Reviewer with a fixed listening position
You compare restoration versions from the same desk and want to prevent positioning and room reflections from influencing your judgement. Genelec provides guidance on symmetrical monitor placement.
When assessing restored archive audio, start by choosing a symmetrical stereo setup and connections that suit your computer or audio interface. Genelec recommends a 60° angle, with the listening position at the point of an equilateral triangle, as an ideal starting point. In a quiet room, you should also assess noise from your own listening distance, as both the monitors and the audio source can contribute. So rather than choosing based on which monitor you assume to be quietest, check the entire signal chain and positioning in your own setup.
You compare restoration versions from the same desk and want to prevent positioning and room reflections from influencing your judgement. Genelec provides guidance on symmetrical monitor placement.
You sit close to the speakers and want to distinguish whether audible noise is coming from the active monitor or the audio source. Genelec explains that self-noise can be audible at close range in a very quiet room.
You want to listen from a computer without first setting up separate analogue monitor outputs. ADAM Audio and Kali Audio describe models with USB-C connections.
| What to consider | What to look for | Who is this important for? |
|---|---|---|
| Assessing from your listening position | Check whether both speakers can be pointed symmetrically towards your regular listening position. Genelec recommends 60° and an equilateral listening triangle as an ideal starting point; Kali Audio describes positioning settings for desk and wall setups on the LP-UNF. | I compare restorations from the same position and want to minimise the effect of placement on my judgement; around 29% of consumers make a fixed listening position their top priority. |
| Noise during quiet passages | Listen from your intended position to a quiet passage and to silence with no signal playing. Genelec explains that self-noise can be audible at close range in a very quiet room; the source can also add noise. | I work close to the speakers and want to assess quiet details without mistaking hiss for part of the recording; around 29% of consumers give audible noise top priority. |
| Connecting to the audio source | First note the outputs on your computer or interface, then check the inputs on the exact model. ADAM Audio lists USB-C and balanced TRS for the D3V; Kali Audio lists USB-C and analogue connections for the LP-UNF. | I want to connect my computer without first having to arrange a suitable monitor interface; around 24% of consumers prioritise connecting to their existing source. |
| Space and a complete stereo pair | Measure the space available for the left and right speakers, and check the contents of the box. Genelec lists one 8010A per box; Yamaha also lists one HS5 per box. | I have limited desk space and want to know whether the units I buy will give me a complete pair; around 18% of consumers make space and pair size their top priority. |
The Genelec 8010A and Yamaha HS5 are each sold as a single monitor. One unit therefore does not automatically make a stereo pair.
Check the contents of the specific offer and plan for the complete stereo setup.
You need two monitors for a pair; depending on your setup, you may also need suitable cables.
Manufacturers may specify frequency limits using different dB definitions. As a result, the lowest printed figure alone is not a reliable way to compare performance in your listening space.
Check the dB definition for each specification and assess placement in your own room.
For optional MA 1 tuning with the Neumann KH 80 DSP, Neumann specifies additional equipment requirements.
Before choosing this option, compare the full setup required with the manual positioning settings.
The MA 1 setup requires, among other things, a measurement microphone and a suitable audio interface with a microphone input and phantom power.
The LP-UNF is a desktop stereo system with USB-C and settings for different desk and wall positions.
The D3V is designed for direct-connected desktop use; the T5V is a separate analogue nearfield monitor.
The 8010A is a compact, single analogue nearfield monitor for setups with limited space for each speaker.
The HS5 is a single active analogue nearfield monitor with adjustment controls.
The KH 80 DSP is an option for a fixed listening position where you are considering optional measurement-based tuning.
Position the left and right monitors as symmetrically as possible, point both towards your regular listening position and use Genelec's ideal starting angle of 60°. Adjust the setup to suit the room, as reflections and room modes will still have an effect.
No, not necessarily. Genelec explains that the self-noise of active amplifiers can be audible at close range in a very quiet room. The audio source can also add noise, so hearing hiss alone does not establish whether a particular unit is faulty.
No. For the optional MA 1 setup, Neumann specifies, among other things, an MA 1 measurement microphone and a suitable audio interface with a microphone input and 48 V phantom power. Check the system requirements for your own setup.
No. The Dutch government states that the Netherlands has no fixed statutory guarantee period; what you can expect from a product depends, among other things, on the product and the information provided. If a product is faulty, contact the seller.
The European product safety rules that apply depend, among other things, on the monitor's design and power supply. The NVWA explains that electrical equipment falls within the scope of the Low Voltage Directive when its nominal AC voltage is between 50 and 1,000 V or its nominal DC voltage is between 75 and 1,500 V. Where the relevant rules apply, the required CE marking and documentation are important. Check these for the exact unit being sold, rather than relying solely on a general product description.