Who is this choice relevant to?

Bass guitar editor looking to assess the low end

If you edit recordings with important low frequencies, you can compare frequency limits, but you should also check the stated dB tolerance and the acoustics of your listening space. ADAM Audio and Genelec publish measurement tolerances for the models listed.

Mixer with a workspace beside a window

A stereo pair needs to suit the space available and the reflections on the left and right. Genelec recommends having similar reflections on both sides for a stereo image; Yamaha warns against direct sunlight in the HS manual.

Creator with a small desk

If space is limited, you’ll want to know in advance whether you can position a pair symmetrically and which connections and extra calibration components you’ll need. Yamaha lists XLR and TRS inputs for the HS series; Genelec says that GLM calibration for the 8330A requires a controller or kit, available separately.

What should you look for when choosing?

Start with the position and listening conditions, then consider which bass range, connections and additional components suit your recording work.

What to consider What should you check? Who is this important for?
Bass response for bass guitar Compare the frequency limit together with its dB tolerance, and assess the bass response in your intended listening position. For example, the stated limits for ADAM Audio and Genelec are both at −6 dB, but that alone doesn’t tell you how the monitor will sound in your room. If I’m editing bass guitar parts, I want to know whether the low notes remain usable in my listening position, not just what the datasheet says. That’s why around 36% of consumers put usable bass response first.
Stereo positioning and reflections Check whether both monitors can be positioned symmetrically and angled towards your listening position. Genelec recommends similar reflections on the left and right for a consistent stereo image. If I’m mixing beside a window, I want balanced stereo positioning without noticeably different reflections on either side. Around 29% of consumers put acoustic symmetry first.
Sunlight and clearance Consider direct sunlight during your working hours, the space available and adequate ventilation. Yamaha warns against direct sunlight and blocked ventilation in the HS manual; check the instructions for other models. If direct sunlight can reach my desk, I want to position my monitors out of the sun while still being able to use them as a pair. Around 21% of consumers put protection from sunlight and practical positioning first.
Connections and complete setup Check that the inputs match your audio interface, whether the box contains one monitor or a pair, and which components you’ll need separately for the calibration you want. Yamaha lists XLR and TRS for the HS series; Genelec says GLM hardware for the 8330A is available separately. If I want to put together a working setup, I want to know in advance which connections and extra components I’ll need. Around 14% of consumers put connections and the requirements of the complete setup first.

Common pitfalls when choosing

  • Comparing frequency limits with different measurement tolerances

    A stated frequency range without the same dB tolerance isn’t directly comparable with a figure that includes one. The room and listening position also affect what you hear.

    Read the full measurement specification and assess the bass response where you’ll be working.

  • Choosing based only on available desk space

    An asymmetrical setup can produce different reflections on the left and right. Yamaha’s HS manual also warns against direct sunlight as a source of heat.

    Before choosing a size, check whether you can position a stereo pair symmetrically and whether sunlight will reach the monitors during your working hours.

  • Assuming one monitor or a calibration feature gives you a complete setup

    Yamaha lists one monitor per box for the HS models mentioned. According to Genelec, GLM calibration for the Genelec 8330A requires a separate controller or kit.

    Check what’s included in the box and which components you’ll need before choosing your setup.

    A stereo pair may require a second monitor. If you want to use GLM calibration with the Genelec 8330A, you’ll also need separate calibration hardware.

Brands to compare

ADAM Audio

The T7V is an active 7-inch nearfield monitor to consider when weighing up size, positioning and stated bass response.

  • ADAM Audio states that the T7V reaches down to 39 Hz at −6 dB.
  • The bass reflex port is at the rear; the stated limit doesn’t guarantee a flat bass response in your listening position. ADAM Audio lists the T10S as an additional option for a lower frequency range.

Yamaha

The HS series includes active nearfield models in various sizes, with XLR and TRS inputs and adjustment controls.

  • Yamaha Netherlands lists a lower limit of 74 Hz for the HS5 and 55 Hz for the HS7, both at −3 dB.
  • This means the models mentioned aren’t directly comparable for assessing bass response. Yamaha lists them as sold individually and warns against direct sunlight and blocked ventilation in the manual.

PreSonus

The Eris Studio 8 is an active 8-inch monitor for anyone considering a model with a front-facing bass reflex port and acoustic adjustment controls.

  • PreSonus states a frequency range of 35 Hz to 20 kHz.
  • That frequency range isn’t accompanied by a comparable dB tolerance. The listed retail packaging contains one monitor, so check how many you’ll need for a stereo pair.

Genelec

The compact 8330A SAM is designed for workspaces where positioning and optional calibration are important considerations.

  • Genelec lists 45 Hz at −6 dB and dimensions of 299 × 189 × 178 mm, including the Iso-Pod.
  • According to Genelec, GLM calibration requires a controller or kit, available separately. Calibration won’t necessarily solve every acoustic issue.

KRK

The ROKIT 7 Generation Five has adjustable listening modes for anyone who switches between critical listening and other types of listening.

  • KRK lists Mix, Focus and Create modes, plus 25 combinations of positioning and EQ settings.
  • These settings don’t prove that the monitor will solve issues with window reflections or bass response in every workspace.

Joybuy products

Related products coming soon.

Frequently asked questions

Should you position the monitors right next to the window?

Not necessarily. First, find a symmetrical setup with both speakers angled towards your listening position, and check how nearby surfaces reflect sound. If there’s direct sunlight, follow the heat and ventilation guidance for your chosen model; Yamaha specifically warns about this in the HS manual.

Do you need a subwoofer to edit bass guitar tracks?

Not for every recording or workspace. Consider a subwoofer if you can’t adequately assess relevant low frequencies with your main monitors. Genelec points out that positioning a subwoofer against a wall or in a corner can increase its level, but won’t necessarily give you the flattest frequency response. So take care when positioning it and setting the crossover and phase.

How do you connect active studio monitors?

Compare the outputs on your audio interface with the inputs on the exact monitor model. Yamaha lists XLR and TRS inputs for the HS series; check which connections other models have.

Can you return monitors bought online?

For distance purchases from a business, the Dutch government says you’ll usually have a 14-day cooling-off period. Check which exceptions apply and what information the seller provides about the purchase.

Does a two-year legal guarantee always apply in the Netherlands?

No. According to the Dutch government, there’s no fixed statutory guarantee period in the Netherlands. If a product is faulty, the seller must generally provide a solution; any manufacturer’s guarantee is separate.