String arrangement mixer
You assess the positioning and balance of the strings in a quiet room and don’t need to protect a recording microphone from sound coming from your headphones. Sound On Sound discusses how sound leakage can affect recordings.
For mixing in a quiet studio, wired open-back over-ear studio headphones are an obvious choice if you don’t need to prevent sound leaking into a microphone. If you also record, or need to block out sound, compare closed-back models; with a semi-open model, you’ll need to check the isolation separately. Sonarworks points out that headphones and speakers reproduce the stereo image differently. So check the positioning and balance on another playback system too.
You assess the positioning and balance of the strings in a quiet room and don’t need to protect a recording microphone from sound coming from your headphones. Sound On Sound discusses how sound leakage can affect recordings.
You switch between mixing and recording with a microphone, so isolation may matter more than an open-back design. Sound On Sound explains why this is worth considering with studio headphones.
You work for extended periods, so as well as sound, you’ll want to assess the fit, connection and replaceable parts. Manufacturers such as Sennheiser and Audio-Technica provide model-specific information about components and connections.
First, decide whether you’ll only be mixing or recording as well. Then assess the sound, fit and connection of the exact model in your own set-up.
| What to consider | What should you check? | Who should give this more weight? |
|---|---|---|
| Stereo positioning | Assess panning and positioning in your own arrangement, then check it on another playback system. | I want to position individual string parts accurately, but I know headphones and speakers reproduce the stereo image differently. Around 31% of consumers rank stereo positioning as their top buying priority. |
| Sound balance | Compare with recordings you know; a stated frequency range alone doesn’t prove that the sound is neutral. | I want to assess the balance between string parts and quiet and loud passages without relying on a specification alone. Around 25% of consumers prioritise sound balance. |
| Comfort and maintenance | Check the fit and weight of the exact model, and whether its ear pads and cable can be replaced. | For long sessions, I want headphones that feel comfortable and to know which parts I can replace on my model. Around 19% of consumers put comfort and maintenance first. |
| Isolation | Check for sound leakage if you’re recording or someone else is working in the room; don’t assume a semi-open model offers enough isolation. | I record with a microphone or don’t want to disturb others, so sound leaking from the headphones could affect my choice. Isolation is the top priority for around 13% of consumers. |
| Connection | Check the plug and any adapter against your audio output, and test whether the volume is sufficient with your own interface. Nominal impedance alone won’t tell you. | I want to use my headphones with my existing set-up and know in advance whether I’ll need an adapter. Around 12% of consumers start with the connection as their main buying consideration. |
Sound from open-back headphones can reach a recording microphone; a quiet room won’t prevent this leakage.
Before buying, decide whether you’ll use the headphones only for mixing. If you also record, compare closed-back models.
A stated frequency range alone won’t tell you whether the balance of your arrangement will translate well to other playback systems. Sonarworks explains that a mix can sound different through headphones and speakers.
Listen to material you know, assess your own arrangement and check the mix on a second system.
Connections and replaceable parts vary between models. Check the details for the exact version before you order.
Compare the plug and supplied adapter with your audio output, and check whether model-specific ear pads or cables are available.
You may need to buy accessories as well as the headphones, such as a suitable adapter or model-specific replacement parts.
The DT 900 PRO X is open-back, while the DT 700 PRO X is closed-back. They therefore suit different mixing and recording needs.
The open-back HD 490 PRO is an option if you want to use different ear pads when mixing.
The open-back ATH-R70x and closed-back ATH-M40x cater to different needs around open listening and isolation.
The K240 Studio is a semi-open model to consider alongside open-back and closed-back headphones.
Austrian Audio says the open-back Hi-X65 is designed for mixing and mastering.
With the analogue wired models covered here, first check whether the plug fits your output directly or with the supplied adapter. Also check whether the volume is sufficient with your own interface; nominal impedance alone won’t tell you.
Check which parts can be replaced on the exact model. Sennheiser lists replaceable ear pads for the HD 490 PRO, while Austrian Audio lists replaceable ear pads and cables for the Hi-X65. This doesn’t mean parts will fit other models.
The World Health Organization advises keeping the volume down, taking listening time and exposure into account, and taking breaks. Its example of 80 dB for a maximum of 40 hours per week is guidance on exposure, not a guaranteed safe volume setting for your audio interface.
According to ACM ConsuWijzer, online purchases generally come with a statutory cooling-off period of up to 14 days after delivery, with some exceptions. In addition, if a product doesn’t do what you could reasonably expect when used normally, you have rights against the seller under the statutory guarantee; in the Netherlands, there is no fixed general two-year period for this. Check the terms for your specific purchase and how the product is used.