Producer working alongside colleagues
Wants to be considerate of colleagues who need to concentrate while mixing. Arboportaal points out that noise can cause disturbance and concentration problems even without damaging your hearing.
Use headphones as your primary monitoring option when speakers could disturb colleagues. Compact nearfield monitors make most sense when speaker use has been agreed and you can position a pair properly. Check the connections, and read frequency limits alongside their dB tolerances: figures measured using different limits are not directly comparable, and a placement switch won’t prevent noise from disturbing others.
Wants to be considerate of colleagues who need to concentrate while mixing. Arboportaal points out that noise can cause disturbance and concentration problems even without damaging your hearing.
Wants to check the stereo mix on speakers, but first needs to see whether two monitors will fit in comparable positions around the listening position.
Wants to understand what the stated low-frequency response means for a dance mix, while bearing in mind the effect of the listening position and measurement tolerance.
Choose this when: speaker use hasn’t been agreed, or colleagues need to work without disturbance.
Bear in mind: you won’t be checking the mix through a pair of speakers in the office.
Choose this when: speaker use fits within your office agreements and you can position two monitors properly. Genelec recommends an equilateral triangle for stereo monitoring as the ideal setup.
Bear in mind: reflections and monitor placement affect what you hear.
Choose this when: you have room for a desk-focused set and want to assess different representations of kick and bass.
Bear in mind: a low Hz figure alone doesn’t tell you how reliably you can assess sub-bass in your room.
| What to consider | What should you check? | Who is this important for? |
|---|---|---|
| Avoid disturbing colleagues | Agree when speakers can be used and keep headphones available as an alternative. A volume control doesn’t guarantee that others will find the sound acceptable. | If I don’t want to disturb colleagues, I want to know when speakers are suitable and be able to switch to listening privately. Around 28% of consumers make avoiding disturbance their top priority. |
| Positioning two monitors | Check that both monitors will fit, and try to keep them at a similar distance and height from the listening position. Genelec recommends an equilateral triangle as the ideal setup. | With a small desk, I want to position the left and right monitors as similarly as possible, so the listening position isn’t unnecessarily asymmetrical. Around 22% of consumers put placement first. |
| Assessing kick and sub-bass | Read the frequency limit alongside the dB tolerance. ADAM Audio specifies 45 Hz at −6 dB for the D3V; Kali Audio lists 39 Hz at −10 dB and 54 Hz at ±3 dB for the LP-UNF. | If I’m making a bass-heavy mix, I want to understand what the stated low-frequency limit does and doesn’t tell me, and check my mix on another suitable playback system too. Around 22% of consumers give low-frequency monitoring top priority. |
| Connecting to your equipment | Check the outputs on your computer or interface and compare them with the monitor inputs. ADAM says the D3V operates at 48 kHz/16 bit in USB mode. | If I want to use my existing computer or interface, I want to know in advance which input and cable I’ll need. Connectivity is the top priority for around 17% of consumers. |
| Putting together a complete stereo set | Check whether the version includes one monitor or a pair, and which connections you’ll need. Genelec lists one 8010A per package; PreSonus offers the Eris 3.5 2nd Gen as a pair. | I want to know whether I have two speakers and the right connections before putting together a stereo set. Around 11% of consumers look at this first. |
Genelec lists one 8010A per package, while PreSonus offers the Eris 3.5 2nd Gen as a pair. So the quantities aren’t the same unless you check.
Check how many monitors and which connections are included in the exact version you’re buying.
For stereo use, a version with one monitor may require you to buy a second one and a suitable connection.
Manufacturers state frequency limits using different dB tolerances. Your listening position and room also affect what you hear.
Only compare frequency limits alongside their measurement tolerances, and check important bass decisions on another system too.
Monitor settings won’t automatically change reflections in the room or prevent colleagues from hearing the sound.
First work out where two monitors can go and agree when you’ll use them; keep headphones available as an alternative.
The D3V is a compact desktop set with USB-C and balanced TRS connections.
The Eris 3.5 2nd Gen is sold as an analogue stereo pair and has a headphone output on the front.
The LP-UNF is a desk-focused stereo set with several types of connection and placement settings.
The 8010A is a small active monitor sold individually.
The DJMonitor 42 is a two-piece, DJ-focused desktop set with analogue connections.
Agree on speaker use and suitable times with the people around you. Arboportaal points out that noise can cause disturbance and concentration problems even at levels that don’t damage hearing; there’s no single volume level that works for every shared office. If playback disturbs others, headphones are the more practical primary option.
Angle both monitors towards your listening position, and try to keep the left and right monitors at a similar distance and height. Genelec recommends an equilateral triangle as the ideal setup; reflections and resonances in the room can affect what you hear.
Not on its own. ADAM Audio specifies 45 Hz at −6 dB for the D3V, while Kali Audio lists 39 Hz at −10 dB or 54 Hz at ±3 dB for the LP-UNF; these figures use different measurement limits. The room and setup matter too.
For a typical online consumer purchase, ACM ConsuWijzer says you’ll generally have 14 days from delivery to change your mind, subject to statutory exceptions. If a product doesn’t meet what you could reasonably expect, the Netherlands Authority for Consumers and Markets says the seller is responsible for providing a remedy under the statutory guarantee. A commercial guarantee is separate.