Who is this relevant to?

Mixing a folk demo in a quiet room

You want to assess vocals, guitar and spaciousness over long sessions, and can use open-back headphones without recording through a microphone at the same time. Sennheiser describes the HD 560S as an open-back model; whether it suits you also depends on your room and how it fits.

Recording singer-songwriter

You want to hear yourself while recording vocals or acoustic guitar, while limiting sound leakage into the microphone. Sonarworks describes closed-back headphones as an option for limiting sound escaping outwards; Audio-Technica recommends the ATH-M40x for tracking and mixing.

Mixing at a two-monitor workstation

You want to choose a comfortable fit and a cable route and connection that work with your computer or audio interface for longer sessions. Focusrite recommends connecting headphones directly to the interface for the Scarlett, Clarett and Vocaster interfaces mentioned.

What to consider when choosing

First, decide whether you’ll also be recording while you mix. Then compare sound monitoring, fit and connectivity with your own setup.

What to consider What should you check? Who is this important to?
Mix balance and stereo image Assess the model’s fit and listening experience; also check a test mix on speakers or another familiar playback system. If you need vocals, acoustic instruments and reverb to translate well to other playback systems, prioritise this mix check. Around 36% of consumers in this situation put mix translation first.
Sound leakage while recording Check that the exact model is closed-back, and test it with your own microphone at a sensible listening volume. If you’re recording vocals or guitar while listening to the backing track, you’ll want to prevent it from being picked up audibly by the microphone. Around 29% of consumers give recording isolation top priority.
Fit and cable route Work out where the audio output is and how the cable will run around your workspace; try the fit, including with glasses if you wear them. During long sessions at a two-monitor setup, you’ll want a comfortable fit and a cable that doesn’t get in the way. For around 21% of consumers, comfort and cable routing are the main concerns.
Connection and output Check the plug, any adapter and the specifications of your computer or interface output. Also check which output you’ve selected in your audio software. If you first want to make sure the headphones connect to your actual audio source and work as intended, these details are decisive. Around 14% of consumers prioritise connection compatibility.

Common buying mistakes

  • Assuming a wide frequency range means neutral sound for mixing

    A frequency range on a specification sheet doesn’t, by itself, prove how a pair of headphones sounds. As a result, a mix decision could turn out differently when you hear the mix on another playback system.

    Assess the exact model and listen to your test mix through something other than the headphones.

  • Using open-back or semi-open headphones for vocal recording without testing for leakage

    Sound from the headphones may be picked up audibly during a microphone recording, making the recording harder to edit.

    If you’re recording and monitoring at the same time, compare closed-back models first and test for sound leakage with your own microphone and setup.

    If the backing track leaks into the microphone, you may need to record the take again.

  • Choosing based only on the ohm rating or an adapter

    Impedance alone doesn’t give you the full picture of how easy the headphones are to drive. An adapter, by itself, doesn’t change what your computer or interface output can provide.

    Check the relevant headphone specifications alongside those of your own audio output before ordering.

Brands to compare

The points below apply to the models and versions mentioned, not automatically to the brand as a whole.

Audio-Technica

Audio-Technica says the closed-back ATH-M40x is designed for tracking and mixing.

  • Audio-Technica lists two included cables: a 3,0 m straight cable and a 1,2–3,0 m coiled cable.
  • The manufacturer’s claim of accurate sound reproduction isn’t an independent measurement and doesn’t tell you whether the fit will suit you.

beyerdynamic

The DT 770 PRO 80 Ohm is a closed-back monitoring model; the DT 770 PRO X is a separate version.

  • beyerdynamic lists replaceable parts for the DT 770 PRO.
  • Check the impedance variant and version. The detachable cable on the DT 770 PRO X isn’t automatically available on the DT 770 PRO 80 Ohm.

Sennheiser

The open-back HD 560S is a model worth considering for listening in a quiet room.

  • Sennheiser lists ventilated ear cups and velour ear pads.
  • Comfort varies from person to person. An open-back design blocks out less background noise and may leak sound into a microphone.

AKG

AKG describes the semi-open K240 Studio as suitable for applications such as mixing, mastering and playback.

  • The Dutch manufacturer’s page lists a 3 m cable, a detachable cable and replaceable ear pads.
  • A semi-open design isn’t the same as the recording isolation provided by a well-fitting pair of closed-back headphones.

Sony

The closed-back MDR-7506 is a model worth comparing for checking recordings at a fixed workstation.

  • Sony lists a 9,8 ft cable and a 3,5 mm connection with a 6,3 mm connection.
  • These product specifications don’t prove that the sound is the right choice for every folk demo.

Joybuy products

Below are Joybuy headphones and headsets for listening on a computer. For each model, check that the connections and listening features listed suit your audio interface and the way you mix or record.

Sennheiser MOMENTUM 4 Wireless over-ear headphones

Sennheiser MOMENTUM 4 Wireless, wireless over-ear headphones

Worth considering if you’re looking for a wired listening option; the product description lists wired use with the included 3,5 mm audio cable.

The product name lists noise cancelling, 60-hour battery life, quick charging and four microphones.

View at Joybuy
Jabra Evolve2 30 SE stereo headset

Jabra Evolve2 30 SE stereo headset

Worth considering if you’re looking for a computer headset with a USB-A connection; the product description lists USB-A.

View at Joybuy
Jabra Evolve2 75 headset

Jabra Evolve2 75 headset

Worth considering if you want to use a wired connection as well as Bluetooth; the product description lists a USB-C cable for wired use.

View at Joybuy
Jabra Evolve2 55 wireless stereo headset

Jabra Evolve2 55 wireless stereo headset

Worth considering if you want to connect a laptop via USB; the product description lists a Link 380 USB Bluetooth adapter.

The product name lists noise-cancelling microphones and ANC.

View at Joybuy

Frequently asked questions

Do you need different headphones for a two-monitor setup?

No, not by itself. Work out which computer or interface output you’ll use and whether the cable will reach comfortably across your workspace between the monitors. Focusrite advises users of the Scarlett, Clarett and Vocaster interfaces mentioned to connect their headphones directly to the interface; this advice applies to those interfaces.

How can you check your folk demo mix without relying on headphones alone?

Listen on speakers or another familiar playback system too, paying attention to vocal balance, bass, reverb and stereo width. Sonarworks notes that headphones and speakers reproduce stereo sound differently.

What should you look for during longer listening sessions and when it comes to maintenance?

Try the fit and keep the volume at a sensible level. VeiligheidNL recommends well-fitting headphones, as this means you’re less likely to need to turn the volume up to drown out background noise. Check whether the cable and ear pads are replaceable for the exact model.

What are your rights as a Dutch consumer when buying online?

For online consumer purchases, you generally have a 14-day cooling-off period after delivery, subject to legal exceptions, according to ACM ConsuWijzer. Your statutory guarantee is separate from any manufacturer’s warranty: if a product doesn’t perform as you could reasonably expect under normal use, contact the seller.

Does every wired pair of studio headphones need a CE marking?

Not automatically: according to the European Commission, CE marking is only required when the applicable harmonised EU rules specify it for the product. Check the rules that apply to the exact version; don’t assume the same applies to all wired headphones.