Who is this relevant to?

Producer who mixes in a quiet space

If you mainly mix in a quiet room, you can compare an open-back model. RTINGS.com describes open-back headphones as an option for mixing and mastering, but also notes that they leak sound. So check your mix on other systems too.

Producer working in a shared space

If other people are around or you also record, isolation and sound leakage may matter more. Try the fit of the ear cups on your head; the design alone doesn’t tell you how well a particular model seals.

Producer who often changes desk height

If you switch between sitting and standing, consider the fit, connection and cable routing in both working positions. Make sure the cable doesn’t pull or run along the edge of the desk.

What should you look for?

Choose the design to suit your workspace, then consider the fit, connection and cable routing for your standing desk.

Open-back, wired over-ear

Choose this if: you mainly mix in a quiet space and sound leakage isn’t an issue.

Bear in mind: there’s less isolation and sound leaks out; it’s still worth checking your mix on other systems.

Closed-back, wired over-ear

Choose this if: conversations in the room or microphone recording make isolation important.

Bear in mind: the seal and comfort depend in part on how the headphones fit your head.

Semi-open, wired over-ear

Choose this if: you specifically want to try this design and don’t need complete isolation.

Bear in mind: the term semi-open doesn’t, by itself, tell you anything about isolation or mixing accuracy; assess leakage and fit in your own space.

Consideration What to look for when buying Who is this important for?
Assessing kick and bass Listen to familiar passages and, if possible, compare them on a second playback system too. If I want to check my decisions about kick and bass, I compare familiar tracks and listen to my mix elsewhere too. Around 33% of consumers prioritise assessing kick, bass and how well a mix translates.
Isolation and leakage Try the ear cups in your working environment and check whether someone nearby can hear the sound. If other people are working in the room or I’m recording with a microphone, I want to know how much ambient noise gets in and how much sound leaks out. Around 27% of consumers prioritise isolation and sound leakage.
Cable and connection Check the output, plug size and cable length supplied; consider the cable route when sitting and standing. If I regularly change position, I want a suitable connection and a cable that won’t catch on anything. Around 20% of consumers prioritise cable routing and connection.
Comfort during long sessions Try the fit for longer than a short listen and check for pressure around your ears and headband, including when wearing glasses. If I spend a long time working on the same mix, I want my headphones to remain comfortable. Around 20% of consumers prioritise comfort during longer sessions.

Common buying mistakes

  • Assuming a spacious sound will automatically make your mix translate well

    Headphones and speakers reproduce channels and low frequencies differently. So what you hear on one pair of headphones alone won’t tell you how the mix will sound elsewhere.

    Compare your mix with familiar tracks and, where possible, listen to it on speakers or other playback systems too.

  • Choosing a closed-back model without trying the fit

    The design doesn’t determine how well the ear cups seal around your ears. A poor fit can also become uncomfortable while listening.

    Try the model in your working environment and check for pressure, ambient noise and audible leakage.

  • Looking only at cable length

    A cable that sits neatly when you’re seated may pull or run along the desk when you stand or turn.

    Check the connection and cables supplied with the exact version, and look at the cable route in both working positions.

    Depending on your setup, you may need a different suitable cable or adapter; check before buying accessories.

  • Treating impedance variants as the same product

    According to the manufacturer, the beyerdynamic DT 770 PRO is available in 32-, 80- and 250-ohm versions. Don’t assume these variants place the same demands on your audio output.

    Check the full model variant and whether your own output provides the listening volume you want.

Brands to consider

Sennheiser

The HD 560S is an open-back, wired option to compare if you mix in a quiet space. This doesn’t apply to every pair of headphones from the brand.

  • Sennheiser lists a detachable cable and an impedance of 120 ohms for the HD 560S.
  • Manufacturer claims about sound and bass aren’t an independent guarantee of how well your mix will translate. Check that your audio output provides the listening level you want.

beyerdynamic

The open-back DT 900 PRO X and closed-back DT 770 PRO offer two different options: for mixing in a quiet space and for working when you need isolation, respectively.

  • According to beyerdynamic, the DT 900 PRO X has a detachable cable and an impedance of 48 ohms. The DT 770 PRO is listed in 32-, 80- and 250-ohm versions.
  • Don’t confuse the closed-back DT 770 PRO with the open-back DT 900 PRO X, or assume the impedance variants have the same connection requirements.

Audio-Technica

The closed-back ATH-M50x is worth considering if detachable cables and storage are important to you.

  • Audio-Technica lists three detachable cables and folding ear cups for the ATH-M50x.
  • The brand’s claims about sound and suitability for mixing don’t independently prove that the bass balance is right for your mix.

Sony

The closed-back MDR-M1 is worth considering for a shared workspace or a mix of mixing and recording.

  • Sony Netherlands lists two detachable cables and replaceable ear pads for the MDR-M1.
  • Assess the manufacturer’s claims about sound reproduction and isolation for yourself, based on your fit and mixing needs.

AKG

The open-back K702 is another option to compare for a quiet space, especially if a replaceable cable matters to you.

  • AKG lists a 3 m detachable cable, an impedance of 62 ohms and replaceable ear pads for the K702.
  • The manufacturer’s claims about accuracy don’t prove that this model offers an advantage for your electronic track.

Joybuy product picks

This selection includes headphones and a headset for use at a desk. Check the connection and wired options for each model; a wired connection alone doesn’t prove that the sound is suitable for assessing a mix.

Sennheiser MOMENTUM 4 Wireless, black

Sennheiser MOMENTUM 4 Wireless, black

Could suit anyone who wants to listen via a wired connection during a session; the product description lists a 3.5mm audio cable and passive listening without a battery.

The product description mentions adaptive noise cancelling and 60 hours of battery life in the product name.

View at Joybuy
Bose QuietComfort Ultra Bluetooth Headphones, black

Bose QuietComfort Ultra Bluetooth Headphones, black

If you want to reduce ambient noise while working, the product description lists a closed-back over-ear design and active noise cancelling.

The product description mentions an audio cable for listening without a battery. Check that the connection is compatible with your source.

View at Joybuy
Bose QuietComfort Headphones, Sandstone

Bose QuietComfort Headphones, Sandstone

If ambient noise is a concern, the product description lists active noise cancelling and a transparency mode.

The product name mentions Bluetooth. Before using them with your mixing setup, check that the wired connection you need is available.

View at Joybuy
Bose QuietComfort Ultra Headphones, 2nd generation, black

Bose QuietComfort Ultra Headphones (2nd Gen), black

Could suit anyone who needs a detachable cable; the product description lists a cable with a 3.5mm connection.

The product description also mentions active noise cancelling. Check the connection and fit for your own setup.

View at Joybuy
EPOS | SENNHEISER IMPACT SC 230 USB MS II Wired OE Headset, black

EPOS | SENNHEISER IMPACT SC 230 USB MS II Wired OE Headset, black

The product description lists a wired USB connection and a 2.9 m cable for desk use.

This is a single-sided headset, so it’s less suitable for assessing stereo imaging while mixing.

View at Joybuy

Frequently asked questions

Can I mix kick and sub-bass using headphones alone?

Use headphones to assess detail, but compare familiar tracks and, if possible, check your mix on speakers or other playback systems too. Sonarworks points out that headphones and speakers have different characteristics and limitations; a stated frequency range doesn’t prove that a mix will translate well.

How do I connect studio headphones to my standing desk setup?

First check the output on your audio interface or other source, then check the plug and any adapter supplied with the exact version. Leave enough slack in the cable for sitting and standing, without pulling on it. According to beyerdynamic, the DT 900 PRO X comes with a 3.5mm plug and a 6.35mm adapter, among other accessories.

How can I avoid listening too loudly during a long mixing session?

Keep the volume down and take regular listening breaks. The World Health Organization gives an average of 80 dB for up to 40 hours a week as an example of safe listening, and four hours a week at 90 dB. This is health advice, not a Dutch legal volume limit, and it doesn’t prove that a particular volume setting on your equipment corresponds to a specific dB level.

Am I always entitled to exactly two years’ warranty on headphones bought online in the Netherlands?

No. According to ACM ConsuWijzer, the legal guarantee applies when a product doesn’t deliver what you could reasonably expect under normal use; the seller is responsible. A separate manufacturer’s or seller’s warranty doesn’t replace this right.

Can I return headphones bought online in the Netherlands within 14 days?

Online purchases generally come with a statutory cooling-off period of up to 14 days after delivery. ACM ConsuWijzer lists exceptions, including certain hygiene products once their packaging has been opened. So don’t assume the same return outcome applies to every pair of headphones or packaging situation; check the seller’s information before buying.