Who is this guide for?

Speech mixer for community radio

Edits conversations, announcements and short music clips, and wants to hear what’s in the recording while mixing. Look for connections that work with your existing audio setup; Genelec describes using studio monitors for tasks including mixing and broadcasting.

Creator with a small desk

Needs room for a stereo pair alongside a screen and control equipment. Check the cabinet dimensions, listening distance and placement; Genelec highlights the importance of the distance to the monitors and the listener’s position.

Presenter who also mixes

Uses speakers for playback or editing, but considers monitoring with an open microphone separately. Shure explains how sound from a speaker can be picked up again by a microphone and cause feedback.

What should you look for?

What to consider What should you check? Who is this important for?
Assessing speech and music Compare frequency specifications only when they use the same dB measurement basis. Yamaha lists 85 Hz at −3 dB and 70 Hz at −10 dB for the HS3; these figures aren’t directly comparable. If I’m mixing speech and short music clips, I want to assess the differences without misreading the bass figures. Around 36% of consumers put speech and clips first.
Room for a stereo pair Measure the space on either side of your screen and check the dimensions and listening position. Genelec recommends an equilateral triangle, with a 60° angle between the monitors. With a small desk, I want to position two monitors symmetrically without crowding out my other equipment. Around 29% of consumers prioritise desk placement.
Playback when using microphones Work out when microphones will be open and whether your mixer or interface has a suitable headphone monitoring route. According to Shure, sound from speakers can reach an open microphone again and cause feedback. When I’m presenting with an open microphone, I want to listen back without speaker sound getting back into the microphone. Around 21% of consumers prioritise monitoring while using a microphone.
Connections and what’s included Make a note of the outputs on your mixer or computer, and check whether the package contains one monitor or a pair. Yamaha lists a pair of HS3 monitors; Genelec lists one 8010A per package. I want the monitors to connect to my equipment, and I don’t want to end up with just one cabinet by mistake. Around 14% of consumers prioritise connections and a complete set.

Common buying mistakes

  • Assuming a headphone output is a complete live monitoring solution

    An output on the speaker doesn’t tell you how the signal is routed through your mixer. What’s more, speaker sound can be picked up again by an open microphone and cause feedback.

    Before choosing, map out the signal path between the microphone, mixer, headphones and speakers. Check when the microphone is open and which monitoring route you’ll use at that point.

  • Comparing frequency limits without checking the dB value

    Yamaha lists different lower limits for the HS3 at −3 dB and −10 dB. These are different measurement levels, so the figures aren’t directly comparable.

    Compare frequency specifications only when they use the same measurement basis, and take the placement in your workspace into account too.

  • Assuming every product listing includes a stereo pair

    Yamaha lists the HS3 as a pair, while Genelec lists one 8010A per package.

    Check what’s included in the specific offer, which cables you’ll need, and whether you need to buy two units for stereo.

Brands to consider

Yamaha

The HS3 is a compact stereo pair for anyone looking to connect their existing audio equipment.

  • Yamaha lists combo, RCA and stereo mini-jack inputs, and a width of 132 mm per cabinet.
  • The stated lower limit varies depending on the measurement basis: 85 Hz at −3 dB and 70 Hz at −10 dB. This isn’t an independent performance comparison.

ADAM Audio

ADAM Audio says the D3V is designed for desktop monitoring, with computer and analogue connection options.

  • The manufacturer lists USB-C, two balanced TRS inputs, removable stands and room compensation.
  • USB-C doesn’t automatically make it compatible with an existing mixer; check your equipment’s outputs. Performance claims haven’t been independently tested here.

Genelec

The 8010A is a small monitor sold individually, for use with a compatible XLR signal path.

  • Genelec lists dimensions of 195 × 121 × 115 mm, including the Iso-Pod, and adjustable room compensation.
  • Each package contains one monitor, so you’ll need two for stereo. The claim of neutral reproduction isn’t based on an independent measurement in this workspace.

Kali Audio

Kali describes the LP-UNF as a system for very close listening when mixing at a desk.

  • Kali describes settings for different desk and wall positions.
  • Claims about clarity and how well a mix translates are made by the manufacturer and haven’t been independently verified for this radio workspace.

Hercules

The DJMonitor 42 is an active stereo set with front-panel controls and a DJ-focused design.

  • Hercules lists bass and treble controls, as well as a headphone socket.
  • A DJ-focused design doesn’t prove that the set is more accurate for critical speech mixing.

Joybuy products

Related products will be available soon.

Frequently asked questions

Can I leave the speakers on while presenting?

If the presenter’s microphone is open, speaker sound can get back into the microphone and cause feedback. In that situation, use a suitable headphone monitoring route, and assess the speaker mix when there’s no risk of this happening.

How should I position two monitors on a small desk?

Angle both monitors towards your listening position and keep the setup as symmetrical as possible. Genelec recommends an equilateral triangle, with a 60° angle between the monitors; check that your desk has enough room before you buy.

Do I need to order two separate monitors?

It depends on the model and the offer. Yamaha lists the HS3 as a pair, while Genelec lists one 8010A per package, so check what’s included in the specific offer.

How do I compare the bass response of different monitors?

Compare the frequency limits only when they use the same measurement basis. Yamaha lists 85 Hz at −3 dB and 70 Hz at −10 dB for the HS3; these figures describe different measurement levels.

Does a CE mark prove that a monitor sounds good?

No. Your Europe and Business.gov.nl describe CE marking in relation to applicable EU product requirements, not as a quality mark. You’ll need to check which requirements apply and whether they’ve been met for the exact product version.