Who are these monitors for?

Vocal mixer working with stereo layers

You’re mainly assessing how backing vocals support the lead and where they sit in the stereo image. For that, you need a pair of monitors you can position symmetrically. Genelec explains why similar reflections on the left and right are important for an accurate stereo image; iZotope discusses the role of backing vocals in a mix.

Mixer with a crowded desk

You share your workspace with a screen or other office equipment. The dimensions of both cabinets and the room to position them evenly help determine what will work in practice. Genelec lists the dimensions of the 8010A.

Producer who also checks the full mix

You want to make decisions about the bass and connections as well as the vocals. So compare the inputs and stated frequency limits of each model, and bear in mind what your room and listening position allow you to hear. Yamaha and ADAM Audio, for example, publish frequency limits with different measurement tolerances.

What should you look for?

What to consider What should you check? Who is this important for?
Stereo image of the vocals Can you position both monitors at the same height and distance, aimed at your listening position? If I want to assess the positioning of backing vocals, the pair needs to be set up symmetrically. Around 33% of consumers prioritise balance and stereo positioning.
Space on your desk and in your room Measure the space for two cabinets and check whether a symmetrical setup is possible. If my desk is crowded, I want to know whether two monitors will fit beside the screen and can be positioned evenly. Around 27% of consumers prioritise space and the effect of the room.
Connections and stereo pair Compare your computer or audio interface outputs with the inputs on the exact model; also check whether the package contains one monitor or a pair. If I want to connect a stereo pair to my existing equipment, I need to check both the inputs and what’s included in the package. Around 20% of consumers prioritise connections and a complete pair.
Bass response Compare frequency limits only alongside their dB tolerance, and assess the bass from your own listening position. If I want to assess the bass in the full mix as well as the vocals, I can’t rely on the lowest frequency figure alone. Around 20% of consumers make checking the bass their top priority.

Common mistakes

  • Using a frequency limit as a complete comparison of bass response

    Manufacturers may state frequency limits at different dB tolerances. Yamaha lists the HS5 at 54 Hz at −10 dB and 74 Hz at −3 dB; ADAM Audio lists the T5V at 45 Hz at −6 dB. These limits aren’t directly comparable, and positioning affects what you hear from your listening position.

    Compare the measurement tolerance alongside the frequency limit, and assess the bass where you’ll be mixing.

  • Mistaking a single monitor for a stereo pair

    Yamaha states that the HS5 is packaged individually, but you’ll need two monitors for this stereo setup.

    Check how many cabinets are included in the offer, and allow for the space and connection needed for a second monitor.

  • Thinking room controls can replace a good setup

    Placement controls won’t automatically correct uneven distances or reflections. Genelec stresses the importance of similar reflections on the left and right; JBL describes Boundary EQ as a feature to address potential bass boost when monitors are placed on a desk or close to a wall.

    First, plan the most symmetrical setup you can, then use any available controls to adjust the response.

Brands to consider

Yamaha

The HS5 is an active nearfield monitor for anyone who can accommodate two separate cabinets with XLR or TRS connections.

  • Yamaha lists ROOM CONTROL and HIGH TRIM. The HS5 is packaged individually.
  • When comparing bass response, keep the stated limits of 54 Hz at −10 dB and 74 Hz at −3 dB separate.

JBL Professional

The 305P MkII is an active monitor with analogue connections for a desk setup or placement near a wall.

  • JBL lists XLR/TRS connections, Boundary EQ and HF Trim.
  • The manufacturer describes Boundary EQ as a control for the effects of placement; this doesn’t prove that it will solve acoustic problems in every room.

Genelec

The 8010A is a compact active monitor for a workspace where the size of the cabinets is a key consideration.

  • Genelec lists dimensions of 195 × 121 × 115 mm with Iso-Pod, along with an analogue XLR input.
  • In a 2015 review, Sound On Sound noted its more limited deep bass as a drawback. Consider whether that matters for your mixing work.

ADAM Audio

The T5V is an active nearfield monitor with a 5-inch woofer, for a workspace where two cabinets will fit.

  • ADAM Audio lists a rear-facing bass reflex port and a frequency limit of 45 Hz at −6 dB.
  • The stated limit is a manufacturer’s specification; it isn’t a measurement of bass response from your listening position.

Kali Audio

The LP-6 V2 from the Lone Pine range is a larger nearfield option to consider if you have room for two cabinets.

  • Kali lists a 6.5-inch woofer for the LP-6 V2.
  • A larger cabinet or a stated bass limit doesn’t prove how accurately the bass will sound from your listening position. Kali’s claims about its sound are manufacturer claims, not an independent comparison with the other models.

Products related to this topic

Related products coming soon.

Frequently asked questions

How should I position monitors to assess backing vocals in stereo?

Place two monitors at the same height and distance, aimed at your listening position. Genelec recommends starting with a symmetrical equilateral triangle; then consider reflections from your desk and room too.

Can I connect an analogue studio monitor directly to my computer?

It depends on your computer’s outputs and the inputs on the exact model. The Yamaha HS5 lists XLR/TRS, while the Genelec 8010A has an analogue XLR input. Compare both ends of the connection before choosing cables or an audio interface.

Should I check the setup again after moving my desk?

Yes. Check the symmetry, height and direction of both monitors again. According to Genelec, their position in relation to surfaces and your listening position affects what you hear.

What are my rights if a monitor I bought online isn’t suitable?

Online consumer purchases often come with a statutory cooling-off period of up to 14 days after delivery; ACM ConsuWijzer outlines the exceptions. You’re also entitled to a product that meets reasonable expectations under normal use. According to ACM ConsuWijzer, there is no general fixed time limit for the statutory guarantee.

What should I check for electrical product safety?

The Dutch government states that electrical appliances offered on the EU market must carry a CE mark. Check the marking and the applicable product information for the model you’re considering.