Guitarist recording with a microphone
Wants to hear the monitor mix without unnecessary headphone sound bleeding into the recording. Closed-back headphones are therefore a sensible starting point for comparison.
If you’re recording your guitar with a microphone, start with wired, closed-back studio headphones. If you’re mainly listening back in a quiet room and sound leakage isn’t a concern, you could also consider an open-back or semi-open model. Also check the connection and whether your audio interface can drive the headphones: switching headphones won’t automatically fix latency in the monitoring path.
Wants to hear the monitor mix without unnecessary headphone sound bleeding into the recording. Closed-back headphones are therefore a sensible starting point for comparison.
Plays through an audio interface and wants to hear their part in time. The connection and monitoring path need to suit the setup.
Reviews recordings or a mix in a quiet room. If sound leakage isn’t a concern, they can also include open-back and semi-open models in their comparison.
Choose this option: if you’re using a microphone while recording guitar or want to limit sound leakage.
Bear in mind: a closed-back design doesn’t guarantee that a microphone won’t pick up sound; also check that your interface can drive the specific version appropriately.
Choose this option: if you mainly listen back or mix in a quiet room, without recording where sound leakage would be a problem.
Bear in mind: open-back headphones aren’t the first choice if sound from them could disrupt a recording or someone else in the room.
Choose this option: if listening back and comfort are your priorities, and sound leakage isn’t a deciding factor.
Bear in mind: semi-open doesn’t mean the isolation is the same as that of a closed-back model; assess sound leakage in your own setup.
Your priorities determine which features matter most: sound leakage when recording with a microphone, a suitable monitoring path while playing, or the ability to listen back in peace.
| What to consider | What to look for | Who should give this more weight? |
|---|---|---|
| Sound leakage when recording | Compare closed-back with open-back or semi-open earcups, and test for sound leakage in your usual setup at your normal monitoring volume. | If I’m recording with a microphone, I want to avoid the monitor mix disturbing the recording or someone else in the room. Around 37% of consumers prioritise limiting sound leakage. |
| Timing and connection | Check your interface output, the plug or adapter you need, and whether you want to monitor directly or through software. Make sure both paths aren’t playing the same signal at once. | If I’m playing through my interface, I want to hear my guitar part without distracting latency or a doubled signal. Around 27% of consumers prioritise monitoring timing and connection. |
| Listening back to recordings | Compare open-back or semi-open models with a closed-back model and decide whether sound leakage is acceptable for your workflow. | If I’m mainly listening back in a quiet room, I want to assess recordings without making isolation my first requirement. Around 18% of consumers prioritise critical listening. |
| Comfort and maintenance | Try the headphones on if possible, and check whether the earpads or cable can be replaced on the specific version. | For longer practice sessions, I want headphones that are comfortable to wear and have parts that can be maintained where needed. Around 18% of consumers prioritise comfort and maintenance. |
Open-back and semi-open models can be suitable for listening back, but their design doesn’t guarantee isolation when tracking with a microphone.
If you’re using a microphone, compare closed-back models first and test for sound leakage in your own recording setup.
Focusrite describes latency as a delay in signal processing. With the Scarlett and Saffire setups mentioned, Direct Monitor can pass the input signal straight through; using direct and software monitoring at the same time can make you hear the same signal twice.
Check your interface and DAW settings, and decide whether you need software effects while you play.
An additional manufacturer’s warranty doesn’t replace your right to a product that is fit for purpose. According to the Government of the Netherlands, the seller is your point of contact for statutory rights.
Keep your proof of purchase and check the terms of any additional warranty separately.
The closed-back DT 770 PRO 80 ohm is a wired option to compare for tracking; pay attention to the exact version.
The closed-back ATH-M40x and ATH-M50x are wired options with detachable cables.
The closed-back MDR-7506 is a wired option for monitoring while recording.
The open-back HD 400 PRO is an option to compare if you mainly listen back or mix in a quiet room.
The semi-open K240 Studio is an alternative to compare for mixing and listening back.
Not necessarily: latency can occur in the recording and playback path. Focusrite explains that Direct Monitor can pass the input signal straight through with the Scarlett and Saffire setups mentioned. Turn off software monitoring at the same time if you hear the signal twice, and check what your own interface can do.
Compare your interface output with the plug and any adapter supplied with the exact version you’ve chosen. According to the model specifications, the beyerdynamic DT 770 PRO 80 ohm has a 3.5-mm plug and a 6.35-mm adapter; check other models separately.
Before buying, check whether replacement parts are available for the specific model. beyerdynamic lists replaceable earpads for the DT 770 PRO 80 ohm; AKG lists a detachable cable and replaceable earpads for the K240 Studio.
For eligible distance purchases from a business, you generally have 14 days to change your mind, according to the Government of the Netherlands. You’re also entitled to a product that is fit for purpose, and can contact the seller about your statutory rights if there’s a problem. The Government of the Netherlands does not specify a fixed statutory warranty period of two years for every product.
Yes. According to the WHO, hearing risks are linked to volume, listening time and how often you listen. Keep the volume down and take regular breaks; a quiet room doesn’t automatically make high headphone volume safe.