Digitising cassettes at a crowded desk
You work with two screens and have little room for a stereo pair. Genelec recommends angling monitors towards your listening position, so check that both speakers can be positioned suitably.
Choose a stereo pair that you can position symmetrically beside your two screens and angle towards your listening position. A compact desktop set may suit a limited workspace; two separate nearfield monitors are an alternative if you have enough room and the right analogue outputs. Check the recording chain separately: a USB input on a monitor won’t digitise your cassette.
You work with two screens and have little room for a stereo pair. Genelec recommends angling monitors towards your listening position, so check that both speakers can be positioned suitably.
You want to record the cassette using your existing equipment and check that the outputs, speaker inputs and cables are compatible. The Audacity manual explains how to record from an external device with an audio output; the connections listed in the monitor specifications can help you choose the right cable route.
You want to check for differences between channels or recording problems during and after digitising, without assuming that a stated speaker specification reflects what you’ll hear at your listening position. Audacity warns that recording a signal too hot can cause clipping, which can’t be undone afterwards.
The percentages relate to consumers looking for studio monitors to check a cassette transfer alongside two screens; each consumer’s main reason for buying is highlighted.
| What to consider | What should you check? | Who is this most important to? |
|---|---|---|
| Positioning beside your screens | Measure whether you can place two speakers on either side at a similar distance from your listening position. Angle them towards it, as Genelec recommends. | When I use two screens on a crowded desk, I want to fit in a stereo pair without losing sight of my listening position. Around 31% of consumers cite symmetrical positioning as their main reason for buying. |
| Recording and playback chain | Check the route from cassette deck to recording device, and from the playback output to both monitors. USB-C on the ADAM Audio D3V is for computer playback, not cassette recording. | I want to connect my cassette deck, recording device, and left and right speakers correctly. For around 31% of consumers, the right signal path is the deciding factor when buying. |
| Checking the recording | Watch the recording meter and listen back to the recording. Audacity warns that recording a signal too hot can cause clipping; only compare frequency limits if they use the same dB reference. | If I want to spot recording errors, I check both the meter and what I can hear from my listening position. Checking recording details is the main reason for buying for around 23% of consumers. |
| Complete stereo pair | Check the packaging for the exact version: Yamaha lists the standard HS5 as a single speaker; according to IK Multimedia, the original iLoud Micro Monitor comes as a pair. | I want to know in advance whether my purchase includes two speakers and therefore forms a stereo pair. For around 15% of consumers, buying a complete stereo setup is the main reason for choosing a product. |
Recording the cassette and listening to the audio through monitors are separate steps. A speaker input doesn’t replace the recording input you need to capture the cassette.
Check the complete signal path: from the cassette deck to the recording device and recording file, then from the playback output to both speakers.
The standard Yamaha HS5 is packaged individually, while the original IK Multimedia iLoud Micro Monitor is listed as a pair.
Check the contents of the exact version before deciding whether you’ll have enough speakers for stereo.
Manufacturers may state frequency limits using different dB references. Positioning also affects what you hear from your listening position.
Compare frequency specifications only when you know their measurement reference, and check that you can position the monitors suitably beside your screens.
The D3V is a compact active desktop set with USB-C and analogue TRS connections.
The LP-UNF is a desktop stereo system with digital and analogue inputs.
The original iLoud Micro Monitor is a compact, analogue stereo pair.
The HS5 is a single active nearfield monitor for an analogue setup.
According to PreSonus, the Eris 3.5 2nd Gen is a compact analogue pair.
No, not through that speaker input. ADAM describes USB-C on the D3V as a connection for computer playback; to capture a cassette, you need a suitable recording input and a separate recording step.
Play a loud section and check the recording meter before making the final recording. According to the Audacity manual, recording a signal too hot can cause clipping, which can’t be undone afterwards.
Yes, if you buy the standard HS5, which is sold individually. Yamaha lists one speaker per package; check again how many speakers are included if you choose a different version.
When you buy as a consumer, you’re entitled to a product that meets your expectations, and the retailer is your point of contact for a solution. According to the Dutch government, there’s no fixed statutory guarantee period in the Netherlands; what you can expect depends, among other things, on the product and how it’s used.
For eligible distance sales, you’ll often have a 14-day cooling-off period, but there are exceptions. The rules mentioned for distance sales don’t apply to purchases from a private seller; check the terms of the specific purchase.
No. Dutch government information describes CE as a conformity marking for applicable European product requirements, not as a quality mark or an assessment of sound.