Who are these studio monitors for?

Choir recording mixer

You want to assess the choir voices, the balance between sections, and the recorded or added ambience. Sound On Sound described a choir recording made with a stereo pair and additional microphones for each section. This illustrates why both the voices and the stereo image may need attention.

Home mixer with limited space

You mix close to a desk and need to position two monitors so that the left and right speakers are set up in comparable positions. A compact model may fit your available space more easily, but it won’t change the room’s influence on the sound. Sound On Sound discusses short listening distances as a practical consideration when extensive acoustic treatment isn’t feasible.

Mixer with a fixed listening position

You can set up a stereo pair in a fixed position and want to check whether model-specific settings suit your room and workflow. Neumann mentions calibration via MA 1 for the KH 120 II; KRK describes listening modes and EQ settings for the ROKIT 5 Generation Five. Check what calibration involves for each model.

What should you look for when choosing?

First decide what you most need to assess carefully in your choir mix, then check whether the setup and full connection can work in your space.

What to consider What should you check? Who is this important for?
Vocal detail and balance Check the frequency response alongside its dB measurement limit, and listen to familiar vocal references from your intended listening position. If I prioritise intelligibility and the balance between choir sections, I want to know what my chosen monitor sounds like from my listening position. Around 33% of consumers give assessing vocals and section balance their highest priority.
Room and placement Measure whether two monitors will fit symmetrically, and check the placement and adjustment options of the exact model. When desk space is limited, I want to know first whether the left and right monitors can be positioned equally; settings won’t remove the room’s influence. Around 27% of consumers prioritise practical placement and the listening space.
Stereo image and spaciousness Check whether you can position, angle and connect both speakers at the same height and distance. If I want to assess the position of the voices and the spaciousness of a choir recording, I need a suitable stereo setup. For around 20% of consumers, the stereo image is the main priority.
Complete setup and connections Check how many monitors are included and whether the connections suit your audio equipment; a passive system requires a suitable power amplifier. I want to know in advance whether the offer will give me two connected monitors and what connections I’ll need. A complete stereo setup and its connections are the top priority for around 20% of consumers.

Common buying mistakes

  • Comparing low-frequency limits without checking the measurement limit

    A figure at −10 dB isn’t directly comparable with one at −6 dB. For example, Yamaha lists the HS5 at 54 Hz at −10 dB, while Genelec gives the 8030C as 47 Hz at −6 dB.

    Compare the measurement conditions and assess the bass from the listening position where you plan to mix.

  • Assuming one active monitor is a complete stereo pair

    Yamaha lists the HS5 individually, and Genelec describes the 8030C as a single monitor. One speaker won’t automatically give you a complete stereo setup.

    Check how many monitors are included in the specific offer and what connections you’ll need.

  • Thinking a larger monitor or calibration software will solve every room problem

    Your listening position, speaker placement and reflections all affect what you hear, even when a monitor offers room calibration settings.

    First decide where you can position two monitors, then check whether the size and calibration options of your chosen model suit that setup.

Brands worth comparing

Yamaha

The HS series includes active nearfield monitors in a range of sizes. The HS5 is a compact option to consider if space for your setup is limited.

  • Yamaha lists XLR and TRS inputs, ROOM CONTROL and HIGH TRIM, and a frequency range starting at 54 Hz at −10 dB for the HS5.
  • The HS5 is sold individually. Its stated frequency limit alone won’t tell you how the monitor will sound in your room.

Genelec

The active 8030C is a single monitor to consider if you want to compare compact dimensions and model-specific room compensation.

  • Genelec lists dimensions of 299 × 189 × 178 mm including the Iso-Pod, and a range starting at 47 Hz at −6 dB.
  • The box contains one monitor. The manufacturer’s claims about detail and mixes that translate well aren’t independent confirmation of the results you’ll get in your room.

ADAM Audio

The active T7V is a larger nearfield option to compare if you have enough room for the setup.

  • ADAM Audio lists a 7-inch woofer, a frequency limit of 39 Hz at −6 dB and a rear-facing bass-reflex port.
  • The stated frequency limit won’t tell you how the bass will sound from your listening position; placement and room acoustics still make a difference.

Neumann

The KH 120 II is an active nearfield monitor to consider if you have a fixed listening position and want model-specific DSP calibration.

  • Neumann recommends a listening distance of 1–2 metres and calibration using the MA 1 system.
  • Check which steps and additional components the calibration method requires for your setup.

KRK

The ROKIT 5 Generation Five is a single active monitor to consider if you want to explore different model-specific listening and EQ settings.

  • KRK lists Mix, Focus and Create modes, as well as 25 combinations of boundary and EQ settings.
  • Settings aren’t a substitute for suitable placement; check whether the model’s options work for your listening space.

Joybuy products

Related products coming soon.

Frequently asked questions

How should you position two monitors to assess a choir recording in stereo?

Start with a fixed listening position and place the left and right monitors as symmetrically as possible, at the same height and angled towards that position. Genelec describes an equilateral triangle with a 60° angle between the monitors as the ideal stereo setup; room reflections will still affect what you hear.

Do I need automatic room correction?

Not all monitors offer the same calibration options, and you should always start with suitable placement. Neumann mentions calibration via MA 1 for the KH 120 II; KRK describes listening modes and EQ settings for the ROKIT 5 Generation Five. Check the requirements for the exact model.

What should I check when putting together a complete stereo setup?

Check how many monitors are included in the specific offer and whether the connections suit your audio equipment. Yamaha states that the HS5 is sold individually, while Genelec says the 8030C box contains one monitor. Passive monitors also require a suitable separate power amplifier.

What consumer rights apply when buying online in the Netherlands?

According to the Dutch government, you’re entitled to a product that works properly; there’s no fixed statutory period for the legal guarantee in the Netherlands. A manufacturer’s guarantee is in addition to your statutory rights. For distance purchases from a business, you’re usually entitled to a 14-day cooling-off period, with some exceptions. If a product is faulty, contact the seller.

Which electrical safety rule may apply to an active studio monitor?

According to EUR-Lex, the European Low Voltage Directive applies to electrical equipment designed for 50–1,000 V AC or 75–1,500 V DC. Equipment within this scope must meet certain requirements before it can be placed on the EU market. Check the power specifications and product information for the specific model; this information about the directive does not confirm that a particular offer complies with it.