Who are these monitors for?

Archival audio reviewers

You compare the original with the restoration, listening for noise, clicks and any new artefacts. iZotope stresses that processing should not introduce unwanted artefacts.

Editors with a small desk

You need to fit and connect your speakers, screen and playback source in a limited workspace beside a bright window. ADAM Audio lists both USB-C and analogue TRS connections for the D3V.

Users with a dedicated listening room

You can leave your stereo setup in place and are considering room calibration, but want to account for placement and reflections first. Neumann describes an optional MA 1 measurement-based setup for the KH 80 DSP.

What should you look for when choosing?

Start with placement and reflections around the window: Genelec points out that similar reflections for the left and right monitors are important for the stereo image. Room calibration cannot replace this initial check.

Compact desktop set

Choose this option if: you have limited desk space and want to connect a compatible computer directly via USB-C. The ADAM Audio D3V also has analogue TRS inputs.

Keep in mind: you still need enough room for both speakers and a compatible audio source, and you must be able to position the set symmetrically.

Two separate active nearfield monitors

Choose this option if: you can place the left and right speakers separately and have suitable analogue outputs. The Genelec 8010A and Yamaha HS5 are examples you can compare for their inputs, dimensions and placement controls.

Keep in mind: both models are sold individually. Check the cables too, and only compare frequency limits when the measurement definitions match.

Adjustable system for a dedicated listening position

Choose this option if: you can leave your setup in one place and want to explore additional room calibration. Neumann describes an optional MA 1 measurement-based setup for the KH 80 DSP.

Keep in mind: the MA 1 setup requires additional equipment and preparation. Calibration cannot remove the effects of poor reflections or asymmetrical placement.

Purchasing concern What should you check? Who is this most important for?
Stereo image beside a window Can both speakers be placed at a similar height and distance from surfaces, and angled towards your listening position? When I listen beside a bright window, I want to position the left and right speakers similarly so I don’t mistake reflections for restoration artefacts. Around 36% of consumers in this situation prioritise placement.
Room for a stereo pair Measure the space for both speakers and check the dimensions, stands and cable clearance required for the model. At a cramped desk, I want to fit a stereo pair without compromising a symmetrical setup. Space is the main purchasing concern for around 29% of consumers in this situation.
Assessing restoration details Listen to familiar clips in your intended position, and only compare frequency limits when the measurement definitions match. If I want to assess noise, clicks and new processing artefacts, my listening position should interfere with my comparisons as little as possible. Around 21% of consumers in this situation prioritise this assessment.
Connections and what’s included Compare your computer or audio interface outputs with the model’s inputs, and check how many speakers and cables are included. Before I choose, I want to know whether my source will connect and whether I’m actually getting a stereo pair. For around 14% of consumers in this situation, connections and what’s included are the main purchasing concerns.

Things to watch out for when buying

  • Mistaking a single monitor for a stereo pair

    Genelec says the 8010A is supplied individually, and Yamaha says the same of the HS5. An offer for one monitor is therefore not automatically a complete stereo setup.

    Check how many speakers are included with the exact model, and which cables come with it.

    You may need to buy a second monitor for a stereo pair, as well as suitable cables.

  • Assuming room correction can replace good placement

    Reflections and uneven distances around a stereo pair can affect what you hear from your listening position.

    First assess the placement and reflections by the window. Then consider any available calibration as an additional step.

  • Comparing low-frequency limits without checking how they’re measured

    Genelec gives the 8010A’s low-frequency limit at −6 dB, while Yamaha lists limits for the HS5 at −10 dB and −3 dB. These figures are not directly comparable without further context.

    When checking frequency figures, look at the limit and measurement basis, then compare them in your intended listening position.

Brands to compare

ADAM Audio

The D3V is a compact active desktop set with USB-C and analogue TRS inputs, suited to a workspace where a direct computer connection matters.

  • ADAM Audio lists stands, mounting points and room compensation switches.
  • These are model features, not independent evidence of performance with archival audio. Check whether the set will fit and sit symmetrically beside the window.

Genelec

The 8010A is a compact active monitor with an analogue XLR input, designed to be positioned as an individual monitor in a setup.

  • Genelec lists a width of 121 mm and a low-frequency limit of 67 Hz at −6 dB.
  • You need two for stereo. Consider the measurement definition and listening context when assessing the stated low-frequency limit.

Yamaha

The HS5 is an individual active nearfield monitor with XLR and TRS inputs, plus ROOM CONTROL and HIGH TRIM controls.

  • Yamaha lists frequency limits at both −10 dB and −3 dB.
  • The HS5 is supplied individually. Its controls do not guarantee a neutral sound in an asymmetrical position beside a window.

Neumann

The KH 80 DSP is a model to compare for a dedicated workspace where listening-room calibration is a consideration.

  • Neumann describes a placement switch and an optional MA 1 measurement-based setup.
  • The MA 1 setup requires additional equipment and preparation. The manufacturer’s description is not an independent measurement of the results beside your window.

Hercules

The DJMonitor 42 is an active set with an RCA main input and controls on the right speaker, suited to anyone who values a simple analogue connection.

  • Hercules lists two speakers, an RCA cable, and bass and treble controls.
  • The manufacturer also positions this set for DJ use, so its suitability as a critical reference for restoration has not been independently established.

Joybuy products for this listening setup

Related products will be available soon.

Frequently asked questions

Do I need an audio interface for every active studio monitor?

No, it depends on the model’s connections and your audio source. ADAM Audio lists a USB-C input for compatible computers and analogue TRS inputs for the D3V; according to Genelec, the 8010A has an analogue XLR input. Compare your source’s outputs with the inputs on the exact model.

How should I position speakers beside a window?

Angle both speakers towards your listening position and place them as symmetrically as possible. Genelec explains that similar reflections on the left and right are important for the stereo image, so assess the position itself before relying on room calibration as a solution.

Is measurement-based calibration included with the Neumann KH 80 DSP?

No, Neumann describes MA 1 as an optional calibration setup. Neumann lists an MA 1 measurement microphone and a compatible audio interface among the equipment required. Check which components are included in the specific offer.

What are my rights when buying online in the Netherlands?

For eligible distance purchases by consumers, you generally have a statutory 14-day cooling-off period after delivery, although exceptions apply. ACM ConsuWijzer also explains that, under the statutory guarantee, the seller must resolve issues with a faulty product. How long this applies depends on what you can reasonably expect from the product; it is not automatically exactly two years. Check the relevant terms separately if you’re buying for business purposes.

Can I simply plug an active monitor into a mains socket?

First check that the required supply voltage matches your power supply. ADAM Audio’s D3V manual warns against connecting the device if the voltages do not match, and recommends switching the system off before connecting or disconnecting cables.