Creator recording and monitoring at the same time
You want to record spoken introductions without the monitor signal reaching the microphone. So pay attention to how well the headphones seal and whether they connect to your recording equipment.
Choose closed-back, wired headphones if you’re recording at the same time, working with background noise or want to limit sound leaking into a microphone. If you’re only editing in a quiet room, an open-back model is also worth comparing. Test playback with your own recordings, and check the fit and connections. Headphones can’t remove reflections from a recording that’s already been made.
You want to record spoken introductions without the monitor signal reaching the microphone. So pay attention to how well the headphones seal and whether they connect to your recording equipment.
You listen back to recordings repeatedly to assess speech and transitions. Compare your own clips using the same source and at the same comfortable volume.
For long editing sessions, fit and ear pad care matter too. Audio-Technica warns that excessive exposure to UV and heat can shorten the lifespan of ear pad materials.
Choose this option: if you’re recording at the same time or want to limit background noise.
Bear in mind: how well the headphones seal also depends on the fit. Check that the cable works for your desk setup, too.
Choose this option: if you only edit in a quiet room and aren’t using an active microphone.
Bear in mind: an open-back design doesn’t offer the same isolation from background noise or prevent sound leaking into a microphone.
| What to consider | What should you check? | Who should pay particular attention? |
|---|---|---|
| Isolation and sound leakage | Check that the ear pads fit around your ears, and test them with your own microphone setup. | If I’m recording at the same time or working in a shared space, I want as little of the monitor signal as possible to leak into the microphone. That’s why around 36% of consumers prioritise isolation. |
| Speech reproduction | Compare familiar voice recordings using the same source and at the same comfortable volume. | When I’m editing spoken clips, I want to be able to assess the differences between takes clearly. Around 29% of consumers prioritise evaluating speech. |
| Fit and ear pads | Try the headphones for longer than a short clip, and check whether the ear pads are replaceable on the model you’re considering. | For long editing sessions, I want a fit that feels comfortable to me and ear pads I can maintain. Around 21% of consumers prioritise long-lasting comfort. |
| Cable, connection and care | Check the plug and any adapter against your output, and check the cable routing and exact model variant. | If I’m connecting my headphones to a specific computer, recorder or interface, I want to know in advance which cable and version will work. Around 14% of consumers prioritise connections and care. |
A closed-back design won’t limit sound leakage to the same extent for everyone, as fit varies. If the ear pads don’t fit properly, the intended benefit may be reduced.
Try the model and test it with your own voice recordings and microphone setup.
If a reflection gets into the signal while you’re recording, listening back later with different headphones won’t remove it. Beyerdynamic lists windows as hard surfaces that can reflect sound.
Check your recording space and make a test recording before blaming the headphones.
Cables and connections vary between versions. The DT 770 PRO is available in 32, 80 and 250 ohm variants, which beyerdynamic matches to different playback sources.
Check the cable routing, plug and exact version before you order.
Audio-Technica says that excessive exposure to UV and heat can shorten the lifespan of ear pad materials.
Store the headphones out of direct sunlight and check whether suitable replacement ear pads are available for your model.
The closed-back, wired ATH-M40x is one option to compare for editing speech and monitoring.
The closed-back HD 280 PRO is worth comparing if isolation and replaceable ear pads are important to you.
RØDE positions the NTH-100 for uses including audio editing and podcasting.
The closed-back DT 770 PRO comes in different impedance variants for a range of playback sources.
The open-back MDR-MV1 is an alternative to compare if you edit in a quiet room without an active microphone.
These Joybuy product picks are headphones and headsets for listening to audio. Check whether each model’s connection and features suit the way you edit speech; product titles alone don’t confirm that a model is suitable for studio monitoring.
No image available
The product information mentions ANC and listening via a 3.5mm audio cable. Check that the wired connection is compatible with your recording equipment.
The product title states a battery life of 60 hours.
No image available
The product information associates this model with listening to background sound and wireless use. Check that its connection options are compatible with your editing equipment.
No image available
The product information mentions ANC and a wireless connection to two devices. Check that the USB-A version suits your setup.
No image available
The product information mentions a USB-A Bluetooth adapter and memory foam ear cushions. Check that the mono version suits your listening and editing work.
No image available
The product information mentions a wired 3.5mm connection and an included USB controller. Check which connection works with your computer or interface.
Not if the echo is already in the recording. Beyerdynamic lists windows as hard surfaces that reflect sound, so assess the recording and the acoustics of your recording space too. This advice is about the room, not a feature of the headphones.
Check the headphone output on your computer, recorder or interface, and the plug supplied with the exact version. For example, Sennheiser describes the HD 280 PRO as having a 3.5mm plug and a 6.3mm adapter. For the DT 770 PRO, beyerdynamic offers impedance variants for different sources.
Audio-Technica recommends wiping the ear pads with a dry cloth after use and avoiding prolonged exposure to UV and heat. According to its advice, let damp parts dry in the shade and check which replacement parts are suitable for your model.
According to the Dutch government, online consumer purchases often come with a 14-day cooling-off period, although exceptions apply. In the Netherlands, there is no fixed statutory guarantee period: you’re entitled to a product that meets what you could reasonably expect. If there’s a fault, contact the seller.
The World Health Organization (WHO) recommends keeping the volume and listening time down and taking breaks. The WHO’s example of 80 dB for up to 40 hours a week relates to listening exposure; it isn’t a guaranteed safe volume setting for every computer or interface.