Who are these options for?

Choir editor working beside glass

You assess voices and spaciousness from a fixed listening position beside a window. Genelec describes glass as a reflective surface; a symmetrical setup helps keep reflections similar on the left and right.

Editor with a small desk

You want to fit two monitors around your screen and need connections that work with your computer or audio interface. According to the manufacturer, the ADAM Audio D3V has USB-C and balanced TRS inputs.

Editor fine-tuning the room sound

You can position a stereo pair and want to assess whether manual placement settings or optional measurement-based alignment would suit your room. Neumann offers optional MA 1 alignment with a measurement microphone for the KH 80 DSP.

What should you look for when choosing?

For this workspace, start with a symmetrical stereo setup. Then compare the connections and cabinet size with your desk and equipment.

What to consider What to look for Who should consider this?
Stereo placement and window reflections Check whether two speakers will fit at the same height and distance. Also consider reflections from the glass, desk and screen. If I work beside a window, I want similar reflections on the left and right, and a stable stereo image. Around 36% of consumers are most concerned about window reflections and stereo placement.
Voices and spaciousness Check your listening distance and whether you can aim the monitors from a stable, symmetrical position. When assessing choir balance, I want to judge voices and spaciousness from my usual listening position. Around 29% of consumers prioritise this.
Desk space and connections Compare the dimensions and connections with your equipment. Also check whether the box contains one speaker or a pair. If my desk is already full, two monitors need to fit and connect to my computer or interface. Around 21% of consumers prioritise workspace and connections.
Bass response and space for placement Check the dB reference used for frequency limits and compare them only on the same measurement basis. Make sure the size will fit on your desk. If I also want to assess low frequencies, the monitor needs to fit without compromising the setup around the window. Around 14% of consumers are most concerned about bass response.

Common pitfalls

  • Assuming a lower frequency figure means better bass

    Manufacturers may quote frequency limits at different dB measurement points. Those figures are not directly comparable and, on their own, do not tell you how a choir recording will sound from your listening position.

    First compare the measurement basis, then assess the monitors from the same listening position.

  • Mistaking one monitor for a stereo pair

    Yamaha states that the HS5 is packaged individually; Genelec also lists one 8020D per box. So, for a stereo pair, check the number of speakers and the connections you’ll need.

    Before you order, check how many monitors are included in your chosen version and which cables will work with your equipment.

  • Using room correction as a substitute for good placement

    Settings or measurement-based alignment will not automatically remove reflections from a window. The Neumann KH 80 DSP’s automatic MA 1 alignment also requires a measurement microphone.

    First set up your listening position symmetrically and assess reflections around the window. Then see whether adjustments or measurement-based alignment could help further.

Brands to consider

ADAM Audio

According to ADAM Audio, the D3V is a compact active desktop set with USB-C. The T5V is a separate analogue nearfield monitor for small control rooms.

  • The D3V has TRS inputs, included feet and placement switches.
  • The T5V has a rear-facing bass reflex port; the product specifications don’t tell you how it will sound beside your window.

Yamaha

The HS5 is an analogue 5-inch active nearfield monitor for anyone wanting to position two separate speakers.

  • Yamaha lists XLR and TRS inputs, along with ROOM CONTROL and HIGH TRIM controls.
  • The box contains one speaker. Compare frequency limits only when the dB measurement basis also matches.

Genelec

According to Genelec, the 8020D is a compact active nearfield monitor for a workspace where room is limited.

  • Genelec lists dimensions of 242 × 148 × 142 mm including the Iso-Pod, and a frequency response from 56 Hz at −6 dB.
  • The box contains one monitor. Its dimensions and frequency specification don’t tell you how your room’s reflections will affect the sound.

Neumann

The KH 80 DSP A G EU is a compact active nearfield monitor for a workspace where placement settings or optional measurement-based alignment are desirable.

  • Neumann lists placement settings and MA 1 alignment with a measurement microphone.
  • Measurement-based alignment does not prove that calibration will completely resolve window reflections.

Kali Audio

The LP-6 V2 from the Lone Pine series is a larger active nearfield option to consider when both workspace and bass response matter.

  • Kali highlights listening distance, dynamics, bass response and the space required as points to consider when choosing.
  • The manufacturer’s descriptions are not independent test results for assessing choir recordings beside a window.

Joybuy products

Related products will be available soon.

Frequently asked questions

Will a blackout curtain also help reduce sound reflections?

It depends on the material. Genelec describes heavy curtains as absorbent and glass as reflective; a thin curtain will not automatically deal with low frequencies. Assess the setup from your listening position.

How should I position a stereo pair for editing choir recordings?

According to Genelec’s placement advice, position the speakers symmetrically and aim them towards your listening position, preferably in an equilateral triangle. Also watch out for early reflections from the window, your desk and other hard surfaces.

Can I connect a studio monitor directly to my computer?

It depends on the model and your computer’s outputs. According to the manufacturer, the ADAM Audio D3V has USB-C and balanced TRS inputs; the Yamaha HS5 has analogue XLR and TRS inputs. Check that these connections are compatible with your equipment.

How can I check whether I’m buying a pair, and what about the warranty?

Check whether the box contains one or two speakers and which connections you need. According to the Dutch Government, statutory warranty in the Netherlands has no fixed term: what you can reasonably expect from the product is what matters. If a product is faulty, contact the seller.

Which Dutch rules apply when buying active monitors online?

The Dutch Government states that electronic devices on the EU market must carry a CE mark. When you buy online from a business, you will often have a 14-day cooling-off period; check the seller and the terms that apply to your purchase. A CE statement on a brand page does not automatically verify an individual item for sale.