Who are these monitors for?

Archive audio reviewer with a small desk

You compare restored files from a fixed listening position and want to position your speakers appropriately without overlooking the effect of your desk and room. Kali Audio describes settings for different desk and wall positions, while Genelec offers advice on stereo placement.

Reviewer without a suitable analogue audio interface

You want to connect your computer easily, so you’re comparing a stereo set with USB-C against separate analogue monitors. ADAM Audio, Kali Audio and Genelec describe different connection options for their models.

Reviewer looking to calibrate their listening room

You can set up a fixed stereo system and want to weigh up whether placement controls are enough or measurement-led calibration would be useful. For the KH 80 DSP, Neumann describes an optional calibration process using MA 1, along with the equipment required.

What should you look for when choosing?

What to consider What should you check? Who is this important for?
Judging from your listening position Check whether you can position two speakers symmetrically and aim them at your listening position. Compare the model’s placement controls with the setup you need. I want to account for reflections and the effect my room has on what I hear when assessing recordings. Around 33% of consumers prioritise being able to make reliable judgements from their listening position.
Connection to your audio source Make a note of your computer or interface outputs, then check the input type on the exact model and which cables you’ll need. If I don’t have a suitable analogue output, I want to know whether I can connect my computer directly. Around 27% of consumers prioritise connecting to their existing audio source.
Room for a stereo pair Measure the space available and work out whether both speakers can go in suitable, symmetrical positions. A compact cabinet won’t eliminate the effect of your desk. On a small desk, I want to position a left and right speaker without losing sight of the space I need to work. Around 20% of consumers prioritise having room for a stereo pair.
Complete setup Check how many speakers are in the box and whether you already have the necessary connections and equipment. I want to know in advance what I’ll need to put together a working stereo system. Around 20% of consumers prioritise having a complete setup.

Pitfalls to avoid when buying

  • Assuming the price of one monitor is the price of a stereo pair

    Genelec lists one 8010A monitor per box; Yamaha also lists the HS5 individually. So the price of a single monitor doesn’t tell you what you’ll need to pay for a stereo pair.

    Check how many speakers are included in the specific listing and compare what you’ll need for a complete stereo setup.

    If you buy a single monitor, you may need a second one and suitable cables for stereo.

  • Comparing frequency ranges measured at different limits

    A quoted limit at −3 dB is not the same measurement point as a limit at −6 or −10 dB. Your room and speaker placement also affect what you hear from your listening position.

    For each frequency range, note the measurement limit, then consider whether the dimensions and placement options suit your room.

  • Treating room correction as a substitute for good placement

    Position and reflections still have an effect. Neumann’s optional MA 1 calibration also has separate equipment requirements.

    First plan a listening position that’s as symmetrical as possible, then check which calibration options your model offers.

    The optional MA 1 measurement process may require a measurement microphone, a suitable audio interface and a computer.

Relevant brands to consider

ADAM Audio

ADAM Audio describes the D3V as an active desktop stereo set with USB-C and balanced TRS inputs. The T5V is a separate analogue nearfield monitor.

  • For the D3V, ADAM Audio lists detachable stands and placement switches.
  • For the T5V, check the space needed behind the rear bass reflex port and the exact sales unit.

Kali Audio

Kali Audio describes the LP-UNF as a nearfield monitor for very close listening at a desk, with USB-C and analogue connection options.

  • The manufacturer lists settings for different desk and wall positions.
  • Frequency figures have specific measurement limits. Claims about stereo imaging or clarity aren’t independent measurements taken at your workstation.

Genelec

Genelec describes the 8010A as a compact, individual active monitor with an analogue XLR input and placement controls.

  • The stated dimensions can help you plan your available space; Genelec lists one monitor per box.
  • The low-frequency limit of 67 Hz at −6 dB is a manufacturer specification and can’t be directly compared with other figures unless they use the same measurement basis.

Neumann

Neumann describes the KH 80 DSP as a compact DSP nearfield monitor with a placement switch and an optional measurement-led calibration process using MA 1.

  • The optional MA 1 process offers a way to calibrate a stereo setup using measurements.
  • Neumann lists separate equipment requirements for MA 1, including a measurement microphone, a suitable audio interface and a computer.

Yamaha

Yamaha describes the HS5 as an individual active nearfield monitor with XLR and TRS inputs, plus controls for room influence and high frequencies.

  • The inputs and controls offer connection and adjustment options that you can compare with those of your audio source.
  • Yamaha lists the HS5 individually. The figures of 54 Hz at −10 dB and 74 Hz at −3 dB refer to different points on the same response and don’t, on their own, determine how the bass will sound in your room.

Joybuy products

Related products will be available soon.

Frequently asked questions

How should I position a stereo pair before assessing a restored recording?

Aim both monitors at your listening position and try to place them at the same height and the same distance from nearby side walls. For stereo, Genelec recommends an ideal equilateral triangle; this is placement advice, not a guarantee that an untreated room will sound neutral.

Do I also need an audio interface for monitors with USB-C?

Not just to connect a suitable computer to the USB-C input described by ADAM Audio for the D3V or by Kali Audio for the LP-UNF. If you choose analogue monitors, first check your source’s outputs and the cables you’ll need. Neumann’s optional MA 1 calibration has separate interface and measurement microphone requirements.

What can I do if the room changes what I hear?

First check the placement and symmetry between left and right. Then use only the controls your model actually has. If you want to calibrate the KH 80 DSP with MA 1, check Neumann’s equipment requirements in advance.

What guarantee and cooling-off period apply to purchases in the Netherlands?

According to the Government of the Netherlands, there is no fixed term for the statutory guarantee. What you can expect from a product depends, among other things, on the product and how it is used; if a product is faulty, the seller is your point of contact. ACM ConsuWijzer states that online purchases generally come with a 14-day cooling-off period after delivery; exceptions may apply. An extra paid-for guarantee does not replace your statutory rights.

What product safety rules apply to active monitors in the Netherlands?

According to Business.gov.nl, electrical and electronic devices placed on the market in the Netherlands must comply with the applicable European rules. Check the information for the specific product version you intend to buy; this general rule does not confirm that a particular listing complies.