 39 Hz for the second-generation LP-6.
  • Don’t compare this figure directly with limits measured using a different dB standard. Also consider the cabinet size and how it will perform in your room.

Joybuy products

Related products coming soon.

Frequently asked questions

How should I position two monitors to assess the stereo image?

Angle both monitors towards your listening position and keep their height and the distances on the left and right equal. Genelec recommends starting with an equilateral triangle, with an angle of 60° between the monitors; then consider reflections and the effect of your room too.

Will a subwoofer automatically make up for a lack of audible deep bass?

No. A subwoofer won’t remove the effects of positioning or room resonances. If you add one, adjust the level, crossover and phase. According to Genelec, positioning a subwoofer against a wall or in a corner can increase its output, but that won’t automatically give you the flattest frequency response.

Do I need a separate amplifier for active or passive monitors?

An active monitor has a built-in amplifier; a passive monitor needs a separate, suitable amplifier. Also check that your equipment’s outputs match the inputs on your chosen model, and that you’re ordering a stereo pair.

What warranty and cooling-off period apply to a purchase by a consumer in the Netherlands?

When you buy from a business as a consumer, you’re entitled to a product that meets reasonable expectations. A commercial warranty doesn’t replace your statutory rights, as Business.gov.nl explains. According to the Dutch government, a 14-day cooling-off period applies to many distance purchases. Check whether these rules apply to your purchase and whether any exceptions apply.

What should I check to make sure an active monitor is safe?

Electrical and electronic equipment sold in the Netherlands must meet the relevant European safety requirements. Business.gov.nl explains that, after checking the applicable requirements, the manufacturer provides the CE marking and an EU declaration of conformity. CE marking isn’t a certification of sound quality. Check the product information for the version you intend to buy.