Who is this for?

Mixer at a shared desk

You want to work on your jazz demo during office hours without your colleagues clearly hearing your music or you having to turn it up to drown out background noise.

Detail-focused jazz mixer

You want to assess quiet passages, the balance between instruments and stereo placement. If possible, use a quiet spot for a second listening session.

Creator with long sessions

You wear your headphones for extended periods and want to check the fit, connection and availability of suitable replacement parts in advance.

What should you look for?

Closed-back headphones

When: if you mix during office hours and want to be considerate of colleagues; manufacturers recommend models such as the ATH-M40x and DT 700 PRO X for studio use and mixing.

Keep in mind: how much sound is blocked also depends on the fit, and closed-back headphones don’t guarantee complete isolation or the right mix balance.

Open-back headphones

When: for a dedicated listening session in a quiet spot; the HD 490 PRO and DT 900 PRO X are open-back models that their manufacturers recommend for mixing.

Keep in mind: according to the beyerdynamic Help Center, you’ll hear ambient noise, and people nearby may hear sound from your headphones.

When mixing a jazz demo at a shared desk, your choice will mainly depend on your working environment, mixing goals and fit. The percentages below indicate which priorities may matter most to consumers in this situation.

Consideration What should you check? Who is this important for?
Isolation and colleagues Try the earcups on, including with glasses if you wear them. Check whether you can hear your music at a normal listening level without someone nearby hearing it. If you work at a shared desk, you’ll want to avoid disturbing colleagues or turning the volume up to drown out office noise. Around 36% of consumers say isolation and consideration for colleagues are their top priorities.
Balance and stereo placement Compare familiar passages at the same comfortable volume, and listen to your mix on another playback system too. If you want to assess quiet passages and the position of instruments, the mix itself is your most important test. Around 29% of consumers put assessing the jazz mix first.
Comfort Try the headphones for a representative session and pay attention to the ear cushions, headband and any pressure caused by glasses. For longer work sessions, you’ll want to keep working without the fit becoming uncomfortable. Around 21% of consumers say long-term comfort is their top priority.
Connection and maintenance Check your device’s output, the plug and any adapter you may need. Compare the full model number before ordering replacement cables or ear cushions. If you want to connect headphones to your own audio equipment and replace parts later, compatibility is key. Around 14% of consumers put connection and maintenance first.

Buying pitfalls

  • Choosing an open-back model just because it’s marketed for mixing

    According to the beyerdynamic Help Center, an open-back design lets in ambient noise and allows sound to reach people nearby. That can be inconvenient at a busy desk.

    Do you have a quiet place for critical listening? If not, compare a closed-back model and check the fit for yourself.

  • Taking claims of a ‘flat’ or ‘uncoloured’ sound as proof of a fair comparison

    Sound claims on manufacturers’ websites aren’t measurements of all the models mentioned under the same conditions.

    Use these descriptions as a guide when choosing, listen to familiar jazz passages and check your mix on another playback system.

  • Ordering replacement parts without checking the model number

    Audio-Technica states that the replacement cable for the ATH-M40x isn’t suitable for the ATH-M50xBT variants. ATH-M40x ear cushions are sold individually.

    Compare the full model number with the part description. For ear cushions, check whether you need one or a pair.

Brands to consider

beyerdynamic

The manufacturer positions the closed-back DT 700 PRO X for recording, monitoring and mixing; the open-back DT 900 PRO X is designed for a quiet mixing environment.

  • For the DT 700 PRO X, beyerdynamic lists an impedance of 48 ohms, a detachable cable and replaceable parts, including ear cushions and the headband.
  • The open-back design of the DT 900 PRO X lets sound through. The manufacturer’s claims about precision aren’t independent comparative measurements.

Audio-Technica

Audio-Technica recommends the closed-back ATH-M40x for tracking, mixing and monitoring at a shared desk.

  • The manufacturer describes the ATH-M40x as closed-back and tuned for a flat response; this isn’t an independent frequency measurement.
  • Audio-Technica lists a replacement cable for the ATH-M40x. M40x ear cushions are sold separately; check model compatibility.

Sennheiser

The closed-back HD 480 PRO is an option for a shared space, while the open-back HD 490 PRO is suited to a quiet listening spot.

  • Sennheiser lists a detachable cable and a closed-back design for the HD 480 PRO. For the HD 490 PRO, the manufacturer offers two types of ear cushions.
  • Sennheiser’s claims about accuracy, isolation and comfort are manufacturer claims, not a guarantee of your fit or listening experience.

AKG

The closed-back, foldable K371 is worth comparing if you’re looking for portable studio headphones.

  • AKG highlights sealing ear cushions and a response tuned to a reference target.
  • These are the manufacturer’s descriptions, not the result of a comparison test against other models.

Sony

Sony recommends the MDR-7506 for recording and studio use; you can try this closed-back model alongside other options.

  • Sony lists a 3 m cable and a design weight of 230 g.
  • These specifications don’t show that its isolation or sound is better for mixing than that of other models.

Headphones at Joybuy

These headphones at Joybuy are relevant to the topic. Check each model to make sure its connection and performance suit your mixing setup.

Sennheiser MOMENTUM 4 Wireless, Black

Sennheiser MOMENTUM 4 Wireless, Black

The listed 3.5 mm audio cable allows wired listening; check that the connection works with your audio equipment.

The product description mentions active noise cancellation and adjustable EQ.

View at Joybuy
Acer OHR559 OWS Wireless Headphones

Acer OHR559 OWS Wireless Headphones

This wireless model is designed for music and gaming; check that its performance suits your mixing setup.

The product title lists Bluetooth 5.3, a foldable design and a USB-C charging port.

View at Joybuy
Bose QuietComfort Ultra Bluetooth Headphones, Black

Bose QuietComfort Ultra Bluetooth Headphones, Black

The description mentions an audio cable for wired listening; check that the connection is suitable for your source.

The product specifications list a closed-back design and active noise cancellation.

View at Joybuy
Sony WH-1000XM5 Wireless Headphones, Silver

Sony WH-1000XM5 Wireless Headphones, Silver

The supplied 3.5 mm audio cable may suit a source with that output; check the connections on your own equipment.

The specifications list Bluetooth, a closed-back design and active noise cancellation.

View at Joybuy
Jabra Evolve2 75 Headset

Jabra Evolve2 75 Headset

The description mentions active noise cancellation and a wired USB-C connection; check that it works with your equipment.

The product specifications list Bluetooth 5.2 and an adjustable headband with padded ear cushions.

View at Joybuy

Frequently asked questions

Can you mix with open-back headphones while colleagues are sitting next to you?

It depends on the space and how much sound your colleagues can hear. According to beyerdynamic, an open-back design lets in ambient noise and can be heard by people nearby, so it’s best to use one in a quiet spot if sound leakage could be disruptive at your desk.

Do you need software or a separate amplifier for wired studio headphones?

At the very least, check that your device’s output is compatible with the headphone plug or adapter. beyerdynamic lists a 3.5 mm plug and a 6.35 mm adapter for the DT 700 PRO X. Whether your particular source provides enough volume depends on the source itself.

How can you keep your headphones usable when the cable or cushions wear out?

Check the full model number before ordering parts. Audio-Technica lists a replacement cable for models including the ATH-M40x, and sells M40x ear cushions individually. For the DT 700 PRO X, beyerdynamic lists replaceable parts including cables and ear cushions.

How can you avoid turning up the volume to drown out office noise?

Start with headphones that fit well, and keep an eye on the volume and how long you listen for. The World Health Organization recommends keeping the volume low and taking regular listening breaks; both sound level and exposure time matter.

What workplace noise rules apply in the Netherlands?

According to Arboportaal, employers must provide hearing protection when daily exposure exceeds 80 dB(A). Above 85 dB(A), employees must wear it and employers must take measures. These requirements are based on actual daily exposure; without a measurement, you can’t determine whether they apply to your workplace. Ordinary studio headphones aren’t automatically certified hearing protection.