Who should consider this choice?

Guitarist recording with a microphone

You want to hear your guitar and click track while playing, without sound from your headphones easily reaching the microphone. RTINGS and Sound On Sound discuss sound leakage as a consideration when recording with a microphone.

Guitarist using an audio interface

You record directly and want to work out whether audible latency is caused by your choice of headphones or by the connection and monitoring chain. Focusrite explains how you can hear direct sound and a delayed DAW signal at the same time.

Listener in a small room

You listen back to recordings or mix more often than you record with an open microphone, and need to weigh comfort against sound leakage. RTINGS and AKG discuss closed-back and semi-open designs for recording and playback.

What should you look for?

First, decide whether you’ll mainly use your headphones while recording with a microphone or when listening back. If you can hear latency, check your monitoring settings before replacing your headphones.

What to consider What should you check? Who should pay particular attention?
Sound leakage when recording Compare closed-back with open-back or semi-open earcups, and make a test recording at the volume you intend to use. If I’m recording with a microphone, I want to stop the guitar or click track bleeding audibly into the recording. Around 31% of consumers put sound leakage at the top of their list of concerns.
Latency and connection Check your interface’s output and connector, the monitoring chain, and whether you need software effects while playing. If I hear latency while playing, I first want to know whether I’m monitoring the signal directly or through software. Around 31% of consumers put monitoring and connection first.
Playback and mixing Consider open-back or semi-open headphones only if sound leakage and background noise are acceptable in your room. If I mainly listen to existing guitar recordings, I want to choose a design that suits how I’ll use it and take into account sound that escapes. Around 23% of consumers prioritise listening back to recordings.
Comfort and maintenance Try them on if possible, and check whether the earpads are replaceable and the cable suits your setup. If I have long sessions, I want my headphones to feel comfortable and be easy to maintain. Around 15% of consumers put comfort and maintenance at the top of their list of concerns.

Common buying mistakes

  • Using open-back or semi-open headphones with a recording microphone without checking for leakage

    Sound can escape from open-back designs and be picked up by the microphone during recording. Closed-back headphones don’t eliminate sound leakage completely either.

    Make a short test recording with your headphones set to the volume you plan to use while playing, then check the result.

    If the click track is audible, you may need to record the take again.

  • Blaming your headphones for latency

    Latency can arise in the signal chain through your computer and software. Hearing direct sound and a delayed DAW signal at the same time can make playing difficult.

    First, test your monitoring settings and work out whether you need software effects while playing.

  • Assuming the impedance rating guarantees enough volume

    How loud your headphones sound also depends on the interface you use and how it works with those headphones.

    Check the specifications for the exact output you’ll use and, if possible, try the combination at a safe listening volume.

Brands to compare

Audio-Technica

The ATH-M40x is a wired, closed-back option for tracking and monitoring.

  • Audio-Technica lists an impedance of 35 ohms, swivel earcups and detachable cables for the ATH-M40x.
  • Claims about accuracy and isolation come from the manufacturer. Check the fit and usable volume with your own setup.

beyerdynamic

The closed-back DT 770 PRO 80 Ohm is a wired option for anyone considering sound leakage while recording.

  • beyerdynamic lists an impedance of 80 ohms and replaceable earpads for this version.
  • Check that your interface’s output can drive this version to a usable volume; the model name alone won’t tell you.

Sony

The MDR-7506 is a wired pair of headphones that Sony offers for recording and studio use.

  • Sony’s Dutch product page lists a 3 m cable and a weight of 230 g for the MDR7506.EU.
  • Sony’s description of these as reference headphones isn’t an independent comparison with other models.

Sennheiser

The closed-back HD 280 PRO is a wired option with a foldable design and replaceable earpads.

  • Sennheiser lists an impedance of 64 ohms and replaceable earpads for the HD 280 PRO.
  • The stated isolation is the manufacturer’s claim, not a measurement in your student room.

AKG

The semi-open K240 Studio is worth considering if you mainly listen back to recordings or mix.

  • According to AKG’s specification sheet, the K240 Studio has an impedance of 55 ohms, a detachable cable and replaceable earpads.
  • If you use them with a recording microphone, bear in mind that sound may leak.

Products at Joybuy

Related products coming soon.

Frequently asked questions

Can you hear the guitar twice when direct monitoring is on?

This can happen if you can hear both the direct input signal and a delayed signal through the DAW. Focusrite describes this with the interface setup mentioned above. Check the manual for your own interface and mute the DAW monitoring path if you’re monitoring directly.

Will any studio headphones work with the same audio interface?

No. First check that the connector or adaptor matches the headphone output. Focusrite points out that impedance alone doesn’t determine whether a combination will sound loud enough for an individual listener.

What should you bear in mind about volume and earpads during long monitoring sessions?

Keep the listening volume down. Thuisarts advises against listening at too high a volume and recommends using a volume limiter where available. If the earpads are worn, check whether they’re replaceable on your exact model.

What are your rights when buying online or receiving a faulty product in the Netherlands?

For many distance purchases by consumers, you have 14 days to change your mind, although there are exceptions. This is separate from your rights if a product is faulty. The Dutch government says there is no fixed statutory guarantee period and that a product must be fit for purpose. Report any fault to the seller.