Who is this buying guide for?

Choir recording mixer

You want to assess vocal sections and additional audio material in a stable stereo image, and have room for two symmetrically positioned monitors. Genelec describes positioning two monitors as the starting point for a stereo listening setup; iZotope covers vocal clarity and placement in a mix.

Mixer in a small room

You mix close to a desk or walls, so you need to consider size, positioning and any room controls together. Monitor placement and the room affect what you hear at your listening position, as Genelec explains in its monitor placement guidelines.

Mixer with an existing audio source

You want to connect the monitors to your computer or audio interface without choosing the wrong input, cable or package contents. Manufacturers list different connections and package contents, so check the specific version you want to buy.

What should you look for when buying?

Start by checking that you have space for two monitors and can connect them to your audio source. Then decide whether you mainly want to assess the effect of the room or the bass in the additional material.

What to consider What should you check? Who is this important for?
Stereo image Check that you can position two monitors symmetrically, at the same height and aimed at your listening position. For stereo, Genelec recommends a 60° angle between the monitors, with your listening position at the apex of an equilateral triangle. I want to assess the balance between the choir and additional material from my listening position. Around 33% of consumers give stereo assessment their highest priority.
Room and placement Measure the available space around your desk and walls before comparing settings. Yamaha lists ROOM CONTROL for the HS5, while JBL Professional lists Boundary EQ for the 305P MkII. These are adjustment options, not a substitute for suitable placement. If my desk or a nearby wall affects my listening position, I want to know which setup will work and what adjustments are possible. Around 27% of consumers prioritise the room and placement.
Bass response Compare frequency figures only when they use the same measurement point: ADAM Audio lists 45 Hz at −6 dB for the T5V; Yamaha lists 54 Hz at −10 dB and 74 Hz at −3 dB for the HS5. These figures cannot be compared directly and don't automatically tell you what you'll hear in your room. I want to know whether I can assess the bass in the additional material from my own listening position. Around 20% of consumers prioritise bass response.
Connections and whether a pair is included Compare your audio source's outputs with the inputs and required cables for the exact version. Yamaha lists XLR/TRS for the HS5 and sells that monitor individually; Hercules lists RCA, 3.5 mm aux and a cable between the speakers for the DJMonitor 42. If my interface only has certain outputs, I want to make sure the connections and offer contents are suitable for a stereo pair. Around 20% of consumers focus mainly on connections and what's included in the set.

Common buying mistakes

  • Mistaking a single monitor for a stereo pair

    Yamaha lists the HS5 as sold individually, while Hercules describes the DJMonitor 42 as a set of two speakers. A single HS5 is therefore not the same as a stereo pair.

    Check exactly how many speakers are included in the offer and whether you need two for your setup.

  • Comparing frequency limits measured at different points

    A frequency figure at −6 dB can't be compared directly with one at −10 dB or −3 dB. Your room and the monitors' placement also affect what you hear.

    Note the corresponding dB measurement point for each model and assess its bass response at your intended listening position.

  • Treating a room setting as a substitute for good placement

    Monitor settings don't automatically remove the effect of the room or speaker positioning. Neumann's optional MA 1 calibration also requires additional equipment and a suitable setup.

    First, make sure you can create a symmetrical listening setup. Then decide whether manual adjustment or measurement-based calibration is right for your situation.

Brands to consider

Yamaha

The HS series includes the HS5 active nearfield monitor, among other models, for analogue setups.

  • Yamaha lists XLR/TRS connections and ROOM CONTROL and HIGH TRIM settings for the HS5.
  • The HS5 is sold individually. Check the quantity if you need a stereo pair. Compare frequency figures only when they use the same dB measurement point.

ADAM Audio

ADAM Audio positions the T5V as a compact active nearfield monitor for smaller mixing spaces.

  • ADAM Audio lists a 5-inch woofer and a frequency response from 45 Hz at −6 dB.
  • A compact monitor or a claim about its listening zone doesn't make room acoustics and placement any less important.

JBL Professional

The 305P MkII is an active monitor with analogue XLR/TRS connections.

  • JBL lists Boundary EQ and HF Trim as settings for adapting to your environment.
  • JBL's claims about precision and the listening zone are manufacturer claims, not an independent comparison with other models.

Neumann

The KH 80 DSP is a compact monitor with room controls and an optional measurement-based setup.

  • Neumann lists the KH 80 DSP as compatible with MA 1.
  • The MA 1 setup requires, among other things, a measurement microphone, a suitable audio interface, a computer and network connections. Compatibility doesn't mean the measurement equipment is included.

Hercules

Hercules positions the DJMonitor 42 as a compact set of active speakers for DJ use.

  • Hercules lists RCA, a 3.5 mm aux input and a cable connecting the speakers.
  • The listed connections aren't XLR/TRS inputs. The available manufacturer information doesn't support a comparison of mixing accuracy for choir recordings.

Joybuy products

Related products coming soon.

Frequently asked questions

How should you position two monitors to assess a choir mix?

Start with two monitors at the same height, positioned symmetrically and aimed at your listening position. For stereo, Genelec recommends an angle of around 60° between the monitors, with your listening position at the apex of an equilateral triangle. Then listen from that spot to assess the balance between the choir and the additional material.

Can you connect the monitors to your existing audio source?

That depends on the outputs on your computer or audio interface and the inputs on the model you've chosen. Yamaha lists XLR/TRS for the HS5; Hercules lists RCA and 3.5 mm aux for the DJMonitor 42. Compare the connections and required cables for the exact version before you order.

What equipment do you need to calibrate using Neumann MA 1?

For an MA 1 setup with a KH 80 DSP, Neumann lists, among other things, an MA 1 measurement microphone, a computer, an audio interface with a microphone input and 48V phantom power, enough audio outputs and network connections. This is a separate measurement and installation process, not just a setting on the speaker.

Can you publish a choir recording and other audio material without permission?

Not without first checking the rights to the recording and the sources used. The Dutch government says that permission may be required to use copyright-protected music, and that a private copy must not be distributed or made available to the public. The Dutch government's business portal also notes that permission from performing artists may be required before someone else records, broadcasts or sells their performance.

What cooling-off period applies to an online purchase of monitors in the Netherlands?

For an online distance purchase from a business, you generally have a 14-day cooling-off period in the Netherlands, according to the Dutch government. This is separate from your rights if a product is faulty, damaged or not as described. Check the terms that apply to the seller and your purchase.