Who are these monitors for?

Choir editor with limited desk space

You want to position two speakers either side of your screen and assess the vocal balance from one fixed listening position.

Editor with an audio interface

You use separate monitor outputs and want to choose how to connect and position two active speakers.

Editor working in a challenging listening room

Your desk or room affects what you hear, so you want to take placement controls or optional measurement-based calibration into account.

What should you look for?

Start with a two-speaker setup and compatible outputs, then compare the adjustment options and low-frequency specifications, taking their measurement conditions into account.

What to consider What should you check? Who is this important for?
Space for a stereo pair Measure the space available for both speakers and check whether the sales unit contains one monitor or a pair. I want to fit both speakers either side of my screen and listen from one fixed position. Around 33% of consumers say fitting speakers on a small desk is their main concern when buying.
Vocal layers and stereo balance Assess the left and right channels from the same listening position and aim for a symmetrical setup; Genelec recommends positioning the listening point and speakers symmetrically. I want to assess differences between choir voices and the balance between left and right. Around 27% of consumers say assessing vocals and stereo is their main concern when buying.
Connecting to your audio source Compare the outputs on your computer or interface with the inputs on the exact model. ADAM Audio lists USB-C and balanced TRS for the D3V; Genelec specifies one XLR input per 8010A monitor. I want to connect both speakers to my current computer or interface without using an unsuitable signal path. Around 20% of consumers say connecting to their audio source is their main concern when buying.
Desk, room and bass Check the placement controls and any calibration requirements; compare frequency specifications only when the stated measurement conditions match. I want to take reflections from my desk or room into account when assessing choir recordings. Around 20% of consumers say the effect of the room and bass reproduction are their main concerns when buying.

Common buying mistakes

  • Mistaking a single monitor for a stereo pair

    Genelec states that each 8010A pack contains one monitor. So don’t assume you’re getting two speakers if the listing is for a single unit.

    Brands to consider

    ADAM Audio

    ADAM Audio describes the D3V as a compact active desktop stereo system with USB-C and balanced TRS connections.

    • ADAM Audio states that stands and placement controls are included.
    • According to ADAM Audio, the D3V processes USB internally at 48 kHz/16-bit; bear this model-specific limit in mind when choosing.

    Kali Audio

    Kali describes the LP-UNF as a desktop mixing system. The IN-UNF is a different setup with two satellite speakers and a separate bass unit.

    • Kali lists placement settings and several inputs for the LP-UNF.
    • Check which version, including its speakers and bass unit, will fit on your desk; claims about a clear stereo image are the manufacturer’s own.

    Genelec

    The 8010A is a compact active monitor sold individually, with one XLR input per unit.

    • Genelec lists dimensions of 195 × 121 × 115 mm including the Iso-Pod.
    • The stated low-frequency limit is 67 Hz at −6 dB; this figure alone does not describe bass reproduction in your room. You’ll need two units for stereo.

    Neumann

    The KH 80 DSP is a compact active nearfield monitor for separate positioning, with adjustment options.

    • Neumann lists a switch for different desk placements.
    • MA 1 is an optional measurement-based calibration system; check what equipment you’ll need beforehand.

    IK Multimedia

    The iLoud Micro Monitor Pro is worth considering if a compact size and measurement-based calibration are important to you.

    • According to IK Multimedia, the Pair version includes two monitors and an ARC measurement microphone.
    • The Single version does not include a measurement microphone, so check which version the listing is for.

Joybuy products

Related products coming soon.

Frequently asked questions

Should I buy one monitor or a pair for editing choir recordings?

Choose a left and right speaker if you want to assess stereo balance through speakers. Position them as symmetrically as possible and check what the sales unit contains: Genelec states that each pack contains one 8010A, while IK Multimedia describes a separate Pair version of the iLoud Micro Monitor Pro.

How should I set up monitors on a small desk?

Start with a symmetrical setup, place both speakers at the same height and angle them towards your listening position. For music production, Genelec recommends an equilateral listening triangle where possible and points out the effect of reflections; then check which placement controls your model offers.

Does automatic room calibration replace good positioning?

No, measurement-based calibration is no substitute for a suitable speaker setup. Your room and the position of the monitors affect what you hear; also check whether the measurement microphone you need is included with the version you’ve chosen.

Will USB-C work with every computer or audio interface?

Not necessarily: check that your source’s output matches the input and signal path of the exact monitor model. ADAM Audio lists USB-C and balanced TRS inputs for the D3V, and specifies internal processing at 48 kHz/16-bit over USB.

Is CE a quality mark for good sound?

No, CE does not assess sound quality or suitability for editing choir recordings. Business.gov.nl outlines the applicable product safety and conformity requirements for electrical equipment sold in the Netherlands; manufacturers must draw up an EU declaration of conformity for the relevant requirements and affix the required CE marking. This alone says nothing about whether a specific version is compliant.