Who are studio monitors suitable for?

Office worker who needs to listen quietly

If colleagues are concentrating, first check whether speaker playback is suitable for your workplace. Arboportaal notes that disruptive noise can also pose a risk at work; headphones may be a more appropriate way to listen.

Person transferring tapes at a small desk

You want to check both cassette channels, but you’ll need to find room for two speakers. Genelec recommends pointing monitors towards your listening position, so measure the available space in advance and consider how you can position them.

Person checking the signal path during a transfer

You want to tell recording problems apart from what you hear during playback. The Audacity manual recommends using a suitable line input for a line-level signal. You should also work out which output you’ll use to monitor the recorded audio.

What should you look for when choosing?

Headphones

Choose this option when: audible playback would disturb colleagues or isn’t allowed.

The trade-off: you can listen privately, but headphones won’t replace checking through two speakers if you need to do that too.

Compact active stereo speakers

Choose this option when: you’re sometimes allowed to listen quietly through speakers, have limited desk space and want to switch between speakers and headphones.

The trade-off: even a compact set can be heard by colleagues. Check the connections and exactly what’s included in the listing.

Two separate nearfield monitors

Choose this option when: you can position two speakers symmetrically and have suitable outputs.

The trade-off: a single monitor isn’t a stereo set. Allow for two units and the right cables.

What to consider What should you check? Who is this important for?
Listening quietly Check whether speakers are allowed in your office, which output feeds a pair of headphones, and whether a headphone socket, if there is one, switches the speakers off. If I want to check a cassette without disturbing colleagues, I need to know whether I can listen privately. Around 36% of consumers say listening quietly is their main buying concern.
Connections Check the deck output, recording input, playback output and monitor inputs separately. Only choose a cable once you know which devices you’ll be connecting. If I want to connect my deck to my recording equipment, I need to avoid choosing the wrong input or adapter. Around 29% of consumers give connection compatibility their top priority.
Space for stereo Measure the space available for both speakers and check whether the box contains one monitor or a pair. If I want to check the left and right channels on a small desk, I need room for two speakers without making the workspace impractical. Around 21% of consumers say fitting stereo speakers into a limited space is their main concern.
Checking for faults Check the recording level and both channels before assessing playback through the monitors. Note what any room or tone controls change. If I want to find out whether distortion occurred during the transfer, I need to distinguish recording problems from the playback sound. Around 14% of consumers put checking for faults first.

Common buying mistakes

  • Mistaking a single monitor for a stereo set

    With one speaker, you can’t check the two cassette channels as a stereo pair through speakers. Genelec lists one 8010A per box, while Yamaha describes the HS3 as a pair.

    Check what’s included in the exact listing and whether your setup needs one or two units.

    You may need a second speaker if you buy a single monitor. Remember to allow for suitable cables too.

  • Mistaking a monitor input for a recording input

    A speaker plays audio. To record a line-level signal, Audacity recommends using a suitable line input; a monitor input isn’t a substitute.

    Before you buy, map out the route from the cassette output to the recording input, then on to your headphones or monitors.

    You may need a suitable audio interface or cable, as well as time to set up the signal path.

  • Assuming nearfield monitors won’t disturb colleagues

    Listening from close range doesn’t mean the sound is isolated. Arboportaal points out that disruptive noise can also be a concern in the workplace.

    Choose private listening if audible playback isn’t suitable, and use speakers only at agreed times.

  • Treating specifications as directly comparable listening measurements

    A quoted frequency range only makes sense alongside the conditions under which it was measured. Your room and speaker placement also affect what you hear from your listening position.

    Read the measurement conditions and first check that the size, connections and placement suit your situation.

Brands to compare

PreSonus

The Eris 3.5 2nd Gen is a compact active set for analogue sources, with the option to switch to headphones.

  • PreSonus lists a pair of monitors, RCA, 3.5 mm and balanced 6.35 mm TRS inputs, plus a headphone output.
  • Descriptions of the sound are manufacturer claims. Check the exact version and the product documentation that applies to the listing.

Yamaha

The HS3 is a compact stereo set with several analogue inputs and controls for adjusting placement.

  • Yamaha Europe lists the monitors as a pair, with combo XLR/TRS, RCA and stereo mini-jack inputs, plus ROOM CONTROL and HIGH TRIM controls.
  • Yamaha’s description of the sound is a manufacturer claim. The settings and your actual desk setup will still affect what you hear.

Edifier

The MR4 is a compact active set with RCA, AUX and balanced TRS inputs, a headphone output and two listening modes.

  • Edifier describes the connections and listening modes. The manufacturer has published an EU declaration of conformity for model EDF100024(MR4).
  • The flat monitor mode is a manufacturer claim, not an independent measurement. Check that the unit on offer is the same model and that its version and documentation match the listing.

Genelec

The 8010A is a separate compact active nearfield monitor for a setup with suitable analogue XLR outputs.

  • Genelec lists dimensions of 195 × 121 × 115 mm including the Iso-Pod, and one XLR input.
  • The box contains one speaker; you’ll need two units for stereo. Claims about neutrality come from the manufacturer.

ADAM Audio

The T5V is a single five-inch nearfield monitor for anyone with room for two separate cabinets and a suitable analogue connection.

  • ADAM Audio lists a frequency range of 45 Hz–25 kHz at −6 dB and a rear-firing bass reflex port.
  • This range can’t be compared directly with specifications from other brands unless they use the same measurement basis. Allow space behind the monitor when positioning it; performance descriptions are manufacturer claims.

Products related to this topic

Related products coming soon.

Frequently asked questions

Can I connect the line out on my cassette deck directly to my computer’s microphone input?

No. Use a suitable line input on your computer or an audio interface for a line-level signal. Audacity advises against using a microphone input for this; also decide separately how you’ll monitor the recorded signal.

How should I position monitors to check the left and right channels?

Position two speakers as symmetrically as possible in relation to your listening position, at a similar height and distance, and point them towards you. Genelec’s positioning advice describes the listening position as the tip of an equilateral triangle; your office space may limit your options.

If I hear distortion, should I buy different speakers straight away?

No. First check the connection and recording level with a test recording. Distortion may have occurred earlier in the transfer process; the Audacity manual includes recording levels and cassette-head maintenance in its transfer workflow.

Does a two-year manufacturer’s warranty mark the limit of my rights in the Netherlands?

No. When you buy as a consumer, you’re also covered by the statutory guarantee that a product will meet the reasonable expectations you can have of it. According to ACM ConsuWijzer, the seller is responsible if a product used normally turns out to be faulty too soon; there’s no fixed statutory lifespan for these monitors.

Which product safety rules should I check for an electric monitor?

Check that the specific listing complies with the applicable EU product rules, including the required CE marking where those rules apply to the equipment. A manufacturer’s claim or document for a model doesn’t automatically confirm that a specific unit on offer is the right version and has the correct documentation.