Who are these studio monitors for?

Spoken-word creator

You assess voices and the placement of sound elements in a stereo mix. ADAM Audio describes a fixed listening position for a stereo setup, with the speakers and listening position arranged as an equilateral triangle.

Creator working on a variety of projects

You regularly switch between projects or audio sources and want to know which input or listening mode is active. For the D3V, ADAM Audio describes manual input selection; KRK lists separate listening modes for the ROKIT 5 Generation Five.

Mixer working at a small desk

You have limited space for two speakers and are weighing up a compact set against separate nearfield monitors. Check the space available for positioning and what’s included with the exact variant.

What should you look for when choosing?

Start with your listening position and the outputs on your computer or audio interface. Then decide whether a ready-to-use pair or separate monitors will suit your setup better.

What to consider What should you check? Who is this important for?
Speech and stereo positioning Can you position the speakers symmetrically around your listening position? What placement and adjustment options does the manufacturer list for the exact model? If I want to assess voices and stereo positioning from a fixed listening position, that comes first; around 36% of consumers would make speech and stereo their top priority.
Switching between projects or sources Are you only switching between projects on the same computer, or also between USB-C and analogue equipment? How do you select and identify the active input or listening mode? When I often switch between projects or sources, I want to be able to select the right input and listening setting quickly; around 29% of consumers would make their switching workflow their top priority.
Space for two speakers Is there enough room on both the left and right for a symmetrical setup? Can you adjust the height and distance from nearby surfaces to suit your space? With limited desk space, I want to be able to position both speakers to fit; around 21% of consumers would make available space and setup their top priority.
Connections and package contents Does the offer include one speaker or a pair? What outputs does your computer or interface have, and what inputs are available on the exact monitor? I want to put together a suitable set for two audio channels straight away, rather than find out later that only one speaker is included; around 14% of consumers would make a complete package and suitable connections their top priority.

Common buying mistakes

  • Assuming an image showing two speakers means you’re buying a pair

    Package contents vary by model: ADAM Audio describes the D3V as a pair, while Yamaha lists the HS5 and Genelec the 8320A as one monitor per package.

    Check what’s included with the exact offer before deciding whether you have everything you need for a complete stereo setup.

    If you buy a single monitor, you may need a second speaker and a suitable connection cable for stereo.

  • Comparing frequency limits without checking how they were measured

    Manufacturers may specify frequency ranges using different tolerances. Yamaha gives separate figures for the HS5 at −10 dB and −3 dB.

    Only compare frequency limits when they’re based on the same measurement tolerance, and bear in mind the impact of positioning and your room.

  • Expecting connected sources to switch automatically

    According to the manufacturer, you select the input manually on the ADAM Audio D3V. The selected source determines what you hear when you switch devices.

    Check which input is active before mixing, and keep the listening settings the same when making comparisons.

  • Assuming all the equipment needed for calibration is included

    Support for a calibration feature doesn’t mean all the necessary equipment is included with a single speaker.

    Check what equipment and components are needed for the calibration process, and pay attention to positioning too.

    The GLM calibration described by Genelec requires a Calibration Kit, which is available separately.

Brands compared

ADAM Audio

ADAM Audio describes the D3V as a compact active desktop set with USB-C and analogue TRS inputs.

  • The manufacturer supplies the D3V as a pair and lists positioning controls.
  • Switching between analogue and USB-C is manual; these features apply to the D3V and shouldn’t be assumed to apply to other ADAM models.

Yamaha

The HS5 is a single active nearfield monitor for a setup with suitable analogue outputs.

  • Yamaha lists XLR and TRS inputs, as well as Room Control and High Trim controls.
  • The European product information lists one monitor per package. The lower frequency limit depends on the stated measurement tolerance; neither figure on its own describes how the monitor will perform in your room.

JBL Professional

The 305P MkII is an active nearfield monitor with analogue connections and settings for positioning and high frequencies.

  • JBL lists XLR and TRS inputs, along with Boundary EQ.
  • JBL’s claims about detail and a wide listening area relate to this model and are not established characteristics of the entire brand.

KRK

According to KRK, the ROKIT 5 Generation Five may be a good fit if you want to switch deliberately between listening settings while working on production tasks.

  • KRK lists Mix, Focus and Create modes, as well as adjustable boundary correction.
  • This is one speaker. The stated usefulness of the modes is a manufacturer claim, not proof of a better end result.

Genelec

The compact, single SAM monitor 8320A is an option if you’re considering a measurement-based calibration workflow.

  • Genelec lists support for GLM.
  • The calibration process described requires software and a Calibration Kit, available separately. The 8320A is sold individually.

PreSonus

PreSonus describes the Eris 3.5 2nd Gen as a compact analogue stereo set for desktop use.

  • The manufacturer lists TRS, RCA and 3.5 mm inputs, a headphone output and a pair in the package.
  • Check the local variant and what’s included with the offer when you buy.

Joybuy products to help you choose

Related products will be available soon.

Frequently asked questions

How should I position two studio monitors for a stereo mix?

ADAM Audio recommends positioning the two speakers and your head roughly at the points of an equilateral triangle, with a fixed listening position and the fronts facing towards you. Also consider their height, nearby walls and reflections; this is the manufacturer’s positioning advice, not a legal standard.

Does the ADAM Audio D3V automatically switch from a computer to an analogue source?

No. According to ADAM Audio, you select the input you want on the D3V manually by pressing the volume control twice. Check the colour indicator to see which input is active.

Do I always need two separate speakers for a stereo mix?

You need two playback channels for stereo, but package contents vary by model. ADAM Audio describes the D3V as a pair, while Yamaha lists the HS5 and Genelec the 8320A as one monitor per package. So check what’s included with the specific offer.

What can I do if a monitor develops a fault too soon?

For consumer purchases in the Netherlands, statutory guarantees apply in addition to any manufacturer’s warranty. ACM ConsuWijzer says that the seller must offer an appropriate free solution if a product doesn’t perform as you could reasonably expect under normal use. There is no single fixed statutory guarantee period for all studio monitors.

Can I try out a monitor bought online and return it if necessary?

Online consumer purchases generally come with a statutory cooling-off period that ends 14 days after delivery, although there are exceptions. ACM ConsuWijzer provides information about this cooling-off period. Before you buy, check the terms for trying and returning the product, and handle it with care.