Guitarist who mainly edits takes
You listen back critically and edit or assess acoustic guitar recordings, usually without an active microphone. An open-back model is worth comparing if the room is quiet and sound leakage is not a concern.
If you mainly edit recordings in a quiet room without an active microphone, compare open-back models. If you also record at the same desk or want more isolation, start with closed-back models. Semi-open models offer a third option, but they are not automatically suitable when you have an active microphone. Also check the fit and connection to your audio interface. In bright daylight, focus on screen glare and your workspace.
You listen back critically and edit or assess acoustic guitar recordings, usually without an active microphone. An open-back model is worth comparing if the room is quiet and sound leakage is not a concern.
You want to prevent sound from your headphones reaching the microphone. Look for a closed-back design and check how well the ear pads fit.
You switch between listening back and editing, so fit and cable use matter. Tackle window glare by adjusting your workspace, not by choosing a different acoustic type of headphones.
When: if you mainly edit in a quiet room and sound leakage is not a concern. Sennheiser and beyerdynamic respectively list the HD 490 PRO and DT 900 PRO X as open-back models.
Consider: ambient noise and sound leaking from the headphones remain factors to bear in mind. Also check that the model is suitable for your equipment’s output.
When: if you also record with a microphone in the same place or need more isolation. The beyerdynamic DT 770 PRO 80 ohm and Audio-Technica ATH-M50x are examples of closed-back models.
Consider: fit and seal matter. According to beyerdynamic, the DT 770 PRO has a fixed cable, while Audio-Technica says the ATH-M50x has a detachable cable.
When: if you want to compare a third design, mainly for listening back, and strong isolation is not essential. AKG describes the K240 Studio as semi-open.
Consider: semi-open does not automatically mean that little sound will leak into an active microphone; assess it in your own setup.
| What to consider | What should you check? | Who is this most important for? |
|---|---|---|
| Listening back | Compare open-back models with familiar guitar recordings at a comfortable listening volume, and decide whether sound leakage is acceptable in your workspace. | If I mainly want to assess details in my recordings, I start by considering my listening setup. Around 31% of consumers prioritise listening back when choosing. |
| Sound leakage and isolation | Check whether the model is closed-back and whether the ear pads fit well in your setup. | If I record beside an active microphone or share my desk, I want to account for sound that could reach the microphone. Around 25% of consumers prioritise reducing sound leakage or ambient noise. |
| Fit and workspace | Assess the fit and check whether the ear pads are replaceable. If screen glare is a problem, Arboportaal recommends positioning your line of sight parallel to the window or using suitable blinds. | For long editing sessions, I want a comfortable fit and a workspace where I can see the screen. Around 25% of consumers prioritise fit and comfort during extended use. |
| Connection and monitoring | Check your interface’s headphone output, the plug and any adapter. If you also play along, find out what direct monitoring feature your interface offers. | If I listen or play along through my interface, I want to know whether the connection and monitoring suit my setup. Around 19% of consumers prioritise connection and monitoring over the other factors. |
Sound from the headphones can be picked up by the microphone and affect a take. You may have to record it again.
Decide in advance whether you will only be editing or also recording at the same desk. If you will be recording too, compare closed-back models and check for sound leakage in your own setup.
The right connection and a usable listening volume depend partly on the interface you use and the exact model version.
Check your equipment’s headphone output, cable and any adapter. Assess the volume at a comfortable level.
Bright daylight can make it difficult to see your screen, whether you choose an open-back, semi-open or closed-back design.
For screen-based work, Arboportaal recommends, among other things, positioning your line of sight parallel to the window; blinds can also help. Choose your headphone type separately, based on how you listen and record.
Compare the closed-back DT 770 PRO 80 ohm for monitoring with the open-back DT 900 PRO X for listening back. Always check the exact model version.
The open-back HD 490 PRO is worth comparing if you want to edit and mix without needing isolation.
The closed-back ATH-M50x is worth comparing if you also monitor while recording and want a detachable cable.
The semi-open K240 Studio is a third design worth comparing if strong isolation is not essential.
The wired, closed-back MDR-7506 is another option worth comparing for monitoring.
A Joybuy product selection related to this topic. Check that the wireless version and connection options suit your interface and monitoring setup.
No image available
A wireless over-ear option if you are also looking for headphones for listening in situations beyond studio work. Check in advance that the connection options suit your interface.
The product name lists noise cancelling, 60-hour battery life, fast charging and 4 microphones.
No. Daylight alone does not determine whether an open-back or closed-back design is right for you. If screen glare is a problem, Arboportaal recommends, among other things, positioning your line of sight parallel to the window or using suitable blinds. Choose your headphone type based on how you listen and record.
That depends on your interface’s output and the cable supplied with the exact headphone model. For example, Focusrite lists a 6.35 mm TRS headphone output for the Scarlett Solo 4th Gen; beyerdynamic lists a 3.5 mm plug with a 6.35 mm adapter for the DT 770 PRO 80 ohm.
Not necessarily. If you also play guitar along with the recording, check your interface’s monitoring route: Focusrite says that direct monitoring on supported interfaces sends the input signal to the headphone output with almost no delay.
Check the instructions for the exact model and whether the ear pads are replaceable. Sennheiser lists replaceable, washable pads for the HD 490 PRO; AKG lists replaceable ear pads for the K240 Studio.
For online consumer purchases, you generally have a 14-day cooling-off period after delivery, subject to exceptions; ACM ConsuWijzer explains these rules. Your statutory guarantee is separate from any manufacturer’s warranty and depends on what you could reasonably expect from the product. The rules on daily noise exposure described by Arboportaal apply to employees and employers in the workplace; they are not product specifications for every private buyer. The World Health Organization points out that both volume and listening time matter.