Who are these studio monitors for?

Student with a small mixing desk

You need to fit two speakers around one listening position and want them to be as symmetrical as possible. Genelec recommends placing the monitors at a 60-degree angle, with the listener at the point of an equilateral triangle.

Composer who needs to assess the low end

Your score includes low-frequency content that you want to check carefully. Compare frequency limits alongside their dB tolerances, and bear in mind that the room also affects what you hear.

Creator who regularly compares versions

You switch between versions of the music and visuals, and want to assess the differences without inadvertently changing your listening position or monitor settings too. The connections also need to work with your existing equipment.

What should you look for when choosing?

First, check that two monitors will fit your workstation and connect to your equipment. Then consider their low-frequency response and how many speakers you actually need.

What to consider What should you look for? Who is this important for?
Stereo placement Measure whether two cabinets will fit symmetrically around your listening position, allowing space around the monitors. If your desk has limited space, you’ll want a suitable arrangement that doesn’t leave the left and right speakers unevenly placed. Around 36% of consumers prioritise stereo placement.
Low-frequency response Compare both the frequency limit and the dB tolerance; these figures aren’t directly comparable on their own. For bass-heavy passages, you’ll want to know the limit stated by the manufacturer and the measurement tolerance used. Around 29% of consumers prioritise assessing the low end.
Connections and settings Check the outputs on your audio equipment, the inputs on the monitors and whether you’ll need any cables. Keep your listening position and monitor EQ the same when comparing. If you regularly compare project versions, you’ll want to connect to your existing equipment and avoid confusing mix differences with changes to the monitor settings. Around 21% of consumers prioritise connectivity and repeatable comparisons.
Complete stereo pair Check whether the package contains one speaker or a pair, and work out how many you’ll need for stereo. If you need a complete stereo pair, the number of speakers in the package determines what else you’ll need to buy. Around 14% of consumers make this their top priority.

Common buying pitfalls

  • Assuming one monitor means you’re buying a stereo pair

    The Yamaha HS5 is packaged individually, while the PreSonus Eris 3.5 2nd Gen is sold as a pair. So the number of speakers included can vary between offers.

    Before you choose, check how many speakers are included and which connections you’ll need.

  • Comparing frequency limits without checking the dB tolerance

    A frequency limit at −10 dB isn’t measured at the same point as one at −6 dB. The room also affects how the low end sounds at your listening position.

    Note the dB tolerance alongside each stated limit, and use a second listening reference for bass-heavy passages if needed.

  • Changing monitor settings while comparing project versions

    If you adjust the monitors in between, both the project version and the listening settings change. KRK lists different sound modes and EQ settings for the ROKIT 5 Generation Five.

    Note your listening position and monitor settings before comparing versions side by side.

Brands to consider

PreSonus

The Eris 3.5 2nd Gen is designed as a compact pair for a small workspace, where a choice of analogue connections can come in handy.

  • PreSonus lists multiple input types, a headphone socket on the front, and high- and low-frequency controls.
  • The manufacturer’s ‘studio-quality’ claim isn’t an independent comparison. Decide for yourself whether this compact model offers enough low-end reference for your score.

Yamaha

The HS5 is a five-inch active nearfield monitor for those looking for individual speakers with XLR or TRS connections.

  • Yamaha lists ROOM CONTROL and HIGH TRIM controls.
  • The HS5 is packaged individually. Its stated lower limit of 54 Hz is at −10 dB, so bear this in mind when comparing it with figures using a different tolerance.

ADAM Audio

The T5V is a five-inch active nearfield monitor to consider when both low-frequency response and available space matter.

  • ADAM Audio specifies a frequency limit of 45 Hz at −6 dB and a rear-facing bass reflex port.
  • These are manufacturer specifications, not an independent measurement in your room. Check that the rear port will work with your intended placement.

Genelec

The 8010A is a compact active monitor for a workspace where the size of each cabinet is a key consideration.

  • Genelec specifies a cabinet width of 121 mm and one analogue XLR input.
  • The stated lower limit is 67 Hz at −6 dB. Its compact size doesn’t automatically mean you’ll be able to assess deep bass in full.

KRK

The ROKIT 5 Generation Five is an individual active monitor to consider if you want to be able to choose between different adjustment modes.

  • KRK lists three sound modes and 25 combinations of placement and EQ settings.
  • These features don’t show that the effects of the room are completely eliminated. Keep the selected mode the same when comparing project versions, and check how many speakers are included in the offer.

Joybuy products

Related products coming soon.

Frequently asked questions

How should I position two monitors to compare score versions?

Position the monitors as symmetrically as possible, aim them at the same listening position and keep that position fixed while you compare. Genelec describes a 60-degree angle between the monitors as the ideal stereo setup; the room and reflections will still affect what you hear.

Will a different studio monitor mode help me manage project versions?

No. A sound mode changes the monitor settings; you manage project versions in the software you’re using. According to Steinberg, Cubase Pro 15 supports track versions for audio, MIDI and video tracks, among others, but this feature isn’t automatically available in other programmes or editions.

How do I compare the low-frequency response of different monitors?

Compare the stated frequency limit alongside the dB tolerance. For example, Genelec lists 67 Hz at −6 dB for the 8010A, ADAM Audio lists 45 Hz at −6 dB for the T5V, and Yamaha lists 54 Hz at −10 dB for the HS5. So don’t treat the HS5 figure as a measurement at the same tolerance.

How can I stop monitor settings affecting my comparison of mix versions?

Keep the position of both cabinets and your chosen monitor settings the same when comparing versions. If you change the setup, reassess earlier mix decisions from the same listening position, as the room also affects what you hear.

What should I look for when buying a stereo pair?

Check whether the offer includes one or two speakers, and whether the connections are compatible with your audio equipment. Yamaha lists the HS5 as one speaker per package; PreSonus sells the Eris 3.5 2nd Gen as a pair.