Who is this relevant for?

Mixing in a quiet room

If you’re mainly assessing string balance and stereo placement and don’t need isolation, compare open-back models and consider how they work with your listening source and fit. Sennheiser and beyerdynamic position specific open-back models for mixing.

Mixing in a shared home office

If conversations drown out quieter passages, or you also record with a microphone, compare closed-back models. beyerdynamic describes the DT 700 PRO X as closed-back, while Audio-Technica positions the ATH-M40x for monitoring, among other uses.

Creating music through long listening sessions

If you switch between arranging, editing and mixing, check the fit, replaceable parts and compatibility with your current equipment. Sennheiser lists two types of ear pads for the HD 490 PRO.

What should you look for when choosing?

Start with your room and whether you’ll be recording. Then assess balance, comfort and connectivity using familiar music and your own equipment.

Open-back, wired

When: if you mainly want to assess string parts and stereo placement in a quiet room of your own.

Trade-off: open-back ear cups offer little isolation, so background noise can disrupt quieter passages.

Closed-back, wired

When: if conversations interrupt your mixing, or you also record with a microphone. Manufacturers position models such as the DT 700 PRO X and ATH-M40x for closed-back use.

Trade-off: how much isolation you get depends partly on the fit. Compare familiar reference tracks to see how the stereo placement sounds to you.

What to consider What should you check? Who is this important for?
String balance and stereo placement Compare familiar string passages and listen in a quiet room. Check the fit too. If I’m balancing string parts in a quiet room, I want to be able to assess small differences in level and placement. Around 40% of consumers say balance and stereo placement are their main concern when buying.
Isolation from household noise or during recording Test the seal when the headphones are sitting comfortably. During recording, check whether sound from the headphones can be heard by the microphone. If conversations disrupt quiet passages or I’m recording with a microphone, I want to know whether a closed-back model suits my working setup. Around 30% of consumers prioritise isolation or use during recording.
Comfort during long sessions Check the pressure around your ears, including when wearing your usual glasses, and see whether suitable replacement pads are available. If I’m arranging and mixing for long stretches, I want a fit that stays comfortable throughout my sessions. Around 20% of consumers name comfort as their main buying concern.
Connectivity, drive requirements and maintenance Compare the plug and adapter with your interface. Assess the usable volume alongside the characteristics of your listening source. If I want to use my current interface and be able to replace parts, I check the connections and maintenance requirements of each model. Around 10% of consumers prioritise compatibility or replaceable parts.

Common buying mistakes

  • Assuming a wide frequency range means a mix will translate reliably

    Frequency range alone doesn’t tell you how headphones will sound in practice. Sonarworks also points out that impedance without sensitivity doesn’t give you the full picture.

    Compare familiar passages and pay attention to balance, fit and the acoustics of your workspace, rather than focusing only on the frequency extremes.

  • Choosing an open-back model when you need isolation

    Open-back ear cups offer little isolation. This can be a problem if conversations mask quieter passages or you’re recording with a microphone.

    Before buying, decide whether quiet listening or isolation matters more in your everyday workspace.

  • Using impedance as the only measure of compatibility

    Impedance alone doesn’t tell you how loud your interface can drive a pair of headphones. The connection and sensitivity matter too.

    Check how they work with your own interface and listen at a comfortable level before considering accessories or other equipment.

Brands to compare

beyerdynamic

Within the PRO X range, compare the open-back DT 900 PRO X for mixing with the closed-back DT 700 PRO X for recording and listening with isolation.

  • beyerdynamic specifies a detachable cable, a 3.5mm plug with a 6.35mm adapter and 48 ohms for the DT 900 PRO X.
  • The DT 700 PRO X has a closed-back design. The features of these models don’t automatically apply to older DT models.

Sennheiser

The open-back HD 490 PRO is worth comparing if long mixing sessions and switching between producing and mixing are important to you.

  • Sennheiser lists two types of ear pads for different tasks, as well as replaceable pads.
  • The manufacturer’s claims about accuracy aren’t independent measurements, and the open-back design doesn’t block out background noise.

Audio-Technica

The closed-back ATH-M40x is worth comparing if you want to use one wired pair of headphones for monitoring, recording and mixing.

  • Audio-Technica lists two detachable cables and a 6.3mm adapter.
  • The manufacturer’s claim of a flat response isn’t an independent measurement for this comparison.

AKG

The open-back K702 is an alternative to compare for critical listening and mixing in a quiet room.

  • AKG specifies a detachable mini-XLR cable, replaceable ear pads and 62 ohms.
  • The manufacturer’s description of its accuracy doesn’t tell you how the model will work with every interface or fit every head.

Neumann

The open-back NDH 30 is another option to compare if your main focus is critical mixing and editing.

  • Neumann positions the model for stereo localisation and mixing.
  • Neumann’s claims about its sound are manufacturer claims, and the open-back design offers no isolation.

Products at Joybuy

The selection below includes headphones and a headset for general listening or communication. Noise cancellation or an audio cable, where listed, doesn’t by itself prove that a model is suitable for making mixing decisions. Check the connection and try the model with your own interface and familiar reference tracks.

Sennheiser MOMENTUM 4 Wireless headphones, black

Sennheiser MOMENTUM 4 Wireless, black

Could be relevant if you also want to listen wirelessly as well as mix. Check that the wired connection suits your interface and workflow.

The product description lists adaptive noise cancellation, EQ, an included 3.5mm audio cable and a 60-hour battery life.

Joybuy
Bose QuietComfort Ultra Bluetooth headphones, black

Bose QuietComfort Ultra Bluetooth Headphones, black

Could be worth considering if you also want to reduce background noise in a shared space. Check that the wired listening mode suits your mixing workflow.

The product description lists a closed-back design, active noise cancellation and an audio cable connection.

Joybuy
Jabra Evolve2 75 headset

Jabra Evolve2 75 headset

Could be relevant if you also need a headset for office work. Check that the connection and listening mode suit your interface and mixing needs.

The product description lists eight microphones, Bluetooth 5.2, active noise cancellation and USB-C.

Joybuy
Bose QuietComfort Headphones, Sandstone

Bose QuietComfort Headphones, Sandstone

Could be interesting if you also want to listen around background noise. Check the connection and how it works with your interface before choosing this model for mixing.

The product description lists Bluetooth, noise cancellation and a transparency mode.

Joybuy
Bose QuietComfort Ultra Headphones (2nd Gen), black

Bose QuietComfort Ultra Headphones (2nd Gen), black

Could be an option if you also want to reduce background noise. Check that the wired mode and connection work with your mixing equipment.

The product description lists a closed-back design, active noise cancellation and an audio cable for use without a battery.

Joybuy

Frequently asked questions

Can I tell from the impedance whether my audio interface can drive my headphones loudly enough?

No. Impedance alone doesn’t give you the full picture; according to Sonarworks, sensitivity matters too. Check the connection and try the exact combination with your interface at a comfortable listening level.

How can I make long mixing sessions comfortable and safe?

Check that the ear pads and headband fit well, and whether replacement parts are available for your model. Don’t turn the volume up to drown out household noise, and take regular breaks. The World Health Organization highlights that both sound level and duration of exposure matter.

What rules apply when buying online from a business in the Netherlands?

According to the Dutch Government, you usually have a 14-day cooling-off period when buying at a distance, although exceptions and specific conditions should be checked with the seller. If a product is faulty, the seller is your point of contact for your statutory guarantee rights, in addition to any manufacturer’s warranty.