First, choose a setup you can position symmetrically and connect to your mixer or audio interface. A compact pair, such as the PreSonus Eris 3.5 2nd Gen, saves space; individual monitors such as the Yamaha HS5 mean you’ll need to check the pack contents and plan their placement. Match your choice to the inputs on your equipment, and check your broadcaster’s delivery requirements too: the EBU treats loudness assessment for radio as a measurement issue.
Who is this choice relevant to?
Community editor working with different voices
You mix spoken introductions with recordings from different locations, and want to assess differences between voices and transitions. KRK describes the Focus mode on the ROKIT 5 Generation Five as focusing on the midrange; the EBU treats loudness assessment for radio separately as a measurement issue.
Creator in a small workspace
You have limited space for a symmetrically positioned stereo pair and need to consider placement. Genelec points out that both room acoustics and monitor position affect what you hear.
Creator with existing audio equipment
You want to connect the monitors to an existing mixer or audio interface and check that you’ll get a pair, the right inputs and suitable cables. PreSonus, Yamaha and Hercules product specifications show that connections and pack contents vary by model.
What should you look for when buying?
First, work out where you can position two speakers and how to connect them to your existing equipment. Then check whether the listing includes one monitor or a complete stereo pair.
| What to consider |
What should you check? |
Who is this for? |
| Voices and transitions |
Check the listening modes for the specific model and assess how it sounds from your intended listening position. Check your broadcaster’s delivery requirements separately. |
When mixing interviews and spoken introductions, I want to be able to assess differences between voices and transitions. Around 36% of consumers put this first. |
| Workspace layout |
Measure the space for two speakers and check whether you can position them evenly around your listening position. |
When space is limited, I want to know whether a practical stereo setup will fit. Around 29% of consumers give the available space for positioning equipment their highest priority. |
| Connecting to your equipment |
Note the outputs on your mixer or interface and compare them with the inputs on the exact model. |
If I want to keep using my existing mixer or interface, the connection needs to be compatible. Around 21% of consumers put this first. |
| Complete stereo pair |
Check how many monitors are included and which cables come with them. |
If I need a complete stereo setup, I want to know whether the listing includes one speaker or a pair. Around 14% of consumers give this their top priority. |
Buying pitfalls
-
Assuming the box contains a stereo pair
The Yamaha HS5 is packaged individually, while PreSonus sells the Eris 3.5 2nd Gen as a pair. So a listing for one monitor won’t automatically give you a complete stereo setup.
Check the pack contents for the exact listing before working out how many speakers you need.
-
Comparing lower frequency limits without checking the measurement basis
Manufacturers may state frequency ranges using different dB tolerances. Yamaha, for example, gives figures for the HS5 at both −10 dB and −3 dB.
Only compare figures that use the same tolerance, and don’t treat a stated range as a prediction of how the speakers will sound in your room.
-
Assuming every active monitor connects straight away
According to Hercules, the DJMonitor 42 has an RCA main input and a 3.5 mm aux input; the Yamaha HS5 has XLR and TRS inputs.
Check the outputs on your mixer or interface and compare them with the inputs on the model you’ve chosen.
Brands to consider
PreSonus
The Eris 3.5 2nd Gen is a compact model sold as a pair, designed for a workspace with limited room and a range of analogue connection needs.
- PreSonus lists TRS, RCA and ⅛-inch inputs, as well as the cables included.
- The stated range of 80 Hz–20 kHz is a manufacturer specification, not a measurement taken in your room.
Yamaha
The HS5 is an individually packaged active nearfield monitor for anyone putting together a two-speaker setup.
- Yamaha lists XLR and TRS inputs, along with the model-specific ROOM CONTROL and HIGH TRIM controls.
- You’ll need two HS5 monitors for stereo. The stated frequency figures use different dB tolerances.
ADAM Audio
According to ADAM Audio, the T5V is designed for small control rooms, including broadcast production spaces.
- ADAM Audio lists a 5-inch woofer and a frequency range starting at 45 Hz at −6 dB.
- The bass reflex port is at the rear. Placement and assessment of low frequencies still depend on the room; the product claim is not an independent listening test.
Genelec
The 8010A is a small, individually packaged monitor for limited setup space and a compatible XLR connection.
- Genelec specifies a width of 121 mm and a lower frequency limit of 67 Hz at −6 dB.
- You’ll need two monitors for stereo. Only compare lower frequency limits with figures that use the same measurement basis.
KRK
According to KRK, the ROKIT 5 Generation Five has listening modes for different production tasks.
- KRK lists Mix, Focus and Create modes, as well as acoustic adjustment options.
- These are manufacturer specifications and claims about intended use, not independent evidence that voices will be clearer in your workspace. The product page lists one monitor.
Hercules
The DJMonitor 42 is a stereo set with analogue connections for a straightforward setup.
- Hercules lists two 4-inch speakers, RCA, 3.5 mm aux and bass and treble controls.
- The connection may be a limitation for equipment with XLR or TRS outputs; check how it will connect to your existing setup.
Joybuy products
Related products will be available soon.
Frequently asked questions
How should you position two monitors for mixing interviews?
Position the monitors as symmetrically as possible, angle them towards your listening position and use an equilateral triangle as a starting point. Genelec points out that reflections and room acoustics also affect what you hear.
Can you assess broadcast loudness using your monitors alone?
No. Monitors alone can’t determine the broadcast level. For radio, the EBU provides guidelines for audio control based on loudness measurement; you should also check your broadcaster’s specific delivery requirements.
What if a monitor you bought online isn’t suitable for your setup?
In many cases, distance purchases come with a 14-day cooling-off period, although there are exceptions. You also have statutory rights if a product is faulty; the Dutch government says the seller must provide a solution if something goes wrong.
Can you broadcast music you’ve found or other local material without permission?
No. Mixing material yourself doesn’t automatically give you permission to make copyright-protected work available to the public. The Dutch government distinguishes between private use and distribution or making work available to the public; BumaStemra outlines a licensing route for music use by a local public broadcaster. Check separately which rights have been arranged for your material and broadcaster.
How can you protect your hearing during long mixing sessions?
Don’t listen at unnecessarily high volumes, and limit prolonged exposure to loud sound. VeiligheidNL points out that both sound level and exposure time matter; the maximum SPL in a product specification isn’t a recommended listening volume.