Who are these monitors for?

Radio mixer assessing speech detail

Wants to assess voice levels, intelligibility and subtle differences against reference audio from a fixed listening position. Genelec explains how symmetrical positioning helps you assess left-to-right balance; Sound On Sound discusses the ADAM Audio D3V’s suitability for desktop use.

Creator with a small mixing desk

Has limited space beside their computer and is looking for a stereo pair that fits the available area, without adding unnecessary playback equipment. ADAM Audio lists USB-C and balanced TRS inputs for the D3V.

Creator with an existing audio interface

Wants to connect two monitors to the available outputs and check in advance which inputs, cables and pack sizes are needed. Yamaha and JBL Professional list XLR and TRS inputs for the models mentioned; Focusrite explains when a connection is balanced.

What should you look for when choosing?

Start with your room and listening position, then check the connections and make sure you can set up a complete stereo pair.

What to consider What to look for Who is this important for?
Speech balance and mix detail Compare frequency limits measured at the same dB point and position two monitors symmetrically around your listening spot. Genelec recommends placing your listening position at the tip of an equilateral triangle. I want to assess voices and subtle differences against reference audio from my regular listening spot; around 36% of consumers rank mix detail as their top priority.
Space and positioning Measure whether two cabinets will fit, including their cables. JBL Professional lists Boundary EQ and HF Trim as adjustment options, not as a substitute for suitable positioning. I need to fit two monitors in without losing sight of my listening position; around 29% of consumers prioritise space and positioning.
Connection to your mixing setup Check the left and right outputs, monitor inputs and volume control. According to Focusrite, a connection is only balanced if both the source and the monitor have suitable connections. I want to connect to my existing computer or audio interface without overlooking the connections I need; around 21% of consumers put compatibility first.
Complete stereo pair Check how many speakers are included in the box. ADAM Audio describes the D3V as a pair; Yamaha lists the HS5 and Genelec the 8010A as individual units. I want to know in advance what I need to set up a working stereo pair; around 14% of consumers make a complete setup their top priority.

Common pitfalls

  • Taking a low frequency limit as proof of detailed bass

    Yamaha, ADAM Audio and Genelec state frequency limits measured at different dB points. Your room also affects what you hear from your listening spot.

    Compare specifications measured at the same point and listen to familiar reference tracks where you mix.

  • Assuming a box containing one monitor is a stereo pair

    Yamaha lists the HS5 as an individual unit and Genelec one 8010A per package, while ADAM Audio describes the D3V as a pair.

    Check the number of speakers and the connection equipment you’ll need before comparing models.

  • Treating room settings as a substitute for positioning

    Your listening position and reflections affect the stereo image. Adjustment options don’t prove that every setup will be suitable.

    First make room for a symmetrical pair, then adjust the available controls to suit their positioning.

  • Using monitor speakers while a presenter’s microphone is open

    Sound from the speakers can be picked up by the microphone again and cause acoustic feedback, as Shure explains.

    Check your microphone and monitor routing before going live, and prevent speaker sound from feeding back into an active microphone.

Brands to consider

ADAM Audio

The D3V is a compact desktop set for a computer-based mixing setup.

  • ADAM Audio lists USB-C, balanced TRS inputs and detachable stands; Sound On Sound describes the model as suited to desktop workflows.
  • The stated low-frequency limit is measured at −6 dB. On its own, this doesn’t determine how the bass will sound from your listening spot.

Yamaha

The HS5 is an individually packaged active nearfield monitor for a setup with suitable analogue outputs.

  • Yamaha lists XLR and TRS inputs, along with ROOM CONTROL and HIGH TRIM controls.
  • The HS5 is sold individually. Yamaha gives frequency limits at different dB measurement points; don’t compare them as if they were measured on the same basis.

JBL Professional

The 305P MkII is an active nearfield monitor with analogue connections and positioning controls.

  • JBL Professional lists balanced XLR and TRS inputs, Boundary EQ and HF Trim.
  • These controls don’t prove that poor acoustics or every positioning choice can be fully corrected.

Genelec

The 8010A is a compact, individually packaged monitor with an analogue XLR connection.

  • Genelec lists dimensions of 195 × 121 × 115 mm, including the Iso-Pod.
  • The stated lower limit of 67 Hz is measured at −6 dB. Check whether its bass response suits the work you do from your listening spot.

KRK

The ROKIT 5 Generation Five offers adjustment options for anyone who wants to compare different monitor settings.

  • KRK lists Mix, Focus and Create modes, along with 25 EQ combinations.
  • These are manufacturer specifications, not independent confirmation of better mixing results. Use the same settings consistently when comparing reference tracks.

Joybuy products

Related products coming soon.

Frequently asked questions

Can you play studio monitors while presenters are speaking into an open microphone?

Not without checking the monitoring signal path: sound from the speakers can be picked up by the microphone again and cause feedback. Shure describes this risk as acoustic feedback. So check the routing before using the microphone and monitors at the same time.

Do balanced cables help prevent hum?

According to Focusrite, a balanced connection can reduce the chance of audible hum. Both the source and the monitor need suitable balanced connections, so check that the cable matches them too.

What if a monitor bought online breaks sooner than you’d reasonably expect?

For a consumer purchase in the Netherlands, the seller must fix a product free of charge if, under normal use, it fails to meet what you could reasonably expect under the legal guarantee, according to ACM ConsuWijzer. For online purchases from a business, you’ll also often have a 14-day cooling-off period, as explained by the Dutch Government.

Can you broadcast copyrighted reference music?

Listening back privately is not the same as broadcasting music to the public. The Dutch Government makes clear that a home copy may not be made available to the public; BumaStemra describes a music licence for broadcasts by a local public broadcaster. Check the rights for the specific material and type of broadcast: a studio monitor does not grant broadcasting rights.

Does a CE mark tell you anything about a studio monitor’s sound quality?

No, a CE mark is not an assessment of sound quality. For products covered by applicable harmonised EU rules requiring CE marking, the manufacturer declares that the product complies with those rules. The rules that apply to a specific version depend on the product.