Who are these monitors for?

You’re digitising cassette tapes

When making a stereo transfer, you’ll want to listen to the recording and distinguish the recording input from the outputs connected to the monitors. The Audacity guide explains how to connect a cassette deck to a computer.

You have a small desk

You want to know whether two speakers will fit alongside your cassette equipment and whether you can angle them towards your listening position. Genelec recommends placing the left and right monitors symmetrically.

You want to assess the recording carefully

You’re paying attention to stereo imaging and the effect of the room, as both influence what you hear from your listening position. Genelec provides guidance on setting up studio monitors.

What should you look for when choosing?

Start with the signal path: work out how you’ll record the cassette and which output will drive the monitors. Then measure the space available for two speakers and check what’s included with the exact version.

What to consider What to check before buying Who is this important for?
Recording and playback connections Check the stereo outputs on your computer or interface, the inputs on both monitors and the cables you’ll need. I want a working stereo recording and playback chain so I can listen to the transfer without confusing the recording input with the monitor output. That’s why around 33% of consumers prioritise the right signal path.
Space for two monitors Measure the width and depth available for both speakers, cables and stands. Also check whether the offer includes one speaker or a pair. With limited desk space, I want to know in advance whether two speakers will fit and can be positioned properly. Around 27% of consumers put space for a stereo pair first.
Sound at the listening position Compare the placement options and any controls. Only compare frequency limits when they use the same measurement method. I want to assess the transferred recording from a consistent stereo listening position without assuming that placement controls will fix a difficult setup. Around 27% of consumers prioritise useful sound at the listening position.
What you need for the setup Check which cables are included, whether you’re buying one speaker or a pair, and whether you already have a suitable recording interface. I want to know what else I’ll need besides the monitors, so the complete recording and playback chain works as it should. Around 13% of consumers prioritise having a complete setup.

Common buying mistakes

  • Mistaking monitors for a cassette recording device

    Monitors play back the audio signal, but they don’t replace the recording input for your cassette deck. The Audacity guide describes connecting a cassette deck to a computer as part of the recording chain.

    Before you buy, map out the route from the deck output to the line input for recording, and from the playback output to both monitors.

  • Mistaking a single monitor for a stereo pair

    The Genelec 8010A is specified as a single monitor, while some other models are sold as a pair. For stereo monitoring, you’ll need two speakers and suitable connections.

    Check the sales unit and what’s included in the exact offer before ordering.

  • Comparing frequency limits directly

    A quoted lower frequency limit isn’t necessarily comparable with another if the measurement method differs.

    Only compare frequency ranges that use the same measurement method, and consider how the monitors will sit on your own desk.

Brands to consider

ADAM Audio

The D3V is an active desktop stereo system with USB-C for computer playback and analogue TRS inputs.

  • According to ADAM Audio, the D3V has placement switches and comes with stands.
  • ADAM Audio specifies internal processing at 48 kHz/16 bit in USB mode. This is a model specification and doesn’t indicate the recording quality provided by a separate interface.

Yamaha

According to Yamaha, the HS3 is a compact active stereo pair with analogue combo, RCA and stereo mini-jack inputs.

  • Yamaha lists room control and high-trim switches.
  • The cabinet depth differs between the left and right speakers, so measure both available spaces on your desk.

PreSonus

The Eris 3.5 2nd Gen is an active pair with analogue TRS, RCA and stereo mini-jack inputs, plus a headphone output.

  • According to PreSonus, a speaker cable and audio cables are included.
  • PreSonus says that energy-saving mode activates after 40 minutes. Check that you’re looking at the 2nd Gen, not the older Eris E3.5 or the BT version.

IK Multimedia

The iLoud Micro Monitor is a small active stereo system with wired RCA and stereo mini-jack inputs.

  • IK Multimedia specifies a width of 90 mm per cabinet and two speakers per system.
  • IK Multimedia states that Bluetooth has higher system latency than an analogue connection. For monitoring a recording as you make it, the wired input is the more suitable choice.

Genelec

The 8010A is a single active monitor with an analogue XLR input.

  • Genelec specifies dimensions of 195 × 121 × 115 mm including the Iso-Pod.
  • Check whether the offer includes two units; one 8010A is not a stereo pair.

Joybuy products

Related products will be available soon.

Frequently asked questions

Can I connect a cassette deck directly to USB-C monitors to record?

No, not through the USB-C playback connection on the ADAM Audio D3V: ADAM Audio describes this connection as being for playback from a computer or mobile device. Record from the deck through a suitable line input on your computer or audio interface, then use the monitors to listen to the playback signal.

How should I position two monitors on a small desk?

Angle both monitors symmetrically towards your listening position. As a starting point, Genelec recommends an equilateral listening triangle with a 60° angle. First, check that this arrangement fits alongside your screen and cassette deck.

What extra equipment should I check for the setup?

Check that you have a suitable line input for recording, whether the monitors are sold as a pair, and which connection and speaker cables are included with the exact version. This will help you check that the recording and playback chain is complete.

What can I do if a monitor develops a fault after purchase?

According to the Dutch government, you’re entitled to a product that works properly. If the seller is responsible for the fault, you may be entitled to a free repair, replacement or refund. The Netherlands has no fixed statutory warranty period that applies to all products.

Which product safety rules apply when buying in the Netherlands?

An active electrical device must comply with the applicable EU safety rules and carry the corresponding CE marking where those rules require it. The Dutch government’s Ondernemersplein and Rijksoverheid explain these general requirements. Check the safety information and version details for the specific product.