If you’re streaming alongside colleagues or with a live microphone, start with a well-fitting, wired, closed-back pair of studio headphones. Check that the connection and cable are compatible with your equipment. An open-back model may be suitable for critical listening in a space where sound leakage isn’t an issue. Beyerdynamic describes the DT 770 PRO as closed-back and the DT 900 PRO X as open-back; changing headphones won’t fix an incorrectly configured monitoring route or audio mix.
Who is this choice relevant to?
Streaming alongside colleagues
You monitor audio while other people are working nearby, or your microphone is close at hand. Start with a closed-back design and check how well the headphones seal at your usual listening volume. Beyerdynamic describes the DT 770 PRO as closed-back; the design alone doesn’t tell you how much sound will leak at your particular fit.
Streaming while monitoring your own voice
You want to hear yourself while speaking, so you’ll need a suitable monitoring route as well as compatible headphones. Focusrite describes direct monitoring as listening to the input signal through the interface output; OBS Studio lets you play audio from a source using its monitoring settings.
Streaming for long sessions
You wear your headphones for extended periods and want the ear pads and cable to suit your setup. Beyerdynamic, Sennheiser and AKG list replaceable ear pads for specific models; check the parts for the exact model and make sure the fit suits the way you’ll use them.
What should you look for when buying?
| What to consider |
What should you check? |
Who is this important for? |
| Isolation and sound leakage |
Check whether the model is closed-back and how the ear pads fit. At a normal listening volume, see how audible the sound is to people nearby. |
If I’m streaming alongside colleagues or with a live microphone, I want to avoid playback disturbing others or being picked up. Around 33% of consumers put isolation first. |
| Connection and voice monitoring |
Check the plug and any adapter against the output on your equipment. Check your voice, computer audio and stream mix separately. |
If I want to hear my voice while speaking, I need to know how the signal is routed and which mix I’m listening to. Around 27% of consumers prioritise voice monitoring. |
| Comfort and maintenance |
Check the fit and pressure over a realistic wearing period. See whether replacement ear pads are available for the exact model. |
For long streams, I want headphones that are comfortable to wear and have parts that can be replaced if needed. Around 20% of consumers prioritise extended wear and maintenance. |
| Assessing speech and detail |
Listen to representative speech and stream audio on models suited to your space. Also check the source routing and level meters in your software. |
If I mainly want to assess how speech and other sources sound in the monitor mix, I need to be able to check them with my own setup. Around 20% of consumers prioritise checking speech. |
Things to watch out for when buying
-
Choosing an open-back model when colleagues or a microphone are nearby
An open-back design isn’t the same as a closed-back model. Beyerdynamic positions the open-back DT 900 PRO for critical listening and the closed-back DT 770 PRO for monitoring; the ‘studio’ product category alone tells you nothing about isolation.
Choose based on your space first, then check how much sound leaks from the ear cups at a normal listening volume.
-
Blaming headphones alone for monitoring delay
Your interface and software also determine which signals you hear. Monitoring the same source through direct monitoring and software at the same time can make it difficult to tell what you’re hearing.
Test your voice and computer audio separately, and check your monitoring settings before buying different headphones.
-
Treating the 80-ohm and 250-ohm versions of the DT 770 PRO as the same purchase
Beyerdynamic sells the DT 770 PRO in separate 32, 80 and 250-ohm impedance versions. Check the full variant and make sure it’s compatible with your equipment’s output.
Compare the impedance of the version you’ve chosen with the headphone output you actually use.
-
Turning up the volume to drown out office noise
The World Health Organization points out that listening volume, listening time and repeated exposure to loud sounds are all linked to hearing risks.
Check the fit and keep the volume at a sensible level; don’t assume studio headphones will protect your hearing.
Brands to consider
beyerdynamic
The closed-back DT 770 PRO is worth considering if you monitor audio alongside other people. The open-back DT 900 PRO X is for a different use case, where isolation isn’t the priority.
- beyerdynamic lists replaceable ear pads and 32, 80 and 250-ohm versions for the DT 770 PRO.
- Check the impedance version against your equipment’s output. The DT 900 PRO X is open-back; don’t confuse it with the closed-back DT 770 PRO.
Audio-Technica
The closed-back ATH-M50x may suit you if you’re looking for wired headphones with detachable cables and swivelling ear cups.
- Audio-Technica Europe lists three detachable cables and a 6.3mm adapter with the ATH-M50x.
- The sound-isolation description is a manufacturer claim, not an independent measurement of how much sound reaches colleagues. Check the fit and make sure there’s room for the cable in your setup.
Sennheiser
The closed-back HD 280 PRO is a wired monitoring headphone with a foldable design, coiled cable and replaceable ear pads.
- Sennheiser lists up to 32 dB of ambient noise attenuation for this model.
- This model specification doesn’t guarantee the same result for every wearer, and it doesn’t measure how much sound colleagues will hear. Also check that the coiled cable suits your desk setup.
AKG
The closed-back, foldable K371 is worth considering if having a choice of cables and replaceable ear pads matters to you.
- AKG Netherlands lists three detachable cables and replaceable ear pads for the K371.
- Claims about a neutral sound and isolation come from AKG and aren’t an independent comparison with other models.
Sony
The closed-back, wired MDR-7506 is a professional headphone that Sony also positions for broadcast use.
- Sony Professional Netherlands lists an impedance of 63 ohms and a 3.5mm/6.3mm adapter.
- Check that the fixed setup you’ll use and your equipment’s output level are suitable. The product specification doesn’t prove better isolation than other models.
Joybuy products
Related products coming soon.
Frequently asked questions
Will buying different headphones get rid of the delay in my own voice?
Not necessarily. If your interface supports direct monitoring of the relevant input, it can send the input signal to your headphones with virtually no delay. Check separately which software sources and effects you can hear, and avoid monitoring the same source through two routes.
Can I connect headphones with a 3.5mm plug to a 6.3mm output?
Yes, with a suitable connection or adapter. Audio-Technica lists a 6.3mm adapter with the ATH-M50x, Sennheiser with the HD 280 PRO, and Sony with the MDR-7506. Check what’s included with the exact version and the output on your device.
What should I do if the ear pads are worn out?
Look for replacement parts for the exact model and check the fit and availability before ordering. Beyerdynamic, Sennheiser and AKG list replaceable ear pads for models including the DT 770 PRO, HD 280 PRO and K371.
Does a closed-back pair of studio headphones automatically provide enough hearing protection in an office?
No. The ‘closed-back’ description or a manufacturer’s claim about isolation doesn’t mean that. Arboportaal states that when daily noise exposure exceeds 80 dB(A), employers must make hearing protection available; above 85 dB(A), employees must wear it. The measures needed depend on actual exposure.
In the Netherlands, am I automatically entitled to exactly two years’ statutory warranty on headphones?
No. According to the Dutch Government, the Netherlands has no fixed statutory warranty period: you’re entitled to a product that works properly, depending on what you could reasonably expect from it. If there’s a fault, contact the retailer; a manufacturer’s warranty is separate.