Voice editor in a quiet room
You mainly edit existing spoken intros and don’t need to protect a microphone or another person from sound leakage while listening back. That means you can compare open-back models too.
If you’re only editing existing voice recordings in a quiet room, open-back headphones could be an option. If you also record while monitoring from the same workstation, compare closed-back models first, as sound could leak into the microphone. Then check the fit, connection and cable, and listen to your final mix on another system too: the design alone doesn’t prove that the headphones will reproduce your voice mix accurately.
You mainly edit existing spoken intros and don’t need to protect a microphone or another person from sound leakage while listening back. That means you can compare open-back models too.
You record at the same workstation and want to stop playback from leaking into your microphone. In that case, closed-back headphones are a sensible design to compare.
You listen to short voice passages repeatedly, so pay particular attention to the fit, cable routing and replaceable parts of the exact model.
Best for: mainly editing existing intros in a quiet room, without an active microphone while you listen back.
Bear in mind: sound can leak out and reach a microphone. Sound On Sound describes this as something to consider with open-back headphones.
Best for: recording voiceovers or monitoring while playing audio at the same workstation, or keeping more sound from escaping into the room.
Bear in mind: how well they seal also depends on the fit; closed-back doesn’t automatically mean the sound is neutral.
Best for: comparing a specific semi-open model for playback and editing, when some sound leakage is acceptable.
Bear in mind: the semi-open label doesn’t guarantee a particular level of isolation or sound; test for microphone leakage separately.
| What to consider | What to look for | Who should pay extra attention? |
|---|---|---|
| Assessing speech | Compare open-back and closed-back models for your working environment. Listen to your final mix on a second playback system too. | If I mainly edit existing intros, I don’t want to base my decisions on just one pair of headphones; around 36% of consumers put assessing speech first. |
| Microphone leakage | Compare a closed-back model and test it with your own microphone and playback volume. | If I record while monitoring, I want to stop playback from ending up in the recording; around 29% of consumers make sound leakage their top priority. |
| Fit | If possible, check the fit while wearing your own glasses and see whether replacement ear pads are available for the exact model. | When listening repeatedly, I want my headphones to stay comfortable throughout my sessions; around 21% of consumers give comfort top priority. |
| Connection and cable | Check the plug, whether the cable reaches your connection point and whether it’s detachable. | If the cable routing or connection affects my workstation, I want to know what will work with my setup; around 14% of consumers start by considering the connection, cable routing or maintenance. |
Even in a quiet room, playback can reach a microphone if you’re recording while listening.
First decide whether you’ll only be editing or whether you’ll also be recording voiceovers. If you’re recording at the same time, test for leakage with your own setup.
A claim of flat or accurate reproduction doesn’t automatically tell you how the model will fit you or how your mix will sound on other playback systems.
Compare the exact models and listen to a finished version on a second system too.
The beyerdynamic DT 770 PRO is available with different impedance ratings; models can also vary in their cable and plug.
Check the full specification and compare it with the output on your computer or audio interface, as well as the distance to your workstation.
An unsuitable cable route or connection could mean you need a different connection or additional equipment.
The wired, closed-back ATH-M40x is a model to compare if you both record and edit.
The open-back DT 900 PRO X is a model to compare for critical listening; the closed-back DT 700 PRO X and DT 770 PRO are alternatives if you also record.
The open-back HD 490 PRO is a model to compare for editing without microphone leakage; the closed-back HD 280 PRO offers another option for monitoring or recording voiceovers.
The semi-open K240 Studio is a model to compare for playback and mixing.
The MDR-7506 is a wired option to compare for studio and recording use.
A Joybuy pick for listening back to spoken intros, with both wireless and wired listening options described.
No image available
An option if you want to listen wirelessly and also have a wired listening option; if you’re recording at the same time, test whether playback reaches your microphone.
The product name lists noise cancelling, 60-hour battery life, fast charging and 4 microphones.
The product information also describes wired listening via a 3.5mm audio cable and adjustable EQ settings.
You can, but when you play audio during a recording, sound from open-back headphones may reach the microphone. Check this with your own setup; otherwise, compare a suitable closed-back model first.
Not simply because they’re studio headphones. Check the impedance of the exact version and the headphone output you’re using. For example, the beyerdynamic DT 770 PRO is available with different impedance ratings; which combination will be sufficient depends on your source and preferred listening volume.
Follow the care instructions for the exact model and check whether suitable ear pads are available. Sennheiser lists replaceable ear pads for the HD 280 PRO and replaceable, washable pads for the HD 490 PRO. Keep the volume down and take breaks: the World Health Organization points out that both sound level and listening time affect the risk of hearing damage.
According to ACM ConsuWijzer, online purchases generally come with a 14-day cooling-off period after delivery; check which conditions and exceptions apply to your purchase. If a product doesn’t meet what you could reasonably expect under normal use, the seller is responsible for the statutory guarantee. A manufacturer’s guarantee doesn’t replace this right.