Who is this relevant to?

Home mixer in a quiet room

You’re mainly focused on balance and placement in the mix. Open-back, wired headphones may suit you if you listen in a quiet room; beyerdynamic and Sennheiser position their open-back models for critical listening and mixing.

Mixer who also records

You sometimes use a microphone or don’t always work in silence. Focusrite says closed-back headphones can help limit the sound reaching the microphone.

Creator with few spare sockets

You want to listen through your existing computer, mixer or audio interface. So check the connections and power requirements of that source; Focusrite explains that a fourth-generation Scarlett 2i2 is powered via USB from a computer.

What should you look for when choosing?

What to consider What to look for Who is this important for?
Checking mix detail Compare your options using the same familiar mix, through the same device and at a controlled volume. If you mainly want to assess balance and placement, open-back headphones may suit you in a quiet room. Around 29% of consumers prioritise mix detail.
Connection and power Check your device’s output, the jack size, whether you need an adapter and your interface’s power requirements. If you want to use your existing audio source without reserving an extra socket for your headphones, check the connections first. Around 29% of consumers prioritise connection and power.
Sound isolation Decide whether you’ll only be listening or also recording with a microphone; fit matters too. If you’re recording as well or the room isn’t quiet, closed-back headphones can help limit the sound reaching the microphone. For consumers who prioritise isolation, this is their main concern when buying; they make up around 24%.
Comfort during long sessions If possible, try the headphones during a realistic listening session and check whether the pads and cable can be replaced for that exact model. If you spend long stretches working on a mix, fit and maintenance may matter more than other factors. Around 18% of consumers prioritise comfort during extended wear.

Common mistakes

  • Assuming USB power never needs an additional supply

    Depending on how much power is needed, a USB-powered interface may require an additional power supply. Focusrite says that the fourth-generation Scarlett 2i2 can be powered separately via its 5V DC USB-C port.

    Check the power requirements for your interface and computer before assuming you won’t need an available socket.

  • Treating all DT 770 PRO versions as the same model

    beyerdynamic offers 32, 80 and 250 ohm versions, designed for different types of audio source. The specifications for one version don’t automatically apply to another.

    Check the full model variant and consider it alongside your device’s headphone output.

  • Choosing open-back headphones for recording near a microphone

    According to Focusrite, closed-back headphones can help limit the sound reaching the microphone; open-back headphones aren’t designed for this.

    If you’re recording near a microphone, choose closed-back headphones instead. Consider open-back models if you’ll mainly be listening in a quiet room.

  • Confusing an adapter with full compatibility

    An adapter can change the jack size, but it won’t tell you whether your device’s output can drive the headphones properly.

    Check the output size, the adapter supplied and the capabilities of your audio source.

Brands to consider for this choice

beyerdynamic

According to beyerdynamic, the open-back DT 900 PRO X is designed for critical listening and mixing; the closed-back DT 770 PRO is intended for a different listening or recording situation.

  • According to the European specifications, the DT 900 PRO X has a detachable cable, a 3.5mm plug with a 6.35mm adapter and an impedance of 48 ohms.
  • The DT 770 PRO is available in 32, 80 and 250 ohm versions. The manufacturer’s claims about sound and comfort are not independent measurements.

Sennheiser

Sennheiser positions the open-back, wired HD 490 PRO for production, mixing and mastering.

  • Sennheiser lists two types of ear pads, a detachable cable and 3.5mm and 6.3mm connection options.
  • Check with your own audio source that the headphones play loudly enough. The open-back design isn’t intended to limit microphone spill; claims about accuracy and comfort come from the manufacturer.

Sony

The MDR-7506 is a closed-back, wired professional headphone for anyone looking for a recording or monitoring option.

  • Sony Professional lists an impedance of 63 ohms and includes a 3.5mm-to-6.3mm adapter.
  • These specifications don’t prove that the model will be more comfortable for every wearer or help you assess a mix more accurately than other models.

Audio-Technica

The ATH-M40x is a closed-back, wired option for anyone looking for monitoring and isolation in one model.

  • The European product information lists two detachable cables.
  • The description of a flat response and accurate reproduction comes from Audio-Technica. If you’re buying a replacement cable, check that it has the correct model-specific connector.

Devine

The closed-back, wired PRO 4000 is an option for monitoring a mix through a headphone output.

  • The product description lists 32 ohms, detachable cables and a 3.5mm-to-6.35mm adapter.
  • These details alone don’t indicate how accurately the model will let you assess your mix; compare it with your own audio source and listening material.

Related Joybuy products

Related products coming soon.

Frequently asked questions

Do I need an extra socket for wired studio headphones?

Not for the passive, wired headphones reviewed here: you connect them to a suitable headphone output. Your computer, mixer or interface does need power, though. Focusrite explains that a fourth-generation Scarlett 2i2 can be powered via a computer’s USB connection; check the power requirements for your own interface.

Will a 3.5mm plug fit my audio interface?

Check your interface’s output first. Focusrite specifies a 6.35mm TRS plug for the headphone output on the fourth-generation Scarlett 2i2; if your headphones have a smaller plug, you’ll need a suitable adapter. The connection may differ on another interface.

Should I automatically rule out headphones with a higher impedance?

No. Consider how they work with your audio source rather than looking only at the number of ohms. Focusrite notes that usable volume also depends on factors such as the source material and listening environment. Check your output specifications and listen at a controlled volume.

How do I maintain headphones for longer mixing sessions?

Check whether the pads and cable can be replaced for that exact model. beyerdynamic lists replaceable pads for the DT 770 PRO; Sennheiser lists replaceable pads and a detachable cable for the HD 490 PRO. Check that replacement parts have the correct model-specific connection.

How can I avoid listening too loudly during long mixing sessions?

Keep the volume down and take breaks. The World Health Organization gives a maximum of 40 hours per week at an average of 80 dB as an example; at 90 dB, that falls to four hours per week. The position of the volume control doesn’t, by itself, measure decibels.