Who is this guide for?

Mixing layered backing vocals

You want to assess the left-to-right placement and balance of vocal layers from one regular listening spot. Genelec recommends positioning monitors symmetrically around the listening position.

Creating music at a shallow desk

You need to fit in two speakers, a screen and cables, so you’re paying attention to dimensions and controls for positioning on or near the desk. ADAM Audio and Kali Audio describe settings for different desk and wall positions.

Mixing with an existing audio source

You want to connect a computer or audio interface without overlooking the input or stereo connection you need. Connections vary by model, so check the exact version.

What should you look for?

Start with your listening position and the space available for two speakers. Then check which input suits your audio source and whether the set includes one monitor or a pair.

What to consider What should you check? Who should prioritise this?
Stereo imaging and vocal layers Check whether both speakers can be positioned symmetrically, at the same height and aimed at the same listening spot. Genelec recommends a 60° angle between the monitors, with the listener ideally at the point of an equilateral triangle. I want to assess vocal layers from one regular spot, panned left and right; around 33% of consumers put stereo assessment first.
Space and positioning Measure the available width and depth for both cabinets and their cables. ADAM Audio lists positioning settings for the D3V; Kali Audio describes settings for different desk and wall positions for the LP-UNF. If my desk has limited space, I want to know whether both speakers will fit with their cables; around 27% of consumers put physical fit first.
Connecting to your audio source Note the stereo outputs on your computer or audio interface and compare them with the inputs on the exact model. ADAM Audio and Kali Audio list USB-C on the D3V and LP-UNF; also check whether the necessary cables are included. I want to use my existing computer or interface without running into an incompatible connection; around 20% of consumers put connection compatibility first.
Complete pair and bass specifications Check how many monitors are included in the box. Yamaha specifies 85 Hz at −3 dB and 70 Hz at −10 dB for the HS3 pair; these figures use different measurement tolerances and aren’t directly interchangeable. Before I mix in stereo, I want to know whether I’ll get two speakers and how the stated bass limit was measured; around 20% of consumers prioritise a complete set and clear bass specifications.

Buying pitfalls

  • Mistaking a single monitor for a stereo pair

    Genelec lists one 8010A per box, while Yamaha specifies the HS3 as a pair. So, for a stereo mix, check how many speakers you’ll actually need.

    Check what’s included in the box and which cables you’ll need to connect both monitors.

  • Comparing bass limits without checking the measurement tolerance

    Yamaha lists both 70 Hz at −10 dB and 85 Hz at −3 dB for the HS3. A frequency figure without the same measurement basis doesn’t allow a direct comparison.

    Check the dB tolerance alongside the frequency figure, and don’t judge whether a monitor will suit your mix on the basis of a single number.

  • Assuming correction switches can replace careful positioning

    Desk or wall placement settings can help you adjust your setup, but they don’t prove that the sound will automatically be right for your room. Genelec also stresses the importance of symmetry and positioning.

    First, position the speakers as evenly as possible, then use the settings intended for their placement.

Brands to consider

The examples below relate to specific product ranges and manufacturer specifications; they aren’t a review of every product from each brand.

Yamaha

Yamaha describes the HS3 as a compact active stereo pair for workspaces with limited room.

  • The specifications list several analogue inputs, plus room control and high trim switches.
  • Yamaha lists 70 Hz at −10 dB and 85 Hz at −3 dB for the HS3; check the measurement tolerance when comparing figures.

PreSonus

PreSonus offers the Eris 3.5 2nd Gen as a pair for compact desktop monitoring.

  • PreSonus lists balanced 6.35 mm TRS, RCA and 3.5 mm stereo inputs, as well as tone controls.
  • The stated 80 Hz–20 kHz range doesn’t, by itself, tell you how the monitors will sound in a particular room.

ADAM Audio

ADAM Audio describes the D3V as an active desktop system with digital and analogue connectivity.

  • ADAM Audio lists USB-C, two balanced TRS connections and included desk stands.
  • The positioning settings can help you adjust your setup, but they don’t guarantee a particular sound in your room on their own.

Kali Audio

Kali Audio describes the LP-UNF as an ultra-nearfield stereo system for desktop use.

  • The manufacturer lists settings for desk and wall positions, along with USB-C and balanced TRS inputs.
  • The settings don’t remove the need for careful positioning.

Genelec

Genelec describes the 8010A as a compact active monitor sold individually.

  • Genelec lists dimensions of 195 × 121 × 115 mm, including the Iso-Pod and compensation switches.
  • The box contains one monitor; you’ll need two for stereo playback.

Joybuy products

Related products coming soon.

Frequently asked questions

How should I position two monitors to assess backing vocals in stereo?

Aim both speakers at the same listening spot, keeping them as symmetrical as possible on the left and right, and at the same height. For music production, Genelec recommends a 60° angle between the monitors, with the listener ideally at the point of an equilateral triangle; adjust the setup to suit your room.

Can I put speakers close to a wall, or will a correction switch automatically fix the sound?

A wall or desk surface can affect the sound, and a switch won’t automatically guarantee the right sound for your room. Kali Audio lists settings for desk and wall positions on the LP-UNF; ADAM Audio describes position and desk settings for the D3V. Adjust the positioning to suit your room.

How can I check whether I’m buying a complete stereo pair?

Check how many monitors are included with the exact model. Genelec lists one 8010A per box; Yamaha specifies the HS3 as a pair. Also check which connection cables you’ll need to hook up both speakers.

What product safety information is relevant when buying active monitors in the Netherlands?

Electrical appliances must meet the applicable safety requirements. The Dutch government’s Ondernemersplein also states that appliances must not interfere with other devices. The Netherlands Enterprise Agency explains that CE is a conformity marking, not a quality mark or a guarantee of safety. For a specific product, check the exact version and power specifications.

Do I have a cooling-off period when buying online?

When you buy at a distance from a business, a 14-day cooling-off period applies in many cases, according to the Dutch government. The seller must inform you about this; check the terms of your specific purchase, as not every situation counts as a distance sale.