Who is this buying guide for?

Mixer with one free socket

You mix backing vocals in a small workspace and want to know in advance whether a complete stereo pair can run from a single mains connection. ADAM Audio describes the D3V as powered via the left speaker; also check how the two speakers connect to each other.

Mixer assessing stereo balance

You compare the positioning and level of vocal layers from one fixed listening position. A symmetrical setup and the room are important considerations; Genelec recommends starting with an equilateral triangle.

Mixer with an existing audio interface

You want the outputs from your existing interface to work with the monitors’ inputs, without unnecessary converters or an unsuitable cable. ADAM Audio, Yamaha, PreSonus and Genelec describe different audio connections for the models mentioned here.

What should you look for when buying?

When you have few free power sockets, the number of speakers isn’t the only thing that matters. Check the power setup, the connection between the left and right speakers, and the connections on your audio source too.

What to consider What should you check? Who is this important for?
Mains connections required Count the mains cables and check the power setup, the length of the speaker connection and what’s included in the box. I want to use a complete stereo pair without needing several free mains connections. Around 36% of consumers put the number of mains connections first.
Vocal balance and positioning Measure the space for both speakers and check whether you can angle them towards the same listening position; Genelec recommends starting with an equilateral triangle. I want to assess vocal layers and their position in stereo from my fixed listening position. Around 29% of consumers prioritise vocal balance and positioning.
Connecting to your equipment Note the outputs on your computer or interface and compare them with the inputs on the exact monitor model. I want to know in advance whether my existing audio outputs will work with the monitors. Around 21% of consumers make compatibility with their existing equipment their deciding factor.
Complete stereo system Check how many speakers there are, which cables are included and whether an amplifier is needed. I want to know what I need before I can use a complete stereo system. Around 14% of consumers prioritise the required set and components.

Common pitfalls

  • Assuming active automatically means one plug for the pair

    Active monitors can have different power setups. According to ADAM Audio, the D3V is powered via the left speaker; a set with two separately powered monitors needs a different setup.

    Count the mains cables needed for the complete stereo pair, and check the power supply and speaker connection for the exact model.

    This could mean you need an extra mains connection or a different power arrangement.

  • Mistaking one speaker or a passive speaker for a complete stereo set

    Genelec sells the 8010A individually, while the Yamaha HS3 is sold as a pair. A passive Avantone Mixcube also needs a suitable amplifier.

    Before buying, check how many speakers and cables are included, and whether you’ll also need an amplifier.

    You may need a second speaker, a suitable amplifier or extra cables for a complete system.

  • Treating the lowest stated frequency as a direct comparison of sound

    The specifications use different measurement limits. ADAM Audio gives 45 Hz at −6 dB for the D3V; Kali Audio gives 39 Hz at −10 dB and 54 Hz within ±3 dB for the LP-UNF. Your listening environment also affects what you hear.

    Only compare frequency ranges when the measurement limits match, and assess the vocals and mix in your own listening space.

Brands and models for reference

The features mentioned apply to the models and product ranges described. They are not a general assessment of a brand or a guarantee of how a product will sound in every room.

ADAM Audio

According to ADAM Audio, the D3V is a compact stereo set for desktop use, with USB-C audio, balanced TRS inputs and power supplied via the left speaker.

  • ADAM Audio lists detachable feet and switches for placement correction.
  • Check the mains plug and the connection between the speakers for the version on offer; placement settings alone don’t prove that it will sound a certain way in your room.

Yamaha

The HS3 is a compact stereo pair with audio connections on the left speaker and a speaker connection to the right.

  • Yamaha lists combo XLR/TRS, RCA and stereo mini-jack inputs, plus a 2,5 m speaker cable in the box.
  • Check the supply voltage on the rear panel of the version you buy, even if the stated range is 100–240 V.

PreSonus

The Eris 3.5 2nd Gen is a compact analogue stereo pair with TRS, RCA and stereo mini-jack inputs.

  • PreSonus lists an included speaker cable and high- and low-frequency controls.
  • The stated range of 80 Hz–20 kHz doesn’t include a dB tolerance, so don’t use it as a direct comparison for the bass response of models with a stated measurement limit.

Kali Audio

According to Kali Audio, the LP-UNF is an ultra-nearfield stereo pair for desktop use, with USB-C, balanced TRS and RCA connections, plus settings for different positions.

  • Kali Audio lists 39 Hz at −10 dB and 54 Hz within ±3 dB; these are different measurement limits.
  • Check the precise power setup and included connection for the version on offer.

Genelec

The 8010A is a small active monitor with an analogue XLR input per speaker, and is sold individually.

  • Genelec lists compact dimensions and room response switches.
  • You need two units for stereo; Genelec lists one mains cable per box, so allow for two power connections.

Avantone Pro

The passive Mixcube is designed as an additional reference speaker and is described as available individually or as a pair.

  • Avantone Pro lists a nominal impedance of 8 ohm and a recommended amplifier power of 10–200 watt.
  • The stated range is 200 Hz–10 kHz and a suitable amplifier is required; this isn’t automatically a complete main monitoring setup.

Joybuy products

Related products will be available soon.

Frequently asked questions

Do passive studio monitors mean I don’t need a power socket?

The passive speakers themselves don’t have mains plugs, but they do need a suitable amplifier, which must be powered. So be sure to account for the complete signal and power chain.

How should I position two speakers to assess backing vocals?

Angle both speakers towards the same listening position and start with an equilateral triangle. Genelec points out that room acoustics also affect what you hear, so assess the mix in your own workspace too.

Can I connect an active monitor directly to a power amplifier’s speaker output?

Don’t connect an active monitor directly to a power amplifier’s speaker output. Genelec warns that this could damage the input of its active monitors; use a suitable line output and follow the instructions for your equipment.

What product safety rules apply to electric studio monitors in the Netherlands?

CE marking is compulsory for electrical products covered by the relevant rules, according to the Netherlands Food and Consumer Product Safety Authority. The requirements also depend on the product, so check the relevant information for the specific model.

Who can help if a set used normally breaks down too soon in the Netherlands?

For a consumer purchase, the seller is responsible for the statutory guarantee. ACM ConsuWijzer states that, under the applicable conditions, a faulty product must be repaired or replaced free of charge, or you may be entitled to a refund; a manufacturer’s guarantee doesn’t replace this right.