Start by checking how many sockets are available, the outputs on your audio source and whether you have space to position both monitors in a comparable way. A stereo pair with a connecting cable may simplify the power setup, while two separate active monitors may each need their own power supply; the Genelec 8010A comes with one mains cable per unit. None of the specifications mentioned proves, on its own, that restoration artefacts will be easier to hear in your listening room.
Who are these monitors for?
Archive restorer with limited sockets
You compare original and edited recordings at one workstation and want to know in advance how many mains connections the complete stereo setup needs. Also check what’s included to connect the speakers and the manufacturer’s power requirements.
Editor using a computer or audio interface
You want to listen to audio from your existing source and make sure its outputs match the monitors’ inputs. ADAM Audio and PreSonus, for example, list USB-C audio or a range of analogue inputs; check which connection works with your equipment.
Listener with a cramped desk
You need space for two monitors around a fixed listening position. Genelec recommends starting with an equilateral triangle for stereo; measure your desk and surroundings to see whether this setup will work.
What should you look for when choosing?
Map out the complete stereo setup: power, connection to your audio source and where you can listen to the left and right channels. This lets you compare connections and positioning without treating specifications as a guarantee that you’ll hear restoration faults.
| What to consider |
What should you check? |
Who should prioritise this? |
| Power for the stereo setup |
Count the mains connections needed and check whether the box contains a pair and what cable connects the speakers. |
If I want to use a stereo setup at a workstation with limited sockets, I want to know in advance what both speakers need. Around 29% of consumers prioritise the power requirements of the complete stereo setup. |
| Listening for restoration faults |
Read the frequency range alongside its dB tolerance; assess positioning and the listening room separately. |
When assessing restoration work, I want to be able to pick up clicks, hum or new artefacts without assuming one specification can predict how my room will sound. Around 29% of consumers prioritise assessing restoration artefacts. |
| Connecting to your audio source |
Compare your computer or interface’s outputs with the monitor inputs and check which cables are included. |
I want to connect my existing computer or audio interface without guessing which cable or input I need. Around 24% of consumers prioritise compatibility with their audio source. |
| Positioning on your desk and in the room |
Measure to see whether both speakers will fit and point them towards the same listening position. Genelec recommends starting with an equilateral triangle for stereo. |
With a cramped desk, I want to position the left and right speakers as similarly as possible so that the listening position remains usable. Around 18% of consumers prioritise having a suitable listening position. |
Things to watch out for when buying
-
Assuming USB-C audio also means power from your computer
On the ADAM Audio D3V, USB-C is an audio input; the manual also describes a separate power adapter.
Check the power setup for the exact model before counting a USB-C port as a way to get around a shortage of sockets.
-
Treating one standalone monitor as a stereo pair
Genelec lists one monitor and one mains cable per 8010A pack. You’ll therefore need two units for stereo.
Check what’s in the box and add up what you’ll need for both channels.
-
Comparing frequency limits without checking the dB tolerance
The Yamaha HS3 lists a lower limit at −3 dB, while the Genelec 8010A lists one at −6 dB. These figures are not directly comparable.
Consider the frequency and measurement tolerance together, and assess the effect of your listening room separately.
-
Assuming an extension lead is an automatic solution
The Fire Service advises fully unwinding a cable reel when in use and not connecting high-power appliances through an extension lead.
Plan for the mains connections you need and follow the guidance for your equipment and power supply.
Relevant brands to consider
ADAM Audio
According to ADAM Audio, the D3V is a compact desktop set with USB-C audio and balanced analogue TRS inputs.
- ADAM Audio lists positioning switches and a connection between the speakers.
- The manual describes a separate power adapter. The manufacturer’s claims about sound quality are not an independent test of archive restoration.
Yamaha
The HS3 is a compact set sold as a pair, with analogue inputs and one amplifier for two speakers.
- Yamaha lists combo XLR/TRS, RCA and stereo mini-jack inputs, plus a speaker cable in the box.
- The stated lower limit of 85 Hz at −3 dB does not, on its own, tell you how well you’ll be able to assess low-frequency restoration faults in your room.
PreSonus
The Eris 3.5 2nd Gen is a compact stereo set with a range of analogue inputs and a headphone output.
- PreSonus lists TRS, RCA and stereo mini-jack inputs, plus a speaker cable in the box.
- The stated frequency response starts at 80 Hz, with no dB tolerance given on the product page consulted. Don’t compare this figure directly with a value at −3 or −6 dB.
Kali Audio
The LP-UNF is designed for desktop use and, according to Kali Audio, offers USB-C and analogue connection options.
- Kali Audio lists positioning settings and a range of digital and analogue inputs.
- For the specific version, check the power requirements, the connection between the speakers and the space available on your desk. The manufacturer’s claims about clarity and stereo imaging are not an independent assessment.
Genelec
According to Genelec, the 8010A is a small active monitor sold individually, with an analogue XLR input.
- Genelec publishes dimensions and frequency data with measurement tolerances.
- You’ll need two units for stereo. Genelec lists one mains cable in the box for each unit.
IK Multimedia
The specifications consulted describe the iLoud Micro Monitor as a linked stereo set supplied with a power supply and connecting cable.
- The product specifications list a 2 m cable between the speakers; one specifications page lists RCA and 3.5 mm inputs.
- Another IK Multimedia product page lists different connections and frequency data. Check the documentation for the exact version and don’t combine specifications from different versions.
Products on Joybuy
Related products coming soon.
Frequently asked questions
Does a USB-C connection on a monitor also supply power?
Don’t assume it does just because it’s an audio input. ADAM Audio describes USB-C on the D3V as being for digital audio; the manual also mentions a separate power adapter for the left speaker.
How should I position monitors for a consistent comparison?
Point the left and right speakers towards the same fixed listening position, and aim for similar distances and heights. Genelec recommends starting with an equilateral triangle for stereo; the room and reflections affect what you hear.
Do I need one or two Genelec 8010A monitors?
You’ll need two for a stereo pair: Genelec lists one 8010A and one mains cable per pack. Also allow for the mains connection and a suitable analogue signal connection for both channels.