Who is this for?

Guitarist recording with a microphone

Wants to hear the guitar and backing track without unnecessary headphone sound leaking into the microphone recording. beyerdynamic describes closed-back headphones as a way to reduce sound leakage into the microphone.

Home recordist using a standing desk

Moves between the guitar, audio interface and standing desk, so cable reach, the connection and a secure fit are worth considering. Audio-Technica and RØDE highlight cable features that may matter for this setup.

Guitarist listening back to takes

Mostly reviews recordings in a quiet room, so may consider an open-back design when sound leakage isn’t an issue. Sennheiser describes the HD 560S as an open-back model for analytical listening.

What should you look for?

Closed-back, wired: recording and playing

Choose this option: if you’re recording with a microphone or want to reduce sound leakage in a shared workspace.

Keep in mind: fit and warmth during long sessions; also check that the cable suits your desk setup.

Open-back, wired: critical listening

Choose this option: if you mainly review takes in a quiet room and aren’t using a live microphone.

Keep in mind: the open-back design lets sound through, making it less suitable for microphone recordings where that sound could end up in the take.

What to consider What should you check? Who is this important to?
Sound leakage Check whether the exact model is closed-back or open-back, and whether you’ll be using a microphone while recording. When I’m recording guitar with a microphone, I want to stop headphone sound from getting into the take. Around 36% of consumers put sound isolation first.
Cable reach Measure the distance from your interface to your playing position, and check the cable and connection on the model you’ve chosen. When standing, I want to reach my playing position without the cable restricting my movement. Around 29% of consumers prioritise suitable cable reach and a connection that works for their setup.
Monitoring delay Check your interface’s monitoring settings. According to Focusrite, direct monitoring can send the input signal straight to the headphone output. If I hear my guitar with a delay while playing, I want to know whether it’s down to the signal path. Around 21% of consumers prioritise hearing their own part in time.
Listening back and fit Decide whether you’ll mainly be playing or listening back to takes, and assess the fit in your usual playing position. When comparing takes, I want to be able to listen in a quiet room without recording with a microphone at the same time. Around 14% of consumers prioritise critical listening.

Common pitfalls

  • Using open-back headphones when recording with a microphone

    Sound from the headphones can get into the recording, so a design that’s comfortable for listening back isn’t necessarily right for playing live.

    If there’s a risk of sound leakage, start with a closed-back design and distinguish between recording and listening back to takes.

  • Assuming cable length guarantees freedom of movement

    The stated length doesn’t tell you how the cable will run around your desk and interface, or how much room your playing position requires.

    Measure the cable route, check the connection and confirm whether the cable on the exact version you’re considering is detachable.

  • Blaming delay on the headphones alone

    The route through your audio interface and software also affects how quickly you hear the guitar signal.

    First, check how your own interface and software send the signal to your headphones.

  • Confusing the manufacturer’s warranty with your statutory rights

    According to the Dutch government, your statutory right to a product that works as it should is separate from any additional manufacturer’s or retailer’s warranty.

    Compare the terms of any additional warranty with your existing rights, and keep your proof of purchase.

Brands to compare

beyerdynamic

The closed-back DT 770 PRO 80 ohm is a useful point of comparison for recording.

  • beyerdynamic lists replaceable ear pads for the DT 770 PRO 80 ohm.
  • Claims about sound and comfort are made by the manufacturer; check the connection and assess the fit of the version you choose for yourself.

Audio-Technica

The closed-back ATH-M50x is worth considering if you want to compare the different cable lengths supplied for use at a standing desk.

  • According to Audio-Technica, three detachable cables and a 6,3mm adapter are included.
  • The manufacturer’s claims about sound and wearing comfort aren’t an independent comparison for this particular choice.

AKG

According to the Dutch product page, the closed-back K371 comes with several detachable cables.

  • The Dutch AKG page lists straight 3 m and 1,2 m cables, as well as replaceable ear pads.
  • Descriptions of neutrality and comfort are manufacturer claims; compare the specified version with the product actually on offer.

RØDE

The NTH-100 is worth considering if you want to connect the cable on either the left or right side of your standing desk.

  • RØDE specifies a detachable 2,4 m cable that can be connected to either earcup.
  • The manufacturer’s claims about sound accuracy and listening fatigue aren’t a comparative performance test.

Sennheiser

The open-back HD 560S is an option for listening back when sound leakage into a microphone isn’t a deciding factor.

  • The Dutch product page confirms the open-back design; the manufacturer positions the model for analytical listening.
  • The open-back design is less suitable for recordings where headphone sound could get into a microphone.

Joybuy products

Related products coming soon.

Frequently asked questions

Will different headphones solve delay while playing?

Not necessarily: the signal path through your interface and software also plays a part. Focusrite explains that direct monitoring on supported interfaces sends the input signal straight to the headphone output. Check the features and settings on your own interface. If you want to hear software effects while playing, check that monitoring path too.

How can I set up headphones for practical use at a standing desk?

Measure the distance from your audio interface to your standing playing position, and check the plug and any adapter you may need. Audio-Technica lists a straight 3,0 m cable among the accessories for the ATH-M50x, while RØDE lists a 2,4 m cable for the NTH-100 that can be connected on either the left or right.

How can I protect my hearing during long recording sessions?

Keep the listening volume low and take breaks. The World Health Organization highlights both sound level and duration of exposure; its example of an average of 80 dB for up to 40 hours a week is general guidance, not a guaranteed safe setting for a specific pair of headphones.

What return and warranty rights apply to online purchases in the Netherlands?

For online distance purchases from a business, the Dutch government says you’ll usually have 14 days to change your mind, although there are exceptions. You’re also entitled to a product that works as it should. The Dutch government states that the Netherlands has no fixed statutory warranty period; a manufacturer’s warranty doesn’t replace your statutory rights.