Who is this choice for?

Student with a small mixing desk

You want to place a stereo pair beside your screen and mix from a fixed listening position. Measure the space and aim for symmetrical placement. Genelec explains how positioning and the room can affect the sound at your listening position.

Animator mixing from a laptop

You want to connect your computer without unnecessary steps. Check whether USB-C audio suits your workflow, or whether you need a compatible analogue output and cable. ADAM Audio and Kali Audio list USB-C on the D3V and LP-UNF respectively.

Score composer working with critical bass parts

You also want to assess low frequencies. Only compare frequency specifications if they use the same measurement limit, and bear your room and speaker placement in mind. A low stated Hz figure alone doesn’t prove that the bass response is flat.

What should you look for when buying?

First, choose between a compact set with a suitable direct connection, a very small analogue set or larger individual monitors. Then measure your setup and check exactly what’s included in the sale.

Compact desktop speakers with USB-C

Choose these if: you’re short on space and want to work directly from a computer. The ADAM Audio D3V and Kali Audio LP-UNF have USB-C and placement settings.

Trade-off: check the cabinet dimensions and make sure the USB connection suits your source. ADAM states that USB playback on the D3V uses internal processing at 48 kHz/16-bit.

Very small analogue set

Choose this if: desk space is your priority and you have a suitable analogue output. The original IK Multimedia iLoud Micro Monitor is supplied as a pair with RCA and 3.5 mm inputs.

Trade-off: check that your existing output and cables are compatible. The stated 45 Hz frequency limit is at −10 dB; it doesn’t mean the bass is reproduced flat at that point.

Traditional nearfields or a compact analogue set

Choose these if: you have enough room for larger monitors or ones sold individually, or you’re looking for a compact analogue set. Examples include the ADAM Audio T5V and PreSonus Eris 3.5 2nd Gen.

Trade-off: the T5V is sold individually, while the Eris 3.5 2nd Gen is listed as a pair. PreSonus gives the Eris a frequency response starting at 80 Hz.

What to consider What should you check? Who is this important for?
Desk placement and stereo positioning Measure the space for two speakers and check whether you can position them symmetrically, at the same height and aimed towards your listening position. If I need to place the speakers beside my screen, I want to be able to judge the left and right channels clearly from my listening position. Placement is the top buying priority for around 33% of consumers.
Connections for your mixing setup Compare your computer or interface output with the inputs on the exact model, and check which cables you’ll need. I want to connect from my laptop or interface without unnecessary extra steps. Ease of connection is a priority for around 27% of consumers.
Assessing low frequencies When looking at frequency figures, note the dB limit and don’t treat values with different measurement limits as if they were equivalent. If my animation score includes critical bass parts, I want to know how the specification relates to my listening position and room. Assessing low frequencies is the top priority for around 20% of consumers.
A complete stereo pair Check whether the offer is for one speaker or a pair, and which cables are included. I want to know in advance how many speakers and connection cables I’ll need to mix in stereo. Buying a complete stereo pair is a priority for around 20% of consumers.

Common buying mistakes

  • Assuming the price for one speaker covers a stereo pair

    A single monitor isn’t automatically a pair. Dutch listings for the ADAM Audio T5V and Genelec 8010AP are for one speaker, while the other models reviewed are sold as pairs.

    Before buying, check whether the price is for one speaker or a pair, and which cables are included.

    If a model is sold individually, you’ll need a second speaker for stereo. You may also need extra connection cables.

  • Assuming the lowest Hz figure is directly comparable as a measure of bass performance

    Manufacturers use different limits, such as −6 dB and −10 dB. Your room and speaker placement also affect what you hear at your listening position.

    Only compare frequency specifications when you know the measurement limit, and consider how you plan to position the speakers.

  • Assuming a small monitor will sound the same everywhere

    Speaker position, room surfaces and objects can all affect the sound at your listening position. Placement settings won’t automatically remove these effects.

    Start by planning a symmetrical setup and aim both speakers towards your listening position. If your desk or room limits your options, you may need to change the layout.

    A symmetrical setup may require more clear space on your desk or a change to your listening position.

Brands and relevant model ranges

ADAM Audio

The D3V is a compact active desktop set; the T5V is a larger nearfield monitor sold individually.

  • ADAM Audio lists USB-C and balanced TRS inputs for the D3V. For USB playback, ADAM specifies internal processing at 48 kHz/16-bit.
  • The T5V has a rear-facing bass-reflex port and is sold individually, so you’ll need two speakers for stereo.

Kali Audio

Kali Audio says the LP-UNF is designed for desktop mixing and has USB-C, TRS and RCA inputs.

  • Kali Audio describes separate settings for desk placement, including options for positioning the speakers close to or further away from a wall.
  • The stated 39 Hz limit is at −10 dB; this figure alone doesn’t prove that the bass response will be flat at your workstation.

IK Multimedia

The original iLoud Micro Monitor is a very small active stereo set with analogue inputs.

  • IK Multimedia lists dimensions of 180 × 135 × 90 mm per speaker and says they’re supplied as a pair. Connections are RCA and 3.5 mm.
  • This is the original Micro Monitor, not the separate Micro Monitor Pro. The stated 45 Hz frequency limit is at −10 dB.

PreSonus

The Eris 3.5 2nd Gen is a compact analogue stereo set; the version reviewed is not the 3.5BT.

  • PreSonus lists balanced TRS and unbalanced RCA inputs, as well as a headphone output on the front.
  • The stated frequency response starts at 80 Hz. Bear this model specification in mind when making decisions about bass parts.

Genelec

Genelec describes the 8010A as a monitor for small studios or mobile use.

  • For the 8010A, Genelec lists dimensions of 195 × 121 × 115 mm including the Iso-Pod, and a 67 Hz frequency limit at −6 dB.
  • A Dutch listing for the 8010AP is for one speaker. Check the exact version before buying; the 8010AP isn’t treated here as identical to the 8010A reviewed.

Joybuy products

Related products coming soon.

Frequently asked questions

How should I position two monitors for stereo mixing?

Aim both speakers towards your listening position, starting with equal distances to the left and right. Genelec recommends using an equilateral triangle as a starting point, with a 60° angle between the speakers. Then check how your desk and room affect the sound where you listen.

Can I listen over Bluetooth while mixing?

For timing-sensitive listening, use a suitable wired connection. For the original iLoud Micro Monitor, IK Multimedia lists system latency of 1.02 ms via analogue and 155 ms via Bluetooth in the test setup described. These are model-specific measurements, not general Bluetooth figures.

What should I check if my workspace changes?

If you move your screen, desk or speakers, check the symmetry, direction and any placement settings again. Genelec explains that large objects and surfaces can affect the sound at your listening position.

What cancellation period and warranty apply when buying online in the Netherlands?

For online purchases from a business, you’ll usually have a 14-day cancellation period, according to the Government of the Netherlands. Dutch law also provides a legal guarantee without a fixed statutory guarantee period. If a product is faulty, contact the seller. Before buying, check who the seller is and whether an exception applies.

Do electrical monitors need a CE marking, and what should I do with old ones?

According to the Government of the Netherlands, electronic devices placed on the EU market must have a CE marking. The Government also describes a take-back scheme for old equipment when you buy a new product, including equipment bought online. Check with the seller how you can return your old device.