Who are these monitors for?

Mix engineer working in changing listening environments

You often switch between projects and sometimes between listening positions or monitor setups. You want to be able to recall your listening settings without assuming that the monitor recognises your DAW project. Genelec describes GLM groups for different listening positions and input types, among other things.

Recital mix engineer with a fixed workstation

You assess stereo placement and reverberation from a single listening spot, so you need to be able to position both speakers appropriately. Neumann recommends a listening distance of 1–2 metres for the KH 120 II; measure up to see whether that distance suits your setup.

Mix engineer assessing quiet details

When working with acoustic recordings, you listen for quiet passages as well as peaks. Compare the frequency range and listening distance under the relevant measurement conditions; Kali Audio highlights dynamic range and listening distance as factors to consider when choosing.

What should you look for when choosing?

First decide whether you want to recall settings across different listening setups. Then check that two monitors will fit around your listening spot and connect to your interface.

What to consider What to look for when buying Who is this important for?
Recalling settings Check whether settings for listening positions or monitor configurations can be saved and recalled, and what equipment you need to do so. If I often switch between listening positions or monitor setups, I want to be able to recall my monitoring settings without expecting the monitor to recognise my DAW project. Around 31% of consumers say being able to recall monitoring settings is their main priority.
Listening spot and stereo image Measure whether two monitors will fit symmetrically and check the recommended listening distance for your intended setup. From a fixed listening spot, I want to be able to assess the stereo image and position the speakers appropriately. Around 31% of consumers say positioning and the listening room are their main priorities.
Detail and dynamics Compare frequency ranges measured at the same dB level, and also consider dynamic range and listening distance. For an acoustic recital, I want to be able to assess quiet details alongside louder passages. Around 25% of consumers say detail and dynamics are their main priorities.
Connections and stereo pair Check that the inputs are compatible with your interface outputs and whether the offer includes one speaker or two. If I want to connect my interface and listen in stereo straight away, I want to know which speakers and cables I’ll need. Around 13% of consumers say connectivity and a complete stereo pair are their main priorities.

Common buying mistakes

  • Mistaking an offer for one speaker for a stereo pair

    A package containing one monitor isn’t enough for a stereo pair, so your setup may still be incomplete.

    Check what’s included in the exact offer and work out how many speakers you need before comparing models.

  • Mistaking calibration support for a complete system

    A monitor with GLM or MA 1 support doesn’t automatically include everything you need to take measurements.

    Check which software, controller, measurement microphone and other equipment your chosen system requires, and what the offer includes.

  • Comparing low-frequency limits without checking the measurement conditions

    A stated lower limit at −10 dB isn’t the same as one at −3 dB. Your listening room also affects what you hear.

    Compare frequency ranges using the same dB definition and assess the monitor in your intended setup.

Brands to compare as a reference

Genelec

The 8330A is a compact studio monitor for anyone who wants to use GLM calibration and selectable groups.

  • Genelec says the 8330A supports GLM, which lets you manage groups for different listening positions, among other things.
  • The package contains one monitor. Calibration also requires a GLM Calibration Kit or a compatible controller.

Neumann

The KH 120 II is a nearfield option for a fixed or temporary mixing space where room correction is important.

  • Neumann recommends a listening distance of 1–2 metres for the KH 120 II and says it supports MA 1.
  • MA 1 requires additional equipment, including a measurement microphone and a suitable audio interface. Check what your setup needs.

ADAM Audio

The A7V is a DSP nearfield monitor for anyone looking to compare voicings and room-correction controls.

  • ADAM Audio describes Pure as a neutral voicing and offers control through ADAM Control.
  • The A7V has a 7-inch woofer, so check that the cabinet will fit. The voicing description doesn’t prove it has an advantage over other brands.

Kali Audio

The LP-6 V2 is an analogue nearfield option to assess in terms of listening distance, positioning and use as a stereo pair.

  • Kali Audio highlights dynamic range, listening distance and bass response as factors to consider when choosing.
  • Compare stated performance only under suitable measurement conditions, and check whether the listening distance suits your mixing space.

Yamaha

The HS5 is an analogue nearfield option for a fixed setup with an XLR or TRS connection.

  • Yamaha lists Room Control and High Trim. Its stated lower frequency limit is 54 Hz at −10 dB, not at −3 dB.
  • Check that the connections are compatible with your interface. If you want to recall settings, check whether the selected model has the functions you need.

Joybuy products

Related products coming soon.

Frequently asked questions

Will a monitor save my settings when I open a different audio project?

Don’t assume it will: automatic linking to a DAW project hasn’t been demonstrated. Genelec documents selecting GLM groups for different listening positions and input types, among other things. Check how your chosen system manages settings.

What do you need to set up two monitors?

You need two speakers, compatible outputs and cables, and enough space to position the speakers symmetrically around your listening spot. For MA 1, Neumann also lists a measurement microphone, computer and audio interface with the required connections.

What should you check when it comes to additional components?

Check whether the offer includes one monitor or a pair, and what you’ll need for any calibration. For GLM calibration, the 8330A requires a separate kit or compatible controller in addition to the monitor; MA 1 requires additional measurement equipment.

What regulations apply to an electric studio monitor?

Business.gov.nl describes European safety requirements and an EU declaration of conformity as obligations for electrical and electronic equipment sold in the Netherlands. This says nothing about mixing quality, and doesn’t confirm that a specific offer is compliant without a product-specific check.