For checking your mix in a quiet home office, wired open-back studio headphones are a sensible starting point. Choose a closed-back model if you want to reduce background noise or record as well. RTINGS describes open-back models as better suited to mixing and mastering, but they let sound escape and do little to block out your surroundings. Then check the fit and compatibility with your equipment, and listen to important mix decisions through a second audio source too.
Who is this guide for?
Critical mixer with a quiet home office
You want to assess balance and placement in a mix and can accept some sound leakage; open-back models are a sensible starting point for comparison. RTINGS describes open-back designs as suitable for mixing and mastering.
Mixer in a shared or noisy home office
You want to reduce background noise or use the same headphones while recording. Closed-back models are worth comparing in this case, such as those described as closed-back by beyerdynamic and Audio-Technica.
Mixer who spends long hours at the computer
Consider fit, connectivity and replaceable parts, whichever design you choose. RTINGS highlights comfort as a consideration for long studio sessions; Sennheiser and AKG list replaceable parts for specific models.
What should you look for?
Open-back and wired
Choose this if: you mainly want to assess balance and placement in a quiet home office. RTINGS describes open-back models as suitable for mixing and mastering.
Bear in mind: sound escapes and little background noise is blocked out.
Closed-back and wired
Choose this if: your workspace is shared or noisy, or you record in the same room.
Bear in mind: closed-back does not mean that sound is completely blocked; check the seal and leakage in your own setup.
Semi-open
Choose this if: you want to compare a deliberate middle ground and do not expect complete isolation. The Dutch buying guide from Maak Digitale Muziek distinguishes semi-open models from open-back and closed-back designs.
Bear in mind: the label alone does not tell you how much sound a particular model lets through; assess it in your own workspace.
When choosing studio headphones for checking mixes at home, the main considerations are your workspace, what else you use them for and how you connect them.
| What to consider |
What should you check? |
Who is this important for? |
| Mix detail and placement |
Open-back design, wired connection and how the model sounds in your own workspace. |
If I mix in a quiet room, I want to assess balance and placement, and I can accept some sound leakage. Around 33% of consumers put mix detail first. |
| Isolation and recording |
Closed-back earcups, the seal of the pads and any sound that might be picked up by a microphone. |
In a shared space, I want to reduce background noise or stop my headphones leaking into the microphone. Around 27% of consumers prioritise isolation. |
| Comfort during long sessions |
Fit, headband pressure, warmth and suitable replacement pads. |
If I spend long hours at the computer, I want a fit that stays comfortable for me. Around 20% of consumers prioritise long-term comfort. |
| Connectivity and maintenance |
Your computer or audio interface output, plug and adapter, cable length and replaceable parts. |
If I want to keep using my existing equipment, the connection needs to be right and I want to know which parts can be replaced. Around 20% of consumers prioritise connectivity and maintenance. |
Things to watch out for when buying
-
Taking ‘studio’ on the packaging as proof that every mix decision will be right
Open-back and closed-back designs differ in sound leakage and isolation. Manufacturers’ descriptions are not independent measurements that can be directly compared.
Check important mix decisions through another trusted audio source too.
-
Choosing an open-back model when housemates or a recording microphone can hear it
Open-back models let sound escape and do little to block out background noise, so other people or a microphone may pick up the sound.
In this situation, compare a closed-back model too and check for sound leakage in your own workspace.
-
Assuming impedance variants of the same model are identical
beyerdynamic describes differences in driver design and sound between DT 770 PRO variants, so impedance is not just a volume setting.
Before buying, check the exact version and whether it is compatible with your audio output.
-
Confusing the manufacturer’s warranty with your rights as a consumer
If a product is faulty, the seller is your point of contact under Dutch statutory consumer rights; a manufacturer’s warranty is separate. The Government of the Netherlands states that there is no fixed statutory warranty period.
Keep your proof of purchase and check the seller’s and manufacturer’s terms separately.
Brands worth comparing
The models below are examples of open-back and closed-back options; their features apply to the models listed and not necessarily to a brand’s entire range.
beyerdynamic
beyerdynamic describes the DT 900 PRO X as an open-back model for mixing, and the DT 770 PRO 80 ohm as closed-back studio headphones.
- According to the manufacturer, the DT 900 PRO X has a detachable cable and a nominal impedance of 48 ohm.
- According to beyerdynamic, DT 770 PRO versions also differ acoustically; check the exact variant.
Sennheiser
Sennheiser describes the open-back HD 490 PRO as headphones for production, mixing and mastering.
- For the HD 490 PRO, Sennheiser lists two types of pads and a detachable cable.
- An open-back design is less suitable when you need isolation.
AKG
AKG describes the K702 as open-back studio headphones for mixing and mastering.
- AKG specifies that the K702 has a detachable cable, replaceable pads, a nominal impedance of 62 ohm and a 3.5mm plug with a 6.3mm adapter.
- Because of its open-back design, the K702 does not provide the isolation you would get from a closed-back model.
Audio-Technica
Audio-Technica offers the closed-back ATH-M50x for uses including studio work and listening at home.
- According to Audio-Technica, the ATH-M50x has a detachable cable and earcups designed for passive isolation.
- A closed-back design is not automatically the right choice for every mixing situation; compare it with open-back models if you work in a quiet space.
Sony
Sony describes the closed-back MDR-7506 as foldable monitor headphones for uses including recording.
- Sony lists 40 mm drivers and a supplied 3.5mm/6.3mm adapter.
- A closed-back design does not automatically make this model better suited to assessing spatial aspects of a mix than an open-back alternative.
Joybuy product selection
Over-ear headphones for use in a home office, with a focus on background noise and wired listening.
No image available
Sennheiser MOMENTUM 4 Wireless, black
The noise-cancelling version may suit you if you want to reduce background noise in a home office; check mix decisions through a second audio source too.
The product information lists a supplied 3.5mm audio cable for wired use. Check that it is compatible with your computer or audio interface.
This version lists 60 hours of battery life, fast charging and 4 microphones.
Joybuy
Frequently asked questions
Can I check my mix while recording vocals in the same room?
Closed-back headphones are a sensible first option to compare, as RTINGS says they leak less sound into the microphone than open-back models. Check how much sound actually leaks at your microphone and listening volume; ‘closed-back’ does not guarantee that nothing will be picked up.
Will studio headphones connect directly to my computer or audio interface?
Check that your device’s output matches the headphone plug and any adapter. According to the manufacturer, the beyerdynamic DT 900 PRO X has a 3.5mm plug and a 6.35mm adapter; check the connection separately for other models and make sure your own output gives you a usable listening volume.
How can I protect my hearing during long mixing sessions?
Keep the volume low and take breaks. The World Health Organization gives the example of a maximum of 40 hours per week at an average of 80 dB and four hours per week at 90 dB. This is listening safety advice; the volume setting on a computer does not automatically produce the same sound pressure on every device.
What if my headphones become faulty or uncomfortable after buying them online?
If a product is faulty, the Government of the Netherlands says the seller is your point of contact under Dutch statutory consumer rights. For online purchases, you usually have 14 days to change your mind; check whether this applies to your purchase. The right to change your mind after a distance purchase and a remedy for a faulty product are different things.