Who is this choice for?

Producer working alongside colleagues

You mix at a desk where conversations can be distracting and sound from your headphones may reach others. Pay attention to the seal and listen at a comfortable volume; VeiligheidNL points out that a good fit helps reduce sound leakage.

Producer putting the finishing touches to a mix

You mainly want to assess the kick, bass and balance between the elements in your mix. A separate, quiet room can provide space for critical listening with an open-back model, as long as you bear sound leakage in mind.

Producer working long sessions

As well as suitability for mixing, consider the fit, cable and maintenance. Check that the headphones are comfortable and find out which parts can be replaced on the specific version.

What should you look for?

In a shared office, isolation matters, but it cannot replace checking the mix balance. Assess the fit, listening habits and connection separately.

What to consider What should you check? Who is this most important for?
Isolation and sound leakage Compare the fit and seal using a quiet passage at a comfortable volume; check that the ear pads make a good seal. When I mix alongside colleagues, I want to be able to follow conversations without turning up my track or unnecessarily disturbing others. Around 36% of consumers prioritise limiting sound leakage and distractions.
Sound balance Compare a familiar reference track with your own mix using the same source and a comfortable volume. When working on an electronic mix, I want to be able to assess the kick, bass and other elements in relation to one another, possibly in a separate, quiet room. Around 29% of consumers prioritise assessing the mix balance.
Comfort Assess the pressure from the headband and ear pads during a typical session; try the fit with glasses too, if relevant. For longer sessions, I want the headphones to remain comfortable and be suitable for repeated mixing work. Around 21% of consumers put comfort and maintenance first.
Connection and cable Compare the plug and any adapter with the output on your computer or audio interface; check the cable length and replacement parts for the exact version. If the headphones need to connect to my equipment and I want to be able to deal with cable wear, I check the connection and parts for each version. Around 14% of consumers prioritise the connection, cable and maintenance.

Common pitfalls when choosing studio headphones

  • Choosing an open-back model without considering sound leakage

    An open-back design lets sound in and out. This can be distracting in a shared office, and your colleagues may hear your track.

    If you choose an open-back model, it’s best suited to a separate, quiet listening space. For a shared desk, compare a well-fitting closed-back model first.

  • Treating a manufacturer’s claim about accurate bass as proof of mixing performance

    A product description doesn’t tell you what balance you’ll hear with your source and the way the headphones fit.

    Compare a familiar reference track with your own mix at the same comfortable volume. Keep manufacturer claims separate from independent reviews.

  • Overlooking the connection and wear-and-tear parts

    The supplied cables and replaceable parts vary by model and version.

    Before buying, check the plug, the adapter you need and which compatible parts are available for that version.

Brands to consider

beyerdynamic

According to beyerdynamic, the closed-back DT 700 PRO X is designed for uses including monitoring and mixing. Its detachable cable may also be useful when working at a desk.

  • beyerdynamic specifies a closed-back design, 48 ohms, cables included and a 3.5 mm plug with a 6.35 mm adapter for the DT 700 PRO X.
  • The manufacturer says the open-back DT 900 PRO X is better suited to critical mixing. This is the manufacturer’s guidance, not an independent comparison of all models.

Sennheiser

Sennheiser lists the closed-back HD 480 PRO for uses including mixing and mobile studio work; the open-back HD 490 PRO is a separate option for a quiet room.

  • Sennheiser lists a detachable cable and passive isolation for the HD 480 PRO.
  • The open-back HD 490 PRO lets sound in and out by design. You’ll need to assess the fit and isolation of a closed-back model for yourself.

AKG

The closed-back, foldable K371 is a model worth comparing if you’re looking for headphones for mixing and editing.

  • AKG describes the K371 as a closed-back, over-ear model and explains its own acoustic tuning.
  • Claims about neutral sound and comfort come from the manufacturer; check the sound and seal for yourself.

Audio-Technica

The closed-back ATH-M50x is a wired option with a foldable design and detachable cables.

  • Audio-Technica lists swivelling ear cups and three cables included with the ATH-M50x.
  • The manufacturer describes the bass response as deep. Don’t assume from this alone that the model will reproduce your bass balance most accurately; compare it for yourself.

Sony

The MDR-7506 is a model that Sony lists for recording and studio use.

  • Sony Netherlands lists a 3 m cable and a weight of 230 g for the MDR7506.EU.
  • These specifications alone don’t tell you how much the headphones will reduce conversations in your office or how they compare with other models.

Joybuy products for this topic

Here’s a wireless over-ear pair of headphones to compare with the requirements for studio headphones for mixing in a shared office.

Sennheiser MOMENTUM 4 Wireless, Black

Sennheiser MOMENTUM 4 Wireless, Black

This model is worth comparing if a wireless design suits the way you work. Check the sound balance and connection for yourself before choosing it for mixing.

  • Wireless over-ear headphones with noise cancelling.
  • Battery life: 60 hours; with fast charging.
  • 4 microphones.
  • Colour: Black.
View at Joybuy

Frequently asked questions

Are open-back studio headphones suitable for a shared desk?

Usually not as your only pair of headphones when colleagues are nearby: an open-back design lets sound in and out. RTINGS describes open-back models as suitable for critical mixing, but they’re best suited to a separate, quiet listening space.

How do you connect wired studio headphones?

Compare the output on your computer or audio interface with the plug and any adapter supplied with the exact version. beyerdynamic specifies a 3.5 mm plug and a 6.35 mm adapter for the DT 700 PRO X; check the connection for other models separately.

Should I turn up the volume to drown out conversations?

No. It’s better to choose a fit that helps reduce background noise and assess the seal at a comfortable volume. VeiligheidNL recommends well-fitting headphones, so background noise is less likely to make you turn the volume up.

What can I do after buying online from a Dutch retailer if the fit isn’t right or the product is faulty?

For eligible distance purchases from a business, you generally have 14 days to change your mind, according to the Dutch government. Separately, you’re entitled to a product that is fit for purpose; the Dutch government states that Dutch statutory guarantee law has no fixed time limit. Check the terms of your specific purchase, including any exceptions to the cooling-off period.