Who are studio monitors for a theatrical soundtrack suitable for?

Stereo mixer working at a small desk

If you mix a stereo soundtrack from one fixed listening position, you’ll need to be able to position two monitors symmetrically around it. Genelec describes a 60° angle between the left and right speakers as the ideal stereo position.

Dialogue and effects mixer

You want to assess speech, music and effects separately, and check whether important low-frequency effects are clear enough at your workstation. Compare quoted frequency limits alongside their measurement references, and listen to the result in the position you plan to use.

Creator working on a multichannel project

If the project genuinely requires more than two playback channels, choose a suitable monitor setup first. Don’t assume that a stereo pair represents the full multichannel mix.

What should you look for when buying studio monitors?

First, establish the required channel format. Then choose based on how easily the monitors can be positioned, bass monitoring and connections.

What to consider What to look for Who is this most important for?
Stereo image and channel setup Check how many channels are required and whether two monitors will fit symmetrically around your listening position. If I’m making a stereo mix, I want to position two monitors properly around my listening position; around 31% of consumers give channel setup and stereo imaging top priority.
Bass and low-frequency effects Compare frequency limits only alongside their stated dB reference, and consider whether the project includes deep effects. If I want to assess low-frequency effects and bass in music, I look at both the limits and the sound at my listening position; around 25% of consumers make monitoring low-frequency effects their top priority.
Room acoustics and positioning Measure the available space and listening distance, and check the positioning and tone controls on the exact model. If my desk or room limits my listening position, I want to find a setup I can realistically try out; around 25% of consumers give room acoustics and positioning top priority.
Complete setup and connections Check how many monitors are included in the package and whether the inputs are compatible with your audio interface. If I want to plan for all the monitors and connections I need in one purchase, I check the package contents and connections; around 19% of consumers make a complete setup and connectivity their top priority.

Common mistakes when buying studio monitors

  • Assuming the price is for a stereo pair

    According to the manufacturers, the Genelec 8020D and Yamaha HS5 are packaged individually. So you’ll need two monitors for a stereo pair.

    Check how many speakers are included in each package, and plan your complete setup before comparing models.

    A stereo pair may also require a second monitor and suitable connection or positioning accessories.

  • Comparing frequency limits as though they use the same measurement

    Yamaha quotes different frequency limits for the HS5 at −10 dB and −3 dB. Room acoustics also affect what you hear at your listening position.

    Check the dB reference alongside each frequency limit, and assess the bass in the room where you’ll be mixing.

  • Treating room controls as a substitute for good positioning

    Reflections from your desk and walls, as well as the position of the monitors and listener, can affect the sound.

    First, plan a listening position that’s as symmetrical as possible, then use the model-specific settings to help fine-tune it.

    Trying different positions and acoustic treatments may take extra time and materials.

Brands to compare for your listening space

Genelec

The 8020D is a compact nearfield monitor worth comparing if desk space is limited.

  • Genelec lists dimensions of 242 × 148 × 142 mm and a frequency response of 56 Hz–25 kHz at −6 dB.
  • According to Genelec, the package contains one monitor. The quoted frequency limit alone doesn’t tell you how the bass will sound in your room.

ADAM Audio

The active T5V is a 5-inch nearfield monitor that the manufacturer describes as suitable for small control rooms.

  • ADAM Audio lists a frequency response of 45 Hz–25 kHz at −6 dB.
  • The T5V has a rear-facing bass port, so check whether its position suits the spot where you plan to place the monitor.

Yamaha

The HS5 is a compact nearfield monitor with connections and settings to consider as part of your comparison.

  • Yamaha lists XLR and TRS inputs, as well as ROOM CONTROL and HIGH TRIM settings, for the HS5.
  • The quoted frequency limits are 54 Hz–30 kHz at −10 dB and 74 Hz–24 kHz at −3 dB; don’t compare these measurement references as though they were the same. The HS5 is packaged individually.

Kali Audio

The LP-6 2nd Wave is a model to look into if bass monitoring or the possibility of expanding your system is a consideration.

  • Kali Audio lists a lower limit of 39 Hz for the LP-6 and describes options for immersive setups.
  • A quoted lower limit doesn’t prove that the bass will be easy to assess at your listening position; positioning and room acoustics matter too.

KRK

The ROKIT 5 Generation Five is an active 5-inch monitor with settings for different listening tasks.

  • KRK lists Mix, Focus and Create modes, plus 25 combinations of boundary and EQ settings.
  • These manufacturer features don’t prove that the settings are enough without careful positioning and monitoring.

Joybuy products for this listening setup

Related products coming soon.

Frequently asked questions about studio monitors for a theatrical soundtrack

How should you position a stereo pair for making mix decisions?

Aim both monitors at one listening position, placing them at equal distances and as symmetrically as possible in relation to the side walls. Genelec describes a 60° angle between the left and right monitors as the ideal stereo setup, although not every home office has enough space for it.

Do you always need to mix a theatrical soundtrack using surround monitors?

No. First, establish which channel format the project requires. A stereo pair may suit a stereo mix, but it isn’t a complete setup if you need to assess individual surround channels.

What can you do if the bass or stereo positioning sounds unreliable after setup?

First, check the monitors’ symmetry, height and angle, and try moving the monitors or your listening position if needed. Then use the settings on the exact model; Genelec also describes measurements at the listening position as part of the adjustment process.

How can you assess your warranty if a monitor breaks down too soon?

For a consumer purchase in the Netherlands, statutory consumer rights apply alongside any manufacturer’s or retailer’s warranty. According to ACM ConsuWijzer, the retailer is responsible for providing a solution if the product doesn’t meet reasonable expectations under normal use; the length of a manufacturer’s warranty doesn’t determine those statutory rights on its own.

Can you mix loudly in a home office without any restrictions?

No. Buying studio monitors doesn’t mean that every sound level is permitted. For noise nuisance from neighbours, the Dutch government recommends first trying to agree on a solution together, and then suggests contacts such as your landlord, the local council or the owners’ association. The applicable noise limit depends on local rules and individual circumstances.