Start with a stereo pair that you can position symmetrically around your listening spot without the screens blocking the listening lines. Then consider the size and specifications. A compact model may be easier to fit, while a larger cabinet takes up more space and may have different quoted low-frequency limits. Also check that the inputs match your audio interface and whether the package contains one speaker or a pair.
Who is this choice relevant to?
Choir recording editor
You assess vocal sections, stereo positioning and the sense of space in a choir recording. That makes the layout around your listening spot just as important as the speaker specifications. Genelec recommends symmetrical stereo positioning; iZotope also describes the acoustics of the recording room as an important part of listening to classical music.
Editor using two screens
You want to be able to place a speaker on either side without blocking the listening lines. Measure the space available around the screens and consider the cabinet width and where any stands would go.
Editor with an existing audio interface
You want to connect the speakers to the outputs you already use and know whether you are buying one unit or a stereo pair. Check the connections and the contents of the package for the exact model.
Which buying considerations matter?
Start with your listening position and the space around your screens. Then compare the low-frequency response, connections and package contents of models that fit your setup.
| Consideration |
What to look for when buying |
Who this matters to |
| Balance and stereo image |
Check whether two speakers can be placed at the same height and distance, and angled towards your listening position. For stereo, Genelec recommends a 60° angle, with the listening position at the point of an equilateral triangle. |
If I want to assess vocal sections, stereo positioning and the sense of space in a choir recording, I prioritise a stable listening position. Around 36% of consumers focus on this stereo assessment. |
| Space beside two screens |
Measure the available width and check whether both speakers will fit symmetrically. Keep the listening line clear of objects; Kali advises against placing anything between the listener and the speaker. |
When my screens leave little room, I want to know whether two speakers will fit beside the desk or screens. Around 29% of consumers prioritise this positioning. |
| Low-frequency response and room |
Only compare frequency limits when they use the same dB measurement basis. Also consider whether you can adjust the positioning; placement controls are no substitute for a suitable setup. |
If I want to assess the low frequencies in a choir recording, I weigh the quoted response against the cabinet size and my room. Around 21% of consumers focus on this trade-off. |
| Connections and stereo pair |
Compare your interface outputs with the inputs on the exact model and check what is included in the package. Yamaha lists the HS5 as a single unit; Genelec also lists one 8020D per package. |
When I want to use my existing interface and need two speakers, I check both the connections and the number of units included. Around 14% of consumers prioritise this combination. |
Common buying mistakes
-
Assuming the package contains a stereo pair
According to their manufacturers, the Genelec 8020D and Yamaha HS5 are packaged individually. One speaker is not enough for a stereo pair.
Before buying, check how many speakers are included and how many you need for the left and right channels.
For stereo, you may need a second unit as well as suitable signal cables for both speakers.
-
Positioning your screens before deciding where to listen
An asymmetrical setup, or objects between the listener and the speakers, can affect how you assess the stereo image.
First map out your listening position and where both speakers will go. Then measure where the screens and any stands can be placed.
Your chosen setup may require extra desk space or suitable speaker stands.
-
Comparing low-frequency limits without checking the dB measurement basis
A frequency limit at −3 dB cannot be directly compared with one at −6 dB or −10 dB. The Yamaha HS5 and Genelec 8020D, for example, use different dB measurement bases for their quoted responses.
When comparing models, note the full frequency specification and its associated dB value. Then consider how the speakers will be positioned in your own room.
Relevant brands for this setup
Genelec
The 8020D and 8030C offer different cabinet sizes for a compact or more spacious listening setup.
- Genelec quotes a width of 148 mm and a frequency limit of 56 Hz at −6 dB for the 8020D. For the 8030C, these figures are 189 mm and 47 Hz at −6 dB.
- These are manufacturer specifications, not an independent assessment for editing choir recordings. Both models are packaged individually.
Yamaha
The active HS5 is a nearfield model with XLR and TRS inputs, plus ROOM CONTROL.
- Yamaha quotes 74 Hz at −3 dB and 54 Hz at −10 dB.
- These two measurement bases are not directly comparable with a frequency limit at −6 dB. The HS5 is packaged individually.
ADAM Audio
The active T5V is a 5-inch nearfield model that ADAM Audio positions for small control rooms.
- ADAM Audio specifies a rear-facing bass reflex port and a frequency limit of 45 Hz at −6 dB.
- The manufacturer names the T10S as an option for extending the low end; that does not determine whether the combination will suit your room.
JBL Professional
The active 305P MkII has Boundary EQ and XLR and TRS inputs.
- JBL says Boundary EQ can reduce bass boost caused by positioning a speaker on a desk or close to a wall.
- This manufacturer claim does not guarantee a neutral response in your room and is no substitute for suitable positioning.
Kali Audio
The LP-6 V2 is part of the active LP series. Kali also publishes a guide to positioning speakers in a workspace.
- Kali’s positioning guide recommends, among other things, placing the tweeters at ear height and angling the speakers towards the listener.
- Kali’s claims about accuracy and mixing results are manufacturer claims, not an independent comparison with other brands.
Products at Joybuy
Related products will be available soon.
Frequently asked questions
How should you position speakers when working with two screens?
Start with your listening position and place the speakers to the left and right, at the same height and as symmetrically as possible. For stereo, Genelec recommends a 60° angle between the speakers, with the listener at the point of an equilateral triangle. Kali advises against placing objects between the listener and the speaker; then adjust the screen positions as your workspace allows.
Do you need a subwoofer to edit choir recordings?
Not necessarily. First consider which lower frequencies you need to check and how the speakers are positioned in your room. ADAM Audio lists the T10S as an option for extending the T5V, but that does not make a subwoofer essential for editing choir recordings.
Do active studio monitors need a separate amplifier?
No. An active monitor has a built-in amplifier. However, check that the signal inputs and power connections suit your setup. A passive speaker, on the other hand, needs a suitable external amplifier.
What are your rights when buying online or if a product is faulty?
When you buy from a business at a distance, you are often entitled to a 14-day cooling-off period, subject to legal exceptions. The Dutch Government explains these rights. If a product is faulty, contact the seller. An additional guarantee does not replace your statutory rights.
What safety rules apply to a mains-powered active speaker?
Electrical equipment designed for 50 to 1,000 volts of alternating current and covered by the EU Low Voltage Directive must meet safety and conformity requirements; the Dutch Government explains CE marking. Check the power supply requirements and relevant conformity information for the exact model. A CE mark says nothing about sound quality.