Choir editor assessing vocal detail
You want to assess edits, vocal balance and stereo positioning, and can set up a symmetrical stereo pair. Genelec recommends using an equilateral triangle as the starting point for stereo listening.
Start with a stereo pair that you can position symmetrically at ear height and connect to your audio source. Then choose based on your room and whether you also want to assess the low end of your choir recording. Compact monitors take up less space, while a larger setup or room calibration offers different possibilities, but neither will automatically fix poor positioning or room acoustics. Only compare frequency ranges when they use the same dB measurement limit.
You want to assess edits, vocal balance and stereo positioning, and can set up a symmetrical stereo pair. Genelec recommends using an equilateral triangle as the starting point for stereo listening.
You have limited space for positioning and are weighing up compact monitors against low-frequency response and connectivity. Sound On Sound discusses how smaller monitors can be useful at shorter listening distances and lower volume levels.
You want to assess low frequencies as well as vocal detail, and have room for a larger or additional listening setup. Compare stated frequency limits using the corresponding measurement conditions.
| What to consider | What should you check? | Who is this important for? |
|---|---|---|
| Vocal detail and stereo image | Check whether you can position two monitors symmetrically, at the same height and facing your listening position. Genelec recommends a 60° angle between the monitors as a starting point for stereo. | If you’re assessing the balance and positioning of choir voices, you’ll want to set up the left and right monitors in comparable positions. Around 33% of consumers give vocal detail and stereo image top priority. |
| Desk space | Measure whether two cabinets will fit while leaving room for a symmetrical setup. Also check the position of the bass reflex port and the manufacturer’s positioning recommendations. | If your desk has limited space, you’ll want to know whether a stereo pair will actually fit. Around 27% of consumers prioritise suitable positioning in their home office. |
| Low end of the recording | Only compare frequency ranges using the same dB measurement limit; decide whether you want to assess the low end with this setup or use an additional one. | If you want to check the low frequencies in your recording, the measurement basis for the stated frequency limit matters. Around 20% of consumers give low-frequency assessment top priority. |
| Connections and setup | Compare the inputs on the exact model with the outputs on your audio source. Check how many speakers are included in the package and whether measurement-based calibration requires additional equipment. | If you want to create a working setup with your existing equipment, you’ll need to know which connections and components are required. Around 20% of consumers prioritise connectivity and a complete setup. |
Genelec states that the 8010A is supplied as one monitor per package. You’ll need two speakers for stereo.
Before buying, check how many speakers are in the package and whether the offer is for a single unit or a pair.
Yamaha gives both a −10 dB limit and a −3 dB limit for the HS5. The quoted ADAM Audio and Genelec specifications use a −6 dB limit, so these figures are not based on the same measurements.
Note the dB measurement limit for each frequency figure and base your comparison on like-for-like specifications.
Reflections and an asymmetrical setup can affect what you hear. DSP or another form of room calibration won’t automatically remove these positioning issues.
Plan a symmetrical setup first, then check what calibration and equipment your chosen approach requires.
For measurement-based calibration with Neumann MA 1, Neumann lists a measurement microphone, a suitable computer, an audio interface and network connections among the requirements.
The Genelec 8010A is a compact active model to consider if you have limited space at your workstation.
The active HS5 is a near-field monitor with manual room and high-frequency controls.
According to ADAM Audio, the active T5V is designed for small control rooms; assess how it will work in your own room separately.
The active 305P MkII offers adjustable options for exploring how the monitors sound in your listening environment.
The KH 80 DSP is a compact monitor option for anyone looking to explore measurement-based calibration.
For stereo, Genelec recommends a symmetrical setup, with both monitors at the same height and facing the listening position. Genelec suggests a 60° angle between the monitors as a starting point. This is the manufacturer’s positioning advice, not a guarantee that the room will sound acoustically neutral.
The active models discussed here have built-in amplification. However, check that the input on the exact model matches the output on your audio source, and whether you’re buying one monitor or a stereo pair.
Neumann’s documentation lists an MA 1 measurement microphone, a suitable computer, an audio interface with a microphone input and 48 V phantom power, enough audio outputs, and network connections for the speakers, among other things. Check the system requirements for your own computer.
According to the Dutch government, there is no fixed statutory warranty period in the Netherlands; if a product is faulty, the retailer is your point of contact for a product that is fit for purpose. For many online distance purchases from a business, you have 14 days to change your mind, although exceptions apply. Check the terms that apply to your specific purchase.
According to Business.gov.nl, electrical and electronic products sold in the Netherlands must comply with the applicable European rules. This government portal states that a CE mark is not a quality mark; check the product information and relevant documentation for the exact model.