Who is this buying guide for?

Listening back in a noisy home

You want to keep track of changes in a mix while household appliances or other noise at home are audible. A well-fitting pair of closed-back headphones may be worth considering; beyerdynamic and Sennheiser describe both closed-back and open-back options.

Mixing at home on the move

You want to move between rooms while listening back, so you need to consider the wireless mode, the connection to your source and whether a transmitter is required. AIAIAI and Audio-Technica describe a range of wireless and wired listening options.

Critical mix comparisons

You want to assess small changes in balance or stereo placement, and may prefer to set aside a separate, quieter time to do so. Sennheiser and beyerdynamic describe open-back and closed-back studio headphones for different listening situations.

What should you look for?

Wireless with a dedicated transmitter

Choose this if: you want to move around while doing the housework and can connect the transmitter to your audio source. AIAIAI states that the TMA-2 Studio Wireless with the X03 transmitter has latency of less than 10 ms over W+ Link.

Bear in mind: that figure applies to the stated combination and is not a measurement of your entire listening chain at home. Check that the transmitter and connection are compatible with your source.

Bluetooth with a wired option

Choose this if: freedom of movement is important, but you also want the option to listen back using a cable. The Audio-Technica ATH-M50xBT2 offers Bluetooth, a wired option and an adjustable low-latency mode.

Bear in mind: low-latency mode does not prove that every Bluetooth source or audio chain is suitable for time-critical monitoring.

Closed-back, wired

Choose this if: household noise gets in the way of your comparisons and you can stay near a suitable headphone output. According to beyerdynamic, the DT 700 PRO X is closed-back and wired, with a detachable cable.

Bear in mind: the cable limits your freedom of movement, and the level of isolation also depends on the fit.

Open-back, wired

Choose this if: you want to compare changes in spatial presentation in a quiet room. According to Sennheiser, the HD 490 PRO is open-back and wired, with replaceable ear pads.

Bear in mind: an open-back design does not block household noise, and the cable limits your freedom of movement.

Start by asking whether you mainly want to move around freely, reduce household noise or compare a mix in peace. Then check the fit, connections and listening mode you’ll actually use.

What to consider What should you check? Who is this most important for?
Household noise Check that the ear pads fit well, then compare the same passage with normal household noise and in a quiet setting. Don’t simply turn up the volume to drown out the noise. If I can hear household noise while doing chores, I want to know whether the fit provides enough isolation for listening back. Around 36% of consumers prioritise reducing household noise.
Freedom of movement Check the output on your source, whether you need a transmitter and which wireless mode is active. If I’m moving between rooms, I don’t want a cable to get in the way, and I want to know which connection I’m actually using. Around 29% of consumers prioritise freedom of movement.
Comparing mixes Compare the same passage at the same volume and with the same sound settings; revisit decisions about balance and stereo in a quiet setting. If I want to assess small changes in balance or stereo placement, I don’t want background noise or changing settings to affect the comparison. Around 21% of consumers prioritise comparing mixes.
Fit and maintenance Check the fit, including when wearing glasses, and whether the ear pads and cables are replaceable for the exact model. If I wear headphones often, I want them to stay comfortably in place while I’m using them, and I want to know how to maintain the parts. Around 14% of consumers prioritise comfort and ease of maintenance.

Common buying mistakes

  • Assuming wireless always means low latency

    AIAIAI’s stated latency applies to W+ Link with the X03 transmitter. Bluetooth is a different operating mode.

    Before relying on timing, check the exact model, transmitter, source output and active mode. Also make sure the transmitter you need is included with the set you choose.

  • Choosing an open-back model to block household noise

    Open-back headphones do not block household noise, even when you use them to compare changes to a mix.

    For noisier moments, consider a well-fitting closed-back pair and save an open-back model for quieter listening.

  • Changing ear pads without listening to the same reference again

    Sennheiser says the two sets of ear pads for the HD 490 PRO each have their own sound signature. This can affect a comparison.

    For a direct comparison, use the same set of ear pads and the same sound settings.

    If you need replacements, ear pads may be a separate maintenance purchase.

Brands to consider

AIAIAI

The TMA-2 Studio Wireless is worth considering if you’re looking for studio headphones to use on the move with the included X03 transmitter.

  • AIAIAI states that W+ Link with the transmitter has latency of less than 10 ms.
  • This figure is not an independent measurement of the entire listening chain. According to AIAIAI, the older TMA-2 Studio Wireless+ is no longer in production, so don’t treat it as the current standard model.

Audio-Technica

The ATH-M50xBT2 combines Bluetooth listening with a wired option for listening back separately.

  • Audio-Technica lists multipoint connectivity and an adjustable low-latency mode.
  • This mode does not prove that every source is suitable for time-critical monitoring. The manufacturer’s stated connection to the wired ATH-M50x is not an independent measurement of neutrality.

beyerdynamic

The closed-back DT 700 PRO X suits anyone who wants to monitor over a wired connection or compare a mix with household noise in the background.

  • The official specifications list 48 ohms, a detachable cable and a closed-back design.
  • Its suitability for mixing is the manufacturer’s assessment; the cable remains a drawback when moving around.

Sennheiser

The open-back HD 490 PRO is an option for a quieter, focused comparison session.

  • Sennheiser lists two interchangeable sets of ear pads with different sound signatures, as well as a detachable cable.
  • The open-back, wired design does not block household noise and limits your freedom of movement.

Sony

The MDR-7506 is a wired studio option to compare if you’re staying by your playback device.

  • Sony Netherlands lists a 3 m cable and a weight of 230 g.
  • These model specifications do not describe a wireless option; the long cable needs consideration when doing household chores.

Joybuy products

The selection below features wireless over-ear headphones for listening back while you’re on the move. For important changes in balance and stereo, also check your mix in a quiet setting using your usual listening setup.

MINISO MG210 wireless noise-cancelling over-ear headphones, black

MINISO MG210 Wireless Noise-Cancelling Over-Ear Headphones (Black)

The Bluetooth over-ear design is made for wireless listening back while you’re on the move; the product description lists active noise cancellation.

The product name lists a 24-hour battery life and a secure fit.

View at Joybuy
Bose QuietComfort Ultra Bluetooth Headphones, black

Bose QuietComfort Ultra Bluetooth Headphones (Black)

Bluetooth and a wired listening option offer different ways to listen back; check which mode suits your source.

The product description lists a closed-back over-ear design, active noise cancellation, multipoint connectivity and an audio cable for wired listening.

View at Joybuy
Sony WH-1000XM5 wireless headphones with noise cancelling, silver

Sony WH-1000XM5 Wireless Headphones with Noise Cancelling (Silver)

The wireless over-ear design is suited to listening back while you’re on the move; check that it pairs with your playback device.

The product description lists Bluetooth, noise cancellation and simultaneous pairing with two devices.

View at Joybuy
Bose QuietComfort Headphones, Sandstone

Bose QuietComfort Headphones (Sandstone)

Bluetooth and a detachable cable let you listen back wirelessly or over a wired connection; check which connection you’re using for each source.

The product description lists a closed-back over-ear design, Bluetooth 5.4 and active noise cancellation. No charger is included and PD fast charging is not supported; the description recommends a charger with an output of 1,8–2,5 W. The product information mentions magnets and advises people with a medical implant to consult a doctor.

View at Joybuy
Bose QuietComfort Ultra Headphones 2nd Gen, black

Bose QuietComfort Ultra Headphones (2nd Gen, Black)

These Bluetooth over-ear headphones are designed for wireless listening back while you’re on the move; you can also check important mix decisions in a quiet setting.

The product description lists active noise cancellation, a transparency mode, app settings and a USB-C charging cable.

View at Joybuy

Frequently asked questions

Can I use standard Bluetooth to assess changes to a mix straight away, without latency?

Don’t assume so. AIAIAI’s stated latency of less than 10 ms applies specifically to W+ Link with the X03 transmitter. According to Audio-Technica, the ATH-M50xBT2 has an adjustable low-latency mode, but your source and chosen connection also matter. Check the entire listening chain before making time-critical decisions.

How can I keep my headphones in good condition with regular use around the house?

Check whether the cable and ear pads are replaceable for the exact model. Audio-Technica recommends wiping headphones with a dry cloth after use; for a more thorough clean, follow the instructions for your model and its materials.

What should I know about buying online, returns and faults?

For an online purchase from a professional seller in the EU, you generally have a 14-day right to cancel from the date of delivery; exceptions and return costs disclosed in advance may apply. Your Europe states that goods in the EU have a statutory minimum guarantee of two years; a manufacturer’s commercial guarantee does not replace your statutory rights with the seller.

Are there product rules for wireless headphones in the Netherlands?

For equipment with Bluetooth or a radio module, Business.gov.nl refers to the Radio Equipment Directive. The guidance describes the manufacturer’s obligations regarding conformity and CE marking; check the product information for the specific listing before you buy.

Should I turn up the volume to hear changes to a mix over household noise?

No. Instead, choose a quieter time to compare, or check the fit and isolation. The World Health Organization gives 80 dB for up to 40 hours per week as an example; this is not a volume setting you can read off every pair of headphones.