Who is this buying guide for?

Choir vocal mixer

You want to assess the balance between voices and their left-to-right positioning from a fixed listening position. Genelec recommends paying attention to symmetrical placement.

Mixer with limited workspace

You need to be able to position two speakers around your workspace without compromising symmetry. Compare their dimensions and positioning options; Genelec lists the dimensions of the 8320A.

Mixer with a challenging listening room

You want to know whether placement controls or measurement-based calibration will work for your setup, and what additional equipment you’ll need. Genelec and Neumann describe the requirements for their calibration systems.

What should you look for when buying?

What to consider What to look for when buying Who is this important to?
Choir balance and stereo image Choose a stereo pair that can be positioned symmetrically. Genelec recommends a 60° angle between the monitors, with the listener at the point of an equilateral triangle. If I want to assess the balance between choir voices and their stereo positions, I need a symmetrically positioned pair. Around 36% of consumers prioritise choir balance and stereo image.
Positioning and acoustics Measure the space available for both cabinets. According to Genelec, the 8320A measures 242 × 151 × 142 mm including the Iso-Pod; the listening room also affects what you hear. If my workspace is small or the room affects what I hear, I want to be able to position both speakers appropriately. Around 29% of consumers prioritise positioning and the effect of the room.
Assessing bass in a recording Only compare frequency limits when they use the same dB reference. Yamaha lists 54 Hz at −10 dB for the HS5; Genelec lists 55 Hz at −6 dB for the 8320A. These are not directly comparable measurements. If I want to assess lower voices and other low-frequency sounds, I look at both the measurement basis and how they sound in my listening position. Around 21% of consumers put bass assessment at the top of their list.
Connections and stereo pair Check the outputs on your audio source and how many speakers are included in the pack. Genelec lists one 8320A per pack; PreSonus describes the Eris Studio 5 as ‘Single’. For my stereo mix, I want to know whether the inputs are compatible with my equipment and whether I’ll have two speakers. Around 14% of consumers’ main buying concerns are connections and getting a complete stereo pair.

Common buying pitfalls

  • Mistaking one active monitor for a stereo pair

    Genelec lists one 8320A per pack, and PreSonus describes the Eris Studio 5 as ‘Single’; one speaker is not a stereo pair.

    Check how many speakers are included with each offer and whether the connections are compatible with your audio source.

  • Assuming a lower frequency limit is automatically better

    Yamaha lists 54 Hz at −10 dB for the HS5, while Genelec lists 55 Hz at −6 dB for the 8320A. The different measurement references mean they can’t be directly compared; the listening room also affects the sound.

    Compare the measurement basis and assess the bass in your intended listening position, rather than simply ranking the figures.

  • Expecting room correction to fix every room

    According to Genelec, calibrating the 8320A with GLM requires a separate kit. For MA 1, Neumann lists requirements including a measuring microphone, a suitable audio interface and a network connection; the listening room still affects the sound.

    Check which components you’ll need for your chosen system, and start by positioning the monitors sensibly and symmetrically.

Brands to compare

Genelec

Genelec describes the 8320A as a compact monitor with an XLR input and optional GLM room calibration.

  • According to Genelec, the 8320A is 151 mm wide.
  • The pack contains one monitor; a separately sold kit is required for GLM calibration.

Neumann

Neumann describes the KH 120 II as a nearfield monitor with DSP and support for MA 1 calibration.

  • Neumann lists analogue and S/PDIF connections for the KH 120 II.
  • MA 1 requires, among other things, a suitable measuring microphone and audio interface; check which network connections you’ll need.

ADAM Audio

According to ADAM Audio, the T series includes the T5V and T7V, with XLR and RCA connections.

  • The manufacturer lists tone controls on the T series.
  • The bass-reflex port is at the rear, so bear the available space in mind when positioning the monitor.

Yamaha

The HS5 is an active nearfield option with balanced XLR and jack inputs, plus controls for high frequencies and the effect of the room.

  • Yamaha describes the HS5’s connections and adjustment controls.
  • Yamaha’s HS5 specification page refers to the US version; check the version and delivery terms for the Netherlands.

PreSonus

According to PreSonus, the Eris Studio 5 (Single) has controls for adjusting the effect of the room and a front-facing bass-reflex port.

  • The manufacturer describes acoustic adjustment options for the monitor.
  • The product designation refers to one speaker; the information doesn’t tell you how a choir mix will sound in your room.

Joybuy products

Related products coming soon.

Frequently asked questions

How should you position two monitors before assessing the choir balance?

Position them symmetrically around your listening position. For stereo, Genelec recommends an equilateral triangle, with the listener at the point and both monitors facing the listening position; check how the setup works in your own room.

Can you use room correction without additional equipment?

That depends on the system you choose. Genelec states that calibrating the 8320A with GLM requires a separately sold kit; for MA 1, Neumann lists requirements including a measuring microphone, a suitable audio interface and network connections. Check which components you’ll need before choosing this option.

What warranty applies to a purchase by a consumer in the Netherlands?

When you buy as a consumer in the Netherlands, you’re entitled to a product that works as it should, but there is no fixed statutory warranty period. According to the Dutch government, the seller must provide a solution if a product is faulty; a manufacturer’s warranty is an additional benefit. Different terms may apply to business purchases.

Can you return a monitor bought online without giving a reason?

According to ACM ConsuWijzer, online consumer purchases generally come with a statutory cooling-off period of up to 14 days after delivery, with some exceptions. Check the terms that apply to your purchase; this is not a general returns period for business purchases.

What product safety rules apply to active monitors in the Netherlands?

For electrical and electronic equipment sold in the Netherlands, the Dutch government portal sets out European safety requirements and, where applicable, CE marking and an EU declaration of conformity. CE marking is not a quality mark and says nothing about a product’s overall quality or safety.