Who are these studio monitors for?

Mixer who relies on reference tracks

Wants to compare levels, stereo imaging and subtle details consistently against reference tracks. A fixed listening position and keeping settings the same can help; Genelec also explains how the room affects what you hear.

Producer assessing kick and bass

Wants to judge the balance between kick and bass in a dance track and interpret frequency specifications alongside their measurement tolerances. ADAM Audio and Yamaha state frequency limits at different dB measurement points.

Mixer with limited desk space

Needs to place a stereo pair in a confined space or close to walls, and is looking for a setup that suits the listening position. Genelec points out that the room and monitor placement both affect what you hear.

What should you look for when choosing?

First, check that you can position two monitors symmetrically and connect them to your audio source. Then consider which detail and bass decisions matter most for your mix.

What to consider What to check when buying Who is this important for?
Reference detail and stereo imaging Plan a symmetrical position for both monitors and keep your listening position and settings consistent when comparing them. If I want to assess small balance differences against reference tracks, a stable listening position and stereo imaging are important. Around 33% of consumers prioritise reference detail and stereo imaging.
Kick and bass Compare frequency limits only alongside the corresponding dB measurement tolerance; consider a second bass reference if needed. If I want to balance the kick and bass in a dance track, I need to know the measurement conditions behind the stated limit. Around 27% of consumers give bass control top priority.
Placement and room effects Check whether two monitors will fit at similar heights and at similar distances from the surrounding walls. When my desk has limited space, I want to position a stereo pair as evenly as possible. Around 27% of consumers prioritise suitable placement and room effects.
Connections and complete set Check that the inputs are compatible with your audio source and whether the model is sold as a single monitor or a pair. If I want to put together a complete, connectable stereo setup straight away, I need to check the version and package contents carefully. Around 13% of consumers prioritise connections and a complete set.

Things to watch out for when buying

  • Taking a hertz figure without a dB tolerance as proof of better bass

    Manufacturers may state frequency limits using different tolerances. The room also affects how the bass sounds at your listening position.

    Note the measurement tolerance for every comparison, and assess bass decisions using a suitable second listening reference if needed.

  • Ordering a single monitor when you expect a stereo pair

    Yamaha states that the HS5 is packaged individually. IK Multimedia offers a pair version of the iLoud Micro Monitor Pro that includes a measurement microphone.

    Check the exact version and package contents before deciding what you need for a stereo setup.

    A stereo pair may require a second monitor and suitable connection cables.

  • Treating room settings or calibration as a substitute for good placement

    According to Genelec, walls, reflections and left-right symmetry all affect what you hear at the listening position. Settings or calibration won’t automatically eliminate these placement factors.

    First plan two suitable positions, and keep the settings the same when comparing a mix with a reference.

  • Relying on the model name alone when buying in the Netherlands

    The exact model version, the seller and the applicable product information are separate things to check when buying.

    For the specific listing, check the full model name, the sales unit, the seller and the applicable conformity information.

Relevant studio monitor brands

Yamaha

The HS series is an active nearfield option for anyone looking for analogue XLR or TRS connections and manual room and high-frequency controls.

  • Yamaha lists XLR and TRS inputs for the HS5, along with room and high-frequency controls.
  • Yamaha gives figures of 74 Hz at −3 dB and 54 Hz at −10 dB. These measurement points aren’t directly comparable; the HS5 is packaged individually.

ADAM Audio

The T5V is a compact nearfield monitor to consider if you want to take its stated bass limit and the option of adding a subwoofer into account.

  • ADAM Audio specifies a 5-inch woofer, a rear bass reflex port and 45 Hz at −6 dB for the T5V. The manufacturer lists the T10S as a compatible subwoofer.
  • The product specification isn’t an independent measurement at your listening position; placement and the room still have an effect.

KRK

The ROKIT 5 Generation Five is worth considering if you want to use different voicing modes and boundary and EQ adjustment options.

  • KRK lists three voicing modes and 25 combinations of boundary and EQ settings.
  • The features described by KRK don’t guarantee that the settings will solve problems in a room that hasn’t been assessed.

Genelec

The 8030C is an active two-way nearfield monitor for anyone looking to assess an XLR-based setup and a clearly stated frequency reference point.

  • Genelec specifies a single analogue XLR input and 47 Hz at −6 dB for the 8030C.
  • Specifications don’t remove the need for a listening test and a placement plan for your own room.

IK Multimedia

The iLoud Micro Monitor Pro is a compact option when desk space is limited and you want to use a measurement process for the built-in ARC X calibration.

  • IK Multimedia lists XLR and RCA connections, a 3-inch woofer and a measurement microphone with the pair version.
  • Check whether the version is a single monitor or a pair; these are different purchases.

Joybuy products

Related products coming soon.

Frequently asked questions

Can I compare the frequency limits of two monitors directly?

Only if you also take the stated measurement tolerance into account. Yamaha gives figures of 74 Hz at −3 dB and 54 Hz at −10 dB for the HS5; ADAM Audio gives 45 Hz at −6 dB for the T5V. So these lower limits aren’t stated on the same measurement basis.

How should I position two monitors for a repeatable comparison?

Aim both monitors at the same listening position, and try to keep them at the same height and at similar distances from the surrounding walls on the left and right. For music production, Genelec recommends a 60-degree angle between the monitors, with the listener at the point of an equilateral triangle; the room will still affect what you hear.

Who can help if a monitor bought in the Netherlands is faulty?

For a statutory guarantee, the seller is the point of contact for a solution, not the manufacturer. An additional warranty is only worthwhile if its terms offer extra rights; read them before buying.

What product rules apply when selling a new active monitor in the Netherlands?

According to Business.gov.nl, electrical and electronic equipment sold in the Netherlands must comply with the applicable European rules. Where the relevant requirements call for them, this includes CE marking and an EU declaration of conformity. Business.gov.nl emphasises that CE marking isn’t an independent quality mark.

What should I do with an old electrical monitor?

Milieu Centraal explains that when you buy a new, similar appliance, you can return the old one free of charge, including when buying online. If the appliance still works, Milieu Centraal suggests selling it on or taking it to a reuse shop as alternatives.