Who is this option for?

Streamer with a nearby microphone

You want to hear your voice and the stream without unnecessary headphone sound leaking into the microphone recording. SoundGuys lists closed-back studio headphones as one option for limiting leakage when recording with a microphone. Check how they perform with your own setup.

Switching between sitting and standing

You need a cable route that works at both desk heights without pulling on your headphones. AKG lists several cables included with the K371, while RØDE specifies a 2.4 m cable for the NTH-100.

Streamer with long sessions

You’re looking for a fit that feels comfortable during your own streams, as well as a good seal. AKG, RØDE and Sennheiser describe different cushions or designs, but that information is no substitute for trying them on.

What should you look for when buying?

What to consider What should you check? Who is this important for?
Seal and microphone leakage Check whether the model is closed-back, then test the seal and microphone recording at your usual listening volume. If I stream close to the microphone, I want to hear my voice clearly without headphone sound leaking into the recording. Around 33% of consumers put the seal and microphone leakage first.
Cable route and connection Measure the route with the desk at its highest setting, and check the plug type, included cable and any adapter you may need. I want to sit and stand without the cable becoming taut or pulling on my headphones. Around 27% of consumers prioritise the cable route and connection when using different desk heights.
Fit during long sessions If possible, try the headphones on with your glasses and check whether the ear cushions are replaceable. During long streams, I want a fit that stays comfortable for my head and ears. Manufacturer claims can’t tell me how a model will feel on me. Around 20% of consumers put long-term comfort first.
Direct monitoring Check the headphone output, any adapter you may need, and which signals your interface or mixer sends to the headphone mix. I want to monitor my voice and the stream at the same time through my own monitoring setup. Around 20% of consumers give the highest priority to monitoring their voice and mix directly.

Common mistakes

  • Expecting studio headphones to fix latency by themselves

    Direct monitoring depends on the interface and signal path you’re using. Wired headphones alone won’t remove latency from the software chain.

    Before you buy, check your interface’s connection and monitoring options, and which inputs and computer sounds you can hear at the same time.

  • Comparing only the stated cable length

    The route around an adjustable desk can be longer than the distance to your interface. Cables and connections are also not interchangeable between every model.

    Measure the route with the desk at its highest setting, and check which cable and connector are included with the exact version you’re considering.

  • Assuming Bluetooth is just as suitable for direct voice monitoring

    Bluetooth can add latency. For real-time microphone monitoring, RØDE recommends wired headphones with its supported mixers. This isn’t a measurement of latency for every Bluetooth combination.

    For direct monitoring, choose a wired signal path where possible. If freedom of movement matters more, check whether your equipment supports Bluetooth monitoring and test the signal path.

  • Turning up the volume to drown out background noise

    Headphones that don’t fit well can let in more background noise. VeiligheidNL points out that a good fit can reduce the need to listen at a higher volume.

    Check the seal, and bear both volume and listening time in mind when you’re listening.

Brands to consider

AKG

The closed-back, wired K371 is worth comparing if you’d like a choice of included cable options.

  • AKG’s Dutch-language K371 page lists three detachable cables, including a 3 m straight cable, as well as replaceable ear cushions.
  • Check that the cable route and fit suit your desk. The K371-BT is a separate model.

RØDE

RØDE also positions the closed-back NTH-100 for streaming and long content-creation sessions.

  • RØDE specifies a 2.4 m cable with a locking, detachable connection that can be plugged into either earcup.
  • Comfort claims come from the manufacturer. According to RØDE, the NTH-CABLE is not interchangeable with the cable for the NTH-100M headset.

Audio-Technica

The closed-back ATH-M50x could suit you if you’re looking for a wired model with a detachable cable.

  • Audio-Technica lists a detachable cable and passive isolation.
  • Check the fit and cable route for your setup. A brand’s affordability claim is not a current price comparison.

beyerdynamic

The closed-back DT 770 PRO is a wired option to consider if replaceable parts are important to you.

  • The European product information lists 32, 80 and 250 ohm versions.
  • Don’t assume specifications or power requirements are the same across versions. For cable replacement, beyerdynamic recommends using a service centre or qualified professional.

Sennheiser

The closed-back HD 480 PRO is an option if you’d like to be able to connect the cable to either the left or right earcup.

  • Sennheiser lists a detachable cable, connections on both earcups and an over-ear design.
  • Claims about accuracy and comfort come from the manufacturer. Check the fit and connection with your own monitoring setup.

Joybuy product picks

These models offer wired options, or can be used with a wire, for comparison when monitoring at a sit-stand desk. Check the connection on your interface for each model, and make sure the cable route works at both desk heights.

Sennheiser MOMENTUM 4 Wireless, white

Sennheiser MOMENTUM 4 Wireless (White)

Worth comparing if you’re looking for over-ear headphones with a wired listening option.

The product name lists 60 hours of battery life and noise cancellation. The product information also mentions wired use with a 3.5mm audio cable. Check that the connection works with your interface.

View at Joybuy
Sonos Ace, black

Sonos Ace (Black)

A closed-back over-ear option to compare if you want to limit sound around a microphone and need a wired connection.

The product information lists wired connections via USB-C and 3.5 mm. It also says the headphones are not designed to be worn while charging.

View at Joybuy
Razer BlackShark V2 X 7.1, wired gaming headset, black

Razer BlackShark V2 X 7.1 Wired Gaming Headset (Black)

This wired gaming model could be an option if you use a separate microphone setup. Check how the headset connects to your equipment.

The product information lists a wired 3.5mm connection and a microphone. Check that the headset connection works with your monitoring setup.

View at Joybuy
Siukie H100 gaming headset with USB and 3.5mm connections

Siukie H100 Gaming Headset (USB en 3,5 mm)

A wired headset option to compare if you want a USB or 3.5mm connection.

The product name lists USB and 3.5mm plugs. Check which input your interface or mixer supports.

View at Joybuy
Bose QuietComfort Ultra Headphones, second generation, black

Bose QuietComfort Ultra Headphones (2nd Gen) Black

An option to compare if you’d like a wired listening option as well as Bluetooth.

The product information lists Bluetooth and a detachable cable with USB-C and 3.5mm connections. Check which connection is suitable for direct monitoring with your equipment.

View at Joybuy

Frequently asked questions

Will wired studio headphones automatically fix latency in my own voice?

No. Your monitoring setup matters too. Focusrite describes direct monitoring on supported interfaces as a way to send the input straight to the headphone output. Check which inputs and computer sounds your device lets you hear in the mix.

How should I account for the cable when using a sit-stand desk?

Measure the cable route with the desk at its highest position, including the distance to your interface and room to move. AKG lists a 3 m straight cable among the options for the K371 on its Dutch-language page, while RØDE specifies a 2.4 m cable for the NTH-100.

What should I do if the ear cushions wear out?

Check which parts are available for the exact version. AKG lists replaceable ear cushions for the K371. For cable replacement on the DT 770 PRO, beyerdynamic recommends using a service centre or qualified professional. That’s different from swapping a detachable cable yourself.

What are my rights when buying online in the Netherlands?

For many consumer purchases made at a distance, you have a 14-day cooling-off period, subject to exceptions and conditions that you should check for the specific purchase. You’re also entitled to a statutory guarantee if a product, when used normally, doesn’t meet what you could reasonably expect. The seller is your point of contact.

Is a CE logo always required on every studio headphone?

No, not as a general rule for every product described this way. According to the European Commission, CE marking is required only when the applicable harmonised EU rules require it for that particular product. Check the specific model rather than relying on the product category alone.